| S1F1R | Are You Online? |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 1, secs_receive_S1F1R)
def secs_receive_S1F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F1R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S1F1R
| S1F2 | On Line Data |
Different Host and Equipment Use |
Comment: Equipment sends the reply to indicate an online control state, otherwise an abort reply is seen.
Equipment Send Format:
Host Send Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F2 Python Parse Equipment reply
rcr = sp.sendSecsMsg(1, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 MDLN SOFTREV
# MDLN A:20 (always) equipment model type
# SOFTREV A:20 (always) software revision
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
MDLN = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SOFTREV = (pylist1[1] if len(pylist1) == 2 else "")
return # finished ok
# end while(ok)
# end def
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F2 Python Parse Host reply
rcr = sp.sendSecsMsg(1, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:0
pylist0 = lsplit(TSN_data)
if len(pylist0) != 1 or pylist0[0] != "L:0":
ok = False
break
# single token data such as L:0 or U4:0 has been received as expected
return # finished ok
# end while(ok)
# end def
| S1F3R | Selected Equipment Status Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 3, secs_receive_S1F3R)
def secs_receive_S1F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F3R.'''
ok = True
while ok: # break out of loop on error
# expect L:n SVID
# SVID U4:1 (varies) status variable ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeSVID, lengthSVID) = pylist1[0].split(':')
SVID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S1F3R
| S1F4 | Selected Equipment Status Data |
Sent by Equipment Only |
Comment: zero length value returned for unknown SVID
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F4 Python Parse reply
rcr = sp.sendSecsMsg(1, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n SV
# SV A:n (varies) status variable value
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeSV, lengthSV) = pylist1[0].split(':')
SV = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S1F5R | Formatted Status Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 5, secs_receive_S1F5R)
def secs_receive_S1F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F5R.'''
ok = True
while ok: # break out of loop on error
# expect SFCD
# SFCD B:1 (always) status form code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
SFCD = sp.binToInt(pylist0[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S1F5R
| S1F6 | Formatted Status Data |
Sent by Equipment Only |
Comment: message structure varies, superseded by dynamic reports
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F6 Python Parse reply
rcr = sp.sendSecsMsg(1, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n SV
# SV A:n (varies) status variable value
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeSV, lengthSV) = pylist1[0].split(':')
SV = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S1F7 | Fixed Form Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F7 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 7, secs_receive_S1F7)
def secs_receive_S1F7(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F7.'''
ok = True
while ok: # break out of loop on error
# expect SFCD
# SFCD B:1 (always) status form code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
SFCD = sp.binToInt(pylist0[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S1F7
| S1F8 | Fixed Form Data |
Sent by Equipment Only |
Comment: format varies, superseded by dynamic reports
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F8 Python Parse reply
rcr = sp.sendSecsMsg(1, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:2 SVNAME SV0}
# SVNAME A:n (always) status variable name
# SV0 A:0 (varies) Zero length value used to convey format type
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
SVNAME = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
#(typeSV0, lengthSV0) = pylist2[0].split(':')
SV0 = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S1F9R | Material Transfer Status Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F9R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 9, secs_receive_S1F9R)
def secs_receive_S1F9R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F9R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S1F9R
| S1F10 | Material Transfer Status Data |
Sent by Equipment Only |
Comment: An L:0 reply can be sent if there are no material ports
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F10 Python Parse reply
rcr = sp.sendSecsMsg(1, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 TSIP TSOP
# TSIP (list)B:n (always) transfer status of input ports
# TSOP (list)B:n (always) transfer status of output ports
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("B:"):
ok = False
break
TSIP = []
for i in range(0, len(TSIP)):
TSIP.append(sp.binToInt(pylist1[1+i])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("B:"):
ok = False
break
TSOP = []
for i in range(0, len(TSOP)):
TSOP.append(sp.binToInt(pylist1[1+i])
return # finished ok
# end while(ok)
# end def
| S1F11R | Status Variable Namelist Request |
Sent by Host Only |
Comment: Host sends L:0 to request all SVIDs.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F11R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 11, secs_receive_S1F11R)
def secs_receive_S1F11R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F11R.'''
ok = True
while ok: # break out of loop on error
# expect L:n SVID
# SVID U4:1 (varies) status variable ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeSVID, lengthSVID) = pylist1[0].split(':')
SVID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S1F11R
| S1F12 | Status Variable Namelist Reply |
Sent by Equipment Only |
Comment: A:0 for SVNAME and UNITS indicates unknown SVID
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F12 Python Parse reply
rcr = sp.sendSecsMsg(1, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:3 SVID SVNAME UNITS}
# SVID U4:1 (varies) status variable ID
# SVNAME A:n (always) status variable name
# UNITS A:n (always) units identifier (see E5 Section 9)
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 4 or pylist1[0] != "L:3":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeSVID, lengthSVID) = pylist2[0].split(':')
SVID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
SVNAME = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
UNITS = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S1F13R | Establish Communications Request |
Different Host and Equipment Use |
Equipment Send Format:
Host Send Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F13R Python Receive Equipment message - add next line to setupn
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 13, secs_receive_S1F13R)
def secs_receive_S1F13R(sp:SecsHost, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 MDLN SOFTREV
# MDLN A:20 (always) equipment model type
# SOFTREV A:20 (always) software revision
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
MDLN = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SOFTREV = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S1F13R
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F13R Python Receive Host message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 13, secs_receive_S1F13R)
def secs_receive_S1F13R(sp:SecsEquip, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:0
pylist0 = lsplit(TSN_data)
if len(pylist0) != 1 or pylist0[0] != "L:0":
ok = False
break
# single token data such as L:0 or U4:0 has been received as expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S1F13R
| S1F14 | Establish Communications Request Acknowledge |
Different Host and Equipment Use |
Comment: MDLN and SOFTREV may not be valid unless COMMACK value is 0
Equipment Send Format:
Host Send Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F14 Python Parse Equipment reply
rcr = sp.sendSecsMsg(1, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 COMMACK {L:2 MDLN SOFTREV}
# COMMACK B:1 (always) establish communications acknowledgement code
# MDLN A:20 (always) equipment model type
# SOFTREV A:20 (always) software revision
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
COMMACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
MDLN = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
SOFTREV = (pylist2[1] if len(pylist2) == 2 else "")
return # finished ok
# end while(ok)
# end def
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F14 Python Parse Host reply
rcr = sp.sendSecsMsg(1, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 COMMACK L:0
# COMMACK B:1 (always) establish communications acknowledgement code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
COMMACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 1 or pylist1[0] != "L:0":
ok = False
break
# single token data such as L:0 or U4:0 has been received as expected
return # finished ok
# end while(ok)
# end def
| S1F15R | Request OFF-LINE |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 15, secs_receive_S1F15R)
def secs_receive_S1F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F15R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S1F15R
| S1F16 | OFF-LINE Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F16 Python Parse reply
rcr = sp.sendSecsMsg(1, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect OFLACK
# OFLACK B:1 (always) offline acknowledge, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
OFLACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S1F17R | Request ON-LINE |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 17, secs_receive_S1F17R)
def secs_receive_S1F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F17R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S1F17R
| S1F18 | ON-LINE Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F18 Python Parse reply
rcr = sp.sendSecsMsg(1, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ONLACK
# ONLACK B:1 (always) online acknowledge, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ONLACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S1F19R | Get Attribute |
Sent by Host and Equipment |
Comment: L:m = L:0 for all objects, L:n = L:0 for all attributes
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F19R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 19, secs_receive_S1F19R)
def secs_receive_S1F19R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F19R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 OBJTYPE {L:m OBJID} {L:n ATTRID}
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist2[0].split(':')
OBJID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist2[0].split(':')
ATTRID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S1F19R
| S1F20 | Attribute Data |
Sent by Host and Equipment |
Comment: Ordered per request., m=0 means OBJTYPE unknown, n=0 means instance not found, error associations are problematic
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F20 Python Parse reply
rcr = sp.sendSecsMsg(1, 19, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:m {L:n ATTRDATA}} {L:p {L:2 ERRCODE ERRTEXT}}
# ATTRDATA A:n (varies) a specific attribute value of any data type
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S1F21R | Data Variable Namelist Request |
Sent by Host Only |
Comment: Host sends L:0 to request all DVVALs. VIDs are limited to DVVAL variables only. (proposed ballot item 4824B, Oct 2011)
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F21R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 21, secs_receive_S1F21R)
def secs_receive_S1F21R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F21R.'''
ok = True
while ok: # break out of loop on error
# expect L:n VID
# VID A:n (varies) A variable ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist1[0].split(':')
VID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 22, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S1F21R
| S1F22 | Data Variable Namelist Reply |
Sent by Equipment Only |
Comment: A:0 for DVVALNAME and UNITS indicates unknown VID or that VID is not a DVVAL. (proposed ballot item 4824B, Oct 2011)
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F22 Python Parse reply
rcr = sp.sendSecsMsg(1, 21, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:3 VID DVVALNAME UNITS}
# VID A:n (varies) A variable ID
# DVVALNAME A:n (always) a descriptive name for a Data Value variable (DVVAL)
# UNITS A:n (always) units identifier (see E5 Section 9)
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 4 or pylist1[0] != "L:3":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist2[0].split(':')
VID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
DVVALNAME = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
UNITS = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S1F23R | Collection Event Namelist Request |
Sent by Host Only |
Comment: Host sends L:0 to imply all CEIDs. (proposed ballot item 4824B, Oct 2011)
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F23R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 1, 23, secs_receive_S1F23R)
def secs_receive_S1F23R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S1F23R.'''
ok = True
while ok: # break out of loop on error
# expect L:n CEID
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 1, 24, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S1F23R
| S1F24 | Collection Event Namelist Reply |
Sent by Equipment Only |
Comment: Only associated DVVAL VIDs are listed. A:0 for CENAME and L:0 for L:a indicates non-existent CEID. (proposed ballot item 4824B, Oct 2011)
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S1F24 Python Parse reply
rcr = sp.sendSecsMsg(1, 23, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:3 CEID CENAME {L:a VID}}
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# CENAME A:n (always) a descriptive name for a Data Collection Event
# VID A:n (varies) A variable ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 4 or pylist1[0] != "L:3":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist2[0].split(':')
CEID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
CENAME = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1:
ok = False
break
for a in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[a])
if len(pylist3) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist3[0].split(':')
VID = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F1 | Service Program Load Inquire |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F1 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 1, secs_receive_S2F1)
def secs_receive_S2F1(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F1.'''
ok = True
while ok: # break out of loop on error
# expect L:2 SPID LENGTH
# SPID A:6 (always) service program identifier
# LENGTH U4:1 (always) program length in bytes
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SPID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
LENGTH = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S2F1
| S2F2 | Service Program Load Grant |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F2 Python Parse reply
rcr = sp.sendSecsMsg(2, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect GRANT
# GRANT B:1 (always) multiblock grant code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
GRANT = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S2F3 | Service Program Send |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F3 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 3, secs_receive_S2F3)
def secs_receive_S2F3(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F3.'''
ok = True
while ok: # break out of loop on error
# expect SPD
# SPD (list)B:n (always) service program data
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("B:"):
ok = False
break
SPD = []
for i in range(0, len(SPD)):
SPD.append(sp.binToInt(pylist0[1+i])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S2F3
| S2F4 | Service Program Send Acknowledge |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F4 Python Parse reply
rcr = sp.sendSecsMsg(2, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect SPAACK
# SPAACK U1:1 (always) service completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
SPAACK = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S2F5 | Service Program Load Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F5 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 5, secs_receive_S2F5)
def secs_receive_S2F5(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F5.'''
ok = True
while ok: # break out of loop on error
# expect SPID
# SPID A:6 (always) service program identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("A:"):
ok = False
break
SPID = (pylist0[1] if len(pylist0) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S2F5
| S2F6 | Service Program Load Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F6 Python Parse reply
rcr = sp.sendSecsMsg(2, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect SPD
# SPD (list)B:n (always) service program data
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("B:"):
ok = False
break
SPD = []
for i in range(0, len(SPD)):
SPD.append(sp.binToInt(pylist0[1+i])
return # finished ok
# end while(ok)
# end def
| S2F7 | Service Program Run Send |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F7 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 7, secs_receive_S2F7)
def secs_receive_S2F7(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F7.'''
ok = True
while ok: # break out of loop on error
# expect SPID
# SPID A:6 (always) service program identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("A:"):
ok = False
break
SPID = (pylist0[1] if len(pylist0) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S2F7
| S2F8 | Service Program Run Acknowledge |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F8 Python Parse reply
rcr = sp.sendSecsMsg(2, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect CSAACK
# CSAACK U1:1 (always) equipment acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
CSAACK = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S2F9 | Service Program Results Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F9 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 9, secs_receive_S2F9)
def secs_receive_S2F9(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F9.'''
ok = True
while ok: # break out of loop on error
# expect SPID
# SPID A:6 (always) service program identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("A:"):
ok = False
break
SPID = (pylist0[1] if len(pylist0) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S2F9
| S2F10 | Service Program Results Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F10 Python Parse reply
rcr = sp.sendSecsMsg(2, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect SPR
# SPR A:n (varies) device dependent, any data type
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeSPR, lengthSPR) = pylist0[0].split(':')
SPR = (pylist0[1] if len(pylist0) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S2F11 | Service Program Directory Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F11 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 11, secs_receive_S2F11)
def secs_receive_S2F11(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F11.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S2F11
| S2F12 | Service Program Directory Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F12 Python Parse reply
rcr = sp.sendSecsMsg(2, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n SPID
# SPID A:6 (always) service program identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SPID = (pylist1[1] if len(pylist1) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F13R | Equipment Constant Request |
Sent by Host Only |
Comment: Host sends L:0 to receive all in predefined order
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 13, secs_receive_S2F13R)
def secs_receive_S2F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:n ECID
# ECID U4:1 (varies) equipment constant ID, GEM requires U4
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeECID, lengthECID) = pylist1[0].split(':')
ECID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F13R
| S2F14 | Equipment Constant Data |
Sent by Equipment Only |
Comment: An L:0 is substituted if an ECID does not exist, L format is not allowed for an ECV.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F14 Python Parse reply
rcr = sp.sendSecsMsg(2, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n ECV
# ECV A:n (varies) equipment constant value, any scalar type (constant is a misnomer)
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeECV, lengthECV) = pylist1[0].split(':')
ECV = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F15R | New Equipment Constant Send |
Sent by Host Only |
Comment: Constant is a misnomer, they are settable parameters.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 15, secs_receive_S2F15R)
def secs_receive_S2F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F15R.'''
ok = True
while ok: # break out of loop on error
# expect L:n {L:2 ECID ECV}
# ECID U4:1 (varies) equipment constant ID, GEM requires U4
# ECV A:n (varies) equipment constant value, any scalar type (constant is a misnomer)
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeECID, lengthECID) = pylist2[0].split(':')
ECID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
#(typeECV, lengthECV) = pylist2[0].split(':')
ECV = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F15R
| S2F16 | New Equipment Constant Ack |
Sent by Equipment Only |
Comment: if any input value is not proper, none of the input values are set
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F16 Python Parse reply
rcr = sp.sendSecsMsg(2, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect EAC
# EAC B:1 (always) equipment acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
EAC = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S2F17R | Date and Time Request |
Sent by Host and Equipment |
Comment: NTP servers should be used instead for better accuracy and to avoid lack of time zone specification.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 17, secs_receive_S2F17R)
def secs_receive_S2F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F17R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S2F17R
| S2F18 | Date and Time Data |
Sent by Host and Equipment |
Comment: The value should not be used for system clock synchronization.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F18 Python Parse reply
rcr = sp.sendSecsMsg(2, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect TIME
# TIME A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("A:"):
ok = False
break
TIME = (pylist0[1] if len(pylist0) == 2 else "")
return # finished ok
# end while(ok)
# end def
| S2F19R | Reset/Initialize Send |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F19R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 19, secs_receive_S2F19R)
def secs_receive_S2F19R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F19R.'''
ok = True
while ok: # break out of loop on error
# expect RIC
# RIC U1:1 (varies) reset code, 1 means power up reset
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeRIC, lengthRIC) = pylist0[0].split(':')
RIC = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F19R
| S2F20 | Reset Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F20 Python Parse reply
rcr = sp.sendSecsMsg(2, 19, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect RAC
# RAC U1:1 (varies) reset acknowledge
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeRAC, lengthRAC) = pylist0[0].split(':')
RAC = (pylist0[1] if len(pylist0) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S2F21[R] | Remote Command Send |
Sent by Host Only |
Comment: Compare to S2F41R. Arguments can be passed as you would on a command line.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F21 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 21, secs_receive_S2F21)
def secs_receive_S2F21(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F21.'''
ok = True
while ok: # break out of loop on error
# expect RCMD
# RCMD A:n (varies) remote command, GEM requires a maximum length of 20 printable characters, taken from hex 21-7E (no spaces)
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeRCMD, lengthRCMD) = pylist0[0].split(':')
RCMD = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 22, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F21
| S2F22 | Remote Command Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F22 Python Parse reply
rcr = sp.sendSecsMsg(2, 21, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect CMDA
# CMDA B:1 (always) command acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
CMDA = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S2F23R | Trace Initialize Send |
Sent by Host Only |
Comment: Set TOTSMP=0 to terminate a trace. Set zero-length TRID to delete all traces.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F23R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 23, secs_receive_S2F23R)
def secs_receive_S2F23R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F23R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 TRID DSPER TOTSMP REPGSZ {L:n SVID}
# TRID A:n (varies) trace request ID
# DSPER A:6 (varies) data sample period, hhmmss is always supported, A:8 hhmmsscc may be supported
# TOTSMP U4:1 (varies) total samples to be made, should be an even multiple of REPGSZ
# REPGSZ U4:1 (varies) reporting group size, TOTSMP modulo REPGSZ should be 0
# SVID U4:1 (varies) status variable ID
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist1[0].split(':')
TRID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeDSPER, lengthDSPER) = pylist1[0].split(':')
DSPER = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeTOTSMP, lengthTOTSMP) = pylist1[0].split(':')
TOTSMP = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeREPGSZ, lengthREPGSZ) = pylist1[0].split(':')
REPGSZ = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeSVID, lengthSVID) = pylist2[0].split(':')
SVID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 24, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F23R
| S2F24 | Trace Initialize Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F24 Python Parse reply
rcr = sp.sendSecsMsg(2, 23, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect TIAACK
# TIAACK B:1 (always) trace acknowledgement code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
TIAACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S2F25R | Loopback Diagnostic Request |
Sent by Host and Equipment |
Comment: it is useful to test the telnet escape sequence
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F25R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 25, secs_receive_S2F25R)
def secs_receive_S2F25R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F25R.'''
ok = True
while ok: # break out of loop on error
# expect ABS
# ABS (list)B:n (always) any binary string
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("B:"):
ok = False
break
ABS = []
for i in range(0, len(ABS)):
ABS.append(sp.binToInt(pylist0[1+i])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 26, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S2F25R
| S2F26 | Loopback Diagnostic Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F26 Python Parse reply
rcr = sp.sendSecsMsg(2, 25, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ABS
# ABS (list)B:n (always) any binary string
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("B:"):
ok = False
break
ABS = []
for i in range(0, len(ABS)):
ABS.append(sp.binToInt(pylist0[1+i])
return # finished ok
# end while(ok)
# end def
| S2F27R | Initiate Processing Request |
Sent by Host Only |
Comment: made obsolete by S2F41R ?
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F27R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 27, secs_receive_S2F27R)
def secs_receive_S2F27R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F27R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 LOC PPID {L:n MID}
# LOC B:1 (always) material location code
# PPID A:80 (varies) process program ID
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
LOC = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist2[0].split(':')
MID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 28, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F27R
| S2F28 | Initiate Processing Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F28 Python Parse reply
rcr = sp.sendSecsMsg(2, 27, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect CMDA
# CMDA B:1 (always) command acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
CMDA = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S2F29R | Equipment Constant Namelist Request |
Sent by Host Only |
Comment: Host sends L:0 for all ECIDs
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F29R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 29, secs_receive_S2F29R)
def secs_receive_S2F29R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F29R.'''
ok = True
while ok: # break out of loop on error
# expect L:n ECID
# ECID U4:1 (varies) equipment constant ID, GEM requires U4
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeECID, lengthECID) = pylist1[0].split(':')
ECID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 30, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F29R
| S2F30 | Equipment Constant Namelist |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F30 Python Parse reply
rcr = sp.sendSecsMsg(2, 29, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:6 ECID ECNAME ECMIN ECMAX ECDEF UNITS}
# ECID U4:1 (varies) equipment constant ID, GEM requires U4
# ECNAME A:n (always) equipment constant name
# ECMIN A:n (varies) equipment constant minimum value, any scalar type
# ECMAX A:n (varies) equipment constant maximum value, any scalar type
# ECDEF A:n (varies) equipment constant default value
# UNITS A:n (always) units identifier (see E5 Section 9)
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 7 or pylist1[0] != "L:6":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeECID, lengthECID) = pylist2[0].split(':')
ECID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
ECNAME = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1:
ok = False
break
#(typeECMIN, lengthECMIN) = pylist2[0].split(':')
ECMIN = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[4])
if len(pylist2) < 1:
ok = False
break
#(typeECMAX, lengthECMAX) = pylist2[0].split(':')
ECMAX = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[5])
if len(pylist2) < 1:
ok = False
break
#(typeECDEF, lengthECDEF) = pylist2[0].split(':')
ECDEF = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[6])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
UNITS = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F31R | Date and Time Set Request |
Sent by Host Only |
Comment: Modern equipment should use NTP servers to synchronize the system clock. SECS is inaccurate and does not include timezone info.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F31R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 31, secs_receive_S2F31R)
def secs_receive_S2F31R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F31R.'''
ok = True
while ok: # break out of loop on error
# expect TIME
# TIME A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("A:"):
ok = False
break
TIME = (pylist0[1] if len(pylist0) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 32, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F31R
| S2F32 | Date and Time Set Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F32 Python Parse reply
rcr = sp.sendSecsMsg(2, 31, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect TIACK
# TIACK B:1 (always) time set acknowledge
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
TIACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S2F33R | Define Report |
Sent by Host Only |
Comment: a=0 means delete all reports and event links, b=0 means delete the RPTID type and its event links
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F33R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 33, secs_receive_S2F33R)
def secs_receive_S2F33R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F33R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 DATAID {L:a {L:2 RPTID {L:b VID}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# RPTID U4:1 (varies) report ID
# VID A:n (varies) A variable ID
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for a in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[a])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist3[0].split(':')
RPTID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for b in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[b])
if len(pylist4) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist4[0].split(':')
VID = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 34, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F33R
| S2F34 | Define Report Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F34 Python Parse reply
rcr = sp.sendSecsMsg(2, 33, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect DRACK
# DRACK B:1 (always) define report acknowledge
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
DRACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S2F35R | Link Event Report |
Sent by Host Only |
Comment: b=0 disassociates the CEID from all report links. The message links reports to an event, it does not imply a particular output sequence in the event report.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F35R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 35, secs_receive_S2F35R)
def secs_receive_S2F35R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F35R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 DATAID {L:a {L:2 CEID {L:b RPTID}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# RPTID U4:1 (varies) report ID
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for a in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[a])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist3[0].split(':')
CEID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for b in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[b])
if len(pylist4) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist4[0].split(':')
RPTID = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 36, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F35R
| S2F36 | Link Event Report Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F36 Python Parse reply
rcr = sp.sendSecsMsg(2, 35, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect LRACK
# LRACK B:1 (always) link report acknowledge
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
LRACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S2F37R | Enable/Disable Event Report |
Sent by Host Only |
Comment: n=0 means all CEIDs
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F37R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 37, secs_receive_S2F37R)
def secs_receive_S2F37R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F37R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 CEED {L:n CEID}
# CEED TF:1 (always) collection event or trace enablement, true is enabled
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
CEED = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist2[0].split(':')
CEID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 38, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F37R
| S2F38 | Enable/Disable Event Report Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F38 Python Parse reply
rcr = sp.sendSecsMsg(2, 37, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ERACK
# ERACK B:1 (always) enable/disable event report acknowledge
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ERACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S2F39R | Multi-block Inquire |
Sent by Host Only |
Comment: for SECS-I mullti-block S2F23 F33, F35, F45, or F49, not required for HSMS
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F39R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 39, secs_receive_S2F39R)
def secs_receive_S2F39R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F39R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 DATAID DATALENGTH
# DATAID U4:1 (varies) an identifier to correlate related messages
# DATALENGTH U4:1 (varies) total bytes of the message body
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeDATALENGTH, lengthDATALENGTH) = pylist1[0].split(':')
DATALENGTH = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 40, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F39R
| S2F40 | Multi-block Grant |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F40 Python Parse reply
rcr = sp.sendSecsMsg(2, 39, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect GRANT
# GRANT B:1 (always) multiblock grant code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
GRANT = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S2F41R | Host Command Send |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F41R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 41, secs_receive_S2F41R)
def secs_receive_S2F41R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F41R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 RCMD {L:n {L:2 CPNAME CPVAL}}
# RCMD A:n (varies) remote command, GEM requires a maximum length of 20 printable characters, taken from hex 21-7E (no spaces)
# CPNAME A:n (varies) command parameter name
# CPVAL A:n (varies) command parameter value, any scalar type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeRCMD, lengthRCMD) = pylist1[0].split(':')
RCMD = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCPNAME, lengthCPNAME) = pylist3[0].split(':')
CPNAME = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeCPVAL, lengthCPVAL) = pylist3[0].split(':')
CPVAL = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 42, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F41R
| S2F42 | Host Command Acknowledge |
Sent by Equipment Only |
Comment: n is equal to the number of parameters having errors
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F42 Python Parse reply
rcr = sp.sendSecsMsg(2, 41, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 HCACK {L:n {L:2 CPNAME CPACK}}
# HCACK B:1 (always) remote command acknowledge
# CPNAME A:n (varies) command parameter name
# CPACK B:1 (always) remote command parameter acknowledge, only received if error
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
HCACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCPNAME, lengthCPNAME) = pylist3[0].split(':')
CPNAME = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "B:1":
ok = False
break
CPACK = sp.binToInt(pylist3[1])
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F43R | Configure Spooling |
Sent by Host Only |
Comment: m=0 turns off all streams and fns, n=0 turns on all functions in the stream, stream 1 is not spooled
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F43R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 43, secs_receive_S2F43R)
def secs_receive_S2F43R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F43R.'''
ok = True
while ok: # break out of loop on error
# expect L:m {L:2 STRID {L:n FCNID}}
# STRID U1:1 (always) stream value
# FCNID U1:1 (always) message type function value
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for m in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[m])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
STRID = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
FCNID = int(pylist3[1])
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 44, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F43R
| S2F44 | Configure Spooling Acknowledge |
Sent by Equipment Only |
Comment: m=0 when there are no errors; n is the number of functions in error in a stream
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F44 Python Parse reply
rcr = sp.sendSecsMsg(2, 43, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RSPACK {L:m {L:3 STRID STRACK {L:n FCNID}}}
# RSPACK B:1 (always) spooling response
# STRID U1:1 (always) stream value
# STRACK B:1 (always) spooling stream acknowledge
# FCNID U1:1 (always) message type function value
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
RSPACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
STRID = int(pylist3[1])
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "B:1":
ok = False
break
STRACK = sp.binToInt(pylist3[1])
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1:
ok = False
break
for n in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[n])
if len(pylist4) < 1 or pylist4[0] != "U1:1":
ok = False
break
FCNID = int(pylist4[1])
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F45R | Define Variable Limit Attributes |
Sent by Host Only |
Comment: L:2* can be L:2 or L:0
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F45R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 45, secs_receive_S2F45R)
def secs_receive_S2F45R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F45R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 DATAID {L:m {L:2 VID {L:n {L:2 LIMITID {L:2* UPPERDB LOWERDB}}}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# VID A:n (varies) A variable ID
# LIMITID B:1 (always) identifies a specific limit
# UPPERDB F4:1 (varies) the upper bound of a deadband limit
# LOWERDB F4:1 (varies) the lower bound of a deadband limit
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist3[0].split(':')
VID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for n in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[n])
if len(pylist4) != 3 or pylist4[0] != "L:2":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1 or pylist5[0] != "B:1":
ok = False
break
LIMITID = sp.binToInt(pylist5[1])
pylist5 = lsplit(pylist4[2])
if len(pylist5) == 3: # 2 optional items found
pylist6 = lsplit(pylist5[1])
if len(pylist6) < 1:
ok = False
break
#(typeUPPERDB, lengthUPPERDB) = pylist6[0].split(':')
UPPERDB = (pylist6[1] if len(pylist6) == 2 else None)
pylist6 = lsplit(pylist5[2])
if len(pylist6) < 1:
ok = False
break
#(typeLOWERDB, lengthLOWERDB) = pylist6[0].split(':')
LOWERDB = (pylist6[1] if len(pylist6) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 46, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F45R
| S2F46 | Define Variable Limit Attributes Acknowledge |
Sent by Equipment Only |
Comment: L:2* can be L:2 or L:0, varies with VID
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F46 Python Parse reply
rcr = sp.sendSecsMsg(2, 45, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 VLAACK {L:m {L:3 VID LVACK {L:2* LIMITID LIMITACK}}}
# VLAACK B:1 (always) variable limit attribute acknowledge
# VID A:n (varies) A variable ID
# LVACK B:1 (always) variable limit error code
# LIMITID B:1 (always) identifies a specific limit
# LIMITACK B:1 (always) variable limit value error code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
VLAACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist3[0].split(':')
VID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "B:1":
ok = False
break
LVACK = sp.binToInt(pylist3[1])
pylist3 = lsplit(pylist2[3])
if len(pylist3) == 3: # 2 optional items found
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1 or pylist4[0] != "B:1":
ok = False
break
LIMITID = sp.binToInt(pylist4[1])
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or pylist4[0] != "B:1":
ok = False
break
LIMITACK = sp.binToInt(pylist4[1])
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F47R | Variable Limit Attribute Request |
Sent by Host Only |
Comment: Host sends L:0 to discover VIDs that support limits
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F47R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 47, secs_receive_S2F47R)
def secs_receive_S2F47R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F47R.'''
ok = True
while ok: # break out of loop on error
# expect L:m VID
# VID A:n (varies) A variable ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for m in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[m])
if len(pylist1) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist1[0].split(':')
VID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 48, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F47R
| S2F48 | Variable Limit Attribute Send |
Sent by Equipment Only |
Comment: L:4* can be L:4 or L:0
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F48 Python Parse reply
rcr = sp.sendSecsMsg(2, 47, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:m {L:2 VID {L:4* UNITS LIMITMIN LIMITMAX {L:n {L:3 LIMITID UPPERDB LOWERDB}}}}
# VID A:n (varies) A variable ID
# UNITS A:n (always) units identifier (see E5 Section 9)
# LIMITMIN F4:1 (varies) The minimum value allowed for the lower dead band limit
# LIMITMAX F4:1 (varies) The maximum value allowed for the upper dead band limit
# LIMITID B:1 (always) identifies a specific limit
# UPPERDB F4:1 (varies) the upper bound of a deadband limit
# LOWERDB F4:1 (varies) the lower bound of a deadband limit
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for m in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[m])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist2[0].split(':')
VID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) == 5: # 4 optional items found
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
UNITS = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeLIMITMIN, lengthLIMITMIN) = pylist3[0].split(':')
LIMITMIN = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1:
ok = False
break
#(typeLIMITMAX, lengthLIMITMAX) = pylist3[0].split(':')
LIMITMAX = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1:
ok = False
break
for n in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[n])
if len(pylist4) != 4 or pylist4[0] != "L:3":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1 or pylist5[0] != "B:1":
ok = False
break
LIMITID = sp.binToInt(pylist5[1])
pylist5 = lsplit(pylist4[2])
if len(pylist5) < 1:
ok = False
break
#(typeUPPERDB, lengthUPPERDB) = pylist5[0].split(':')
UPPERDB = (pylist5[1] if len(pylist5) == 2 else None)
pylist5 = lsplit(pylist4[3])
if len(pylist5) < 1:
ok = False
break
#(typeLOWERDB, lengthLOWERDB) = pylist5[0].split(':')
LOWERDB = (pylist5[1] if len(pylist5) == 2 else None)
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F49R | Enhanced Remote Command |
Sent by Host Only |
Comment: the standard fails to show the message is sent with reply requested; CEPVAL can be a list of same format values or CPNAME CEPVAL pairs, possible nested list inclusion is implied
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F49R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 49, secs_receive_S2F49R)
def secs_receive_S2F49R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F49R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 DATAID OBJSPEC RCMD {L:m {L:2 CPNAME CEPVAL}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# RCMD A:n (varies) remote command, GEM requires a maximum length of 20 printable characters, taken from hex 21-7E (no spaces)
# CPNAME A:n (varies) command parameter name
# CEPVAL A:n (varies) an enhanced parameter value, may be a scalar of any type, a list of values of the same type, or a list of possibly nested {L:2 CPNAME CEPVAL}
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeRCMD, lengthRCMD) = pylist1[0].split(':')
RCMD = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCPNAME, lengthCPNAME) = pylist3[0].split(':')
CPNAME = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeCEPVAL, lengthCEPVAL) = pylist3[0].split(':')
CEPVAL = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 50, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F49R
| S2F50 | Enhanced Remote Command Acknowledge |
Sent by Equipment Only |
Comment: CEPACK can be a list structure with possible nesting of additional list structures
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F50 Python Parse reply
rcr = sp.sendSecsMsg(2, 49, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 HCACK {L:n {L:2 CPNAME CEPACK}}
# HCACK B:1 (always) remote command acknowledge
# CPNAME A:n (varies) command parameter name
# CEPACK B:1 (always) command enhanced parameter acknowledge, may be a list or nested list structure to mirror the input structure of a CEPVAL
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
HCACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCPNAME, lengthCPNAME) = pylist3[0].split(':')
CPNAME = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "B:1":
ok = False
break
CEPACK = sp.binToInt(pylist3[1])
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F51R | Request Report Identifiers |
Sent by Host Only |
Comment: Host sends S2F51R to discover defined RPTIDs, new 8/2021
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F51R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 51, secs_receive_S2F51R)
def secs_receive_S2F51R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F51R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 52, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F51R
| S2F52 | Return Report Identifiers |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F52 Python Parse reply
rcr = sp.sendSecsMsg(2, 51, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n RPTID
# RPTID U4:1 (varies) report ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist1[0].split(':')
RPTID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F53R | Request Report Definitions |
Sent by Host Only |
Comment: Host sends L:0 for all defined reports, new 8/2021
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F53R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 53, secs_receive_S2F53R)
def secs_receive_S2F53R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F53R.'''
ok = True
while ok: # break out of loop on error
# expect L:n RPTID
# RPTID U4:1 (varies) report ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist1[0].split(':')
RPTID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 54, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F53R
| S2F54 | Return Report Definitions |
Sent by Equipment Only |
Comment: a is 0 for unknown RPTID, n is 0 for no reports defined and L:0 request, new 8/2021
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F54 Python Parse reply
rcr = sp.sendSecsMsg(2, 53, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:2 RPTID {L:a VID}}
# RPTID U4:1 (varies) report ID
# VID A:n (varies) A variable ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist2[0].split(':')
RPTID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for a in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[a])
if len(pylist3) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist3[0].split(':')
VID = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F55R | Request Event Report Links |
Sent by Host Only |
Comment: Host sends L:0 to discover linked events and links, new 8/2021
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F55R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 55, secs_receive_S2F55R)
def secs_receive_S2F55R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F55R.'''
ok = True
while ok: # break out of loop on error
# expect L:n CEID
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 56, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F55R
| S2F56 | Return Event Report Links |
Sent by Equipment Only |
Comment: CENAME is A:0 for unknown CEID, a is 0 for no linked reports, L:0 reply to L:0 if no links defined, new 8/2021
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F56 Python Parse reply
rcr = sp.sendSecsMsg(2, 55, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:3 CEID CENAME {L:a RPTID}}
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# CENAME A:n (always) a descriptive name for a Data Collection Event
# RPTID U4:1 (varies) report ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 4 or pylist1[0] != "L:3":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist2[0].split(':')
CEID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
CENAME = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1:
ok = False
break
for a in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[a])
if len(pylist3) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist3[0].split(':')
RPTID = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F57R | Request Enabled Events |
Sent by Host Only |
Comment: Host sends header-only to discover events that are enabled for reporting, new 8/2021
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F57R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 57, secs_receive_S2F57R)
def secs_receive_S2F57R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F57R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 58, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F57R
| S2F58 | Return Enabled Events |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F58 Python Parse reply
rcr = sp.sendSecsMsg(2, 57, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n CEID
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F59R | Request Spool Streams and Functions |
Sent by Host Only |
Comment: Host sends header-only to discover SFs configured for spooling, new 8/2021
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F59R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 59, secs_receive_S2F59R)
def secs_receive_S2F59R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F59R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 60, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F59R
| S2F60 | Return Spool Streams and Functions |
Sent by Equipment Only |
Comment: n=0 indicates spooling disabled, b=0 implies all Fs in stream, new 8/2021
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F60 Python Parse reply
rcr = sp.sendSecsMsg(2, 59, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:2 STRID {L:a FCNID}}
# STRID U1:1 (always) stream value
# FCNID U1:1 (always) message type function value
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
STRID = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for a in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[a])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
FCNID = int(pylist3[1])
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F61R | Request Trace Identifiers |
Sent by Host Only |
Comment: Host sends header-only to discover S2F23 trace reports, new 8/2021
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F61R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 61, secs_receive_S2F61R)
def secs_receive_S2F61R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F61R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 62, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F61R
| S2F62 | Return Trace Identifiers |
Sent by Equipment Only |
Comment: Host configures traces with S2F23, new message 8/2021
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F62 Python Parse reply
rcr = sp.sendSecsMsg(2, 61, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n TRID
# TRID A:n (varies) trace request ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist1[0].split(':')
TRID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S2F63R | Request Trace Definitions |
Sent by Host Only |
Comment: Host sends L:0 for all traces setup with S2F23, new 8/2021
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F63R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 2, 63, secs_receive_S2F63R)
def secs_receive_S2F63R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S2F63R.'''
ok = True
while ok: # break out of loop on error
# expect L:n TRID
# TRID A:n (varies) trace request ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist1[0].split(':')
TRID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 2, 64, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S2F63R
| S2F64 | Return Trace Definitions |
Sent by Equipment Only |
Comment: zero-length items sent for unknown TRID, n=0 for no traces defined and L:0 query, new 8/2021
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S2F64 Python Parse reply
rcr = sp.sendSecsMsg(2, 63, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:5 TRID DSPER TOTSMP REPGSZ {L:a SVID}}
# TRID A:n (varies) trace request ID
# DSPER A:6 (varies) data sample period, hhmmss is always supported, A:8 hhmmsscc may be supported
# TOTSMP U4:1 (varies) total samples to be made, should be an even multiple of REPGSZ
# REPGSZ U4:1 (varies) reporting group size, TOTSMP modulo REPGSZ should be 0
# SVID U4:1 (varies) status variable ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 6 or pylist1[0] != "L:5":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist2[0].split(':')
TRID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
#(typeDSPER, lengthDSPER) = pylist2[0].split(':')
DSPER = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1:
ok = False
break
#(typeTOTSMP, lengthTOTSMP) = pylist2[0].split(':')
TOTSMP = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[4])
if len(pylist2) < 1:
ok = False
break
#(typeREPGSZ, lengthREPGSZ) = pylist2[0].split(':')
REPGSZ = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[5])
if len(pylist2) < 1:
ok = False
break
for a in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[a])
if len(pylist3) < 1:
ok = False
break
#(typeSVID, lengthSVID) = pylist3[0].split(':')
SVID = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S3F1R | Material Status Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 1, secs_receive_S3F1R)
def secs_receive_S3F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F1R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S3F1R
| S3F2 | Material Status Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F2 Python Parse reply
rcr = sp.sendSecsMsg(3, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 MF {L:m {L:3 LOC QUA MID}}
# MF B:1 (varies) material format code, ASCII indicates generic units, E40 restricts to B:1
# LOC B:1 (always) material location code
# QUA B:1 (always) quantity (format limits max to 255!)
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMF, lengthMF) = pylist1[0].split(':')
MF = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or pylist3[0] != "B:1":
ok = False
break
LOC = sp.binToInt(pylist3[1])
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "B:1":
ok = False
break
QUA = sp.binToInt(pylist3[1])
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist3[0].split(':')
MID = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S3F3R | Time to Completion Data |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 3, secs_receive_S3F3R)
def secs_receive_S3F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F3R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S3F3R
| S3F4 | Time to Completion Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F4 Python Parse reply
rcr = sp.sendSecsMsg(3, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 MF {L:m {L:3 TTC QUA MID}}
# MF B:1 (varies) material format code, ASCII indicates generic units, E40 restricts to B:1
# TTC U4:1 (varies) time to completion, standard does not specify units, in seconds??
# QUA B:1 (always) quantity (format limits max to 255!)
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMF, lengthMF) = pylist1[0].split(':')
MF = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeTTC, lengthTTC) = pylist3[0].split(':')
TTC = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "B:1":
ok = False
break
QUA = sp.binToInt(pylist3[1])
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist3[0].split(':')
MID = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S3F5[R] | Material Found Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F5 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 5, secs_receive_S3F5)
def secs_receive_S3F5(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F5.'''
ok = True
while ok: # break out of loop on error
# expect L:2 MF QUA
# MF B:1 (varies) material format code, ASCII indicates generic units, E40 restricts to B:1
# QUA B:1 (always) quantity (format limits max to 255!)
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMF, lengthMF) = pylist1[0].split(':')
MF = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
QUA = sp.binToInt(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S3F5
| S3F6 | Material Found Acknowledge |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F6 Python Parse reply
rcr = sp.sendSecsMsg(3, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC3
# ACKC3 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC3 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S3F7[R] | Material Lost Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F7 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 7, secs_receive_S3F7)
def secs_receive_S3F7(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F7.'''
ok = True
while ok: # break out of loop on error
# expect L:3 MF QUA MID
# MF B:1 (varies) material format code, ASCII indicates generic units, E40 restricts to B:1
# QUA B:1 (always) quantity (format limits max to 255!)
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMF, lengthMF) = pylist1[0].split(':')
MF = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
QUA = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S3F7
| S3F8 | Material Lost Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F8 Python Parse reply
rcr = sp.sendSecsMsg(3, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC3
# ACKC3 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC3 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S3F9R | Matl ID Equate Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F9R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 9, secs_receive_S3F9R)
def secs_receive_S3F9R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F9R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 MID EMID
# MID A:16 (varies) material ID, E40 restricts to A:n
# EMID A:16 (varies) equivalent material ID
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeEMID, lengthEMID) = pylist1[0].split(':')
EMID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S3F9R
| S3F10 | Matl ID Equate Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F10 Python Parse reply
rcr = sp.sendSecsMsg(3, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC3
# ACKC3 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC3 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S3F11R | Matl ID Request |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F11R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 11, secs_receive_S3F11R)
def secs_receive_S3F11R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F11R.'''
ok = True
while ok: # break out of loop on error
# expect PTN
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist0[0].split(':')
PTN = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S3F11R
| S3F12 | Matl ID Request Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F12 Python Parse reply
rcr = sp.sendSecsMsg(3, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 PTN MIDRA MID
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# MIDRA B:1 (always) material ID Ack code
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
MIDRA = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S3F13R | Matl ID Send |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 13, secs_receive_S3F13R)
def secs_receive_S3F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PTN MID
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S3F13R
| S3F14 | Matl ID Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F14 Python Parse reply
rcr = sp.sendSecsMsg(3, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect MIDAC
# MIDAC B:1 (always) material ID ack
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
MIDAC = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S3F15R | SECS-I Matls Multi-block Inquire, not required for HSMS |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 15, secs_receive_S3F15R)
def secs_receive_S3F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F15R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 DATAID DATALENGTH
# DATAID U4:1 (varies) an identifier to correlate related messages
# DATALENGTH U4:1 (varies) total bytes of the message body
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeDATALENGTH, lengthDATALENGTH) = pylist1[0].split(':')
DATALENGTH = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S3F15R
| S3F16 | Matls Multi-block Grant |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F16 Python Parse reply
rcr = sp.sendSecsMsg(3, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect GRANT
# GRANT B:1 (always) multiblock grant code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
GRANT = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S3F17R | Carrier Action Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 17, secs_receive_S3F17R)
def secs_receive_S3F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F17R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 DATAID CARRIERACTION CARRIERID PTN {L:n {L:2 CATTRID CATTRDATA}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# CARRIERACTION A:n (always) carrier action request
# CARRIERID A:n (always) carrier ID
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# CATTRID A:n (varies) carrier attribute identifier, E87 requires text per E39.1, Sec 6
# CATTRDATA A:n (varies) carrier attribute value (any data type)
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
CARRIERACTION = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
CARRIERID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCATTRID, lengthCATTRID) = pylist3[0].split(':')
CATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeCATTRDATA, lengthCATTRDATA) = pylist3[0].split(':')
CATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S3F17R
| S3F18 | Carrier Action Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F18 Python Parse reply
rcr = sp.sendSecsMsg(3, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 CAACK {L:n {L:2 ERRCODE ERRTEXT}}
# CAACK U1:1 (always) carrier action acknowledge
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
CAACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S3F19R | Cancel All Carrier Out Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F19R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 19, secs_receive_S3F19R)
def secs_receive_S3F19R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F19R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S3F19R
| S3F20 | Cancel All Carrier Out Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F20 Python Parse reply
rcr = sp.sendSecsMsg(3, 19, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 CAACK {L:n {L:2 ERRCODE ERRTEXT}}
# CAACK U1:1 (always) carrier action acknowledge
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
CAACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S3F21R | Port Group Defn |
Sent by Host Only |
Comment: E87 used to refer to PORTACCESS but E5 defines ACCESSMODE
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F21R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 21, secs_receive_S3F21R)
def secs_receive_S3F21R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F21R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 PORTGRPNAME ACCESSMODE {L:n PTN}
# PORTGRPNAME A:n (always) name of a group of ports
# ACCESSMODE U1:1 (always) load port access mode
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PORTGRPNAME = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
ACCESSMODE = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist2[0].split(':')
PTN = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 22, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S3F21R
| S3F22 | Port Group Defn Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F22 Python Parse reply
rcr = sp.sendSecsMsg(3, 21, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 CAACK {L:n {L:2 ERRCODE ERRTEXT}}
# CAACK U1:1 (always) carrier action acknowledge
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
CAACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S3F23R | Port Group Action Req |
Sent by Host Only |
Comment: not documented in E87, port group names - is this vendor specific?
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F23R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 23, secs_receive_S3F23R)
def secs_receive_S3F23R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F23R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 PGRPACTION PORTGRPNAME {L:m {L:2 PARAMNAME PARAMVAL}}
# PGRPACTION A:n (always) port group command, an alias for PORTACTION?
# PORTGRPNAME A:n (always) name of a group of ports
# PARAMNAME A:n (always) argument name
# PARAMVAL U1:1 (varies) argument value, only defined use is ServiceStatus, 0 = OUT OF SERVICE, 1 = IN SERVICE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PGRPACTION = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PORTGRPNAME = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
PARAMNAME = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typePARAMVAL, lengthPARAMVAL) = pylist3[0].split(':')
PARAMVAL = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 24, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S3F23R
| S3F24 | Port Group Action Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F24 Python Parse reply
rcr = sp.sendSecsMsg(3, 23, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 CAACK {L:n {L:2 ERRCODE ERRTEXT}}
# CAACK U1:1 (always) carrier action acknowledge
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
CAACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S3F25R | Port Action Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F25R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 25, secs_receive_S3F25R)
def secs_receive_S3F25R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F25R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 PORTACTION PTN {L:m {L:2 PARAMNAME PARAMVAL}}
# PORTACTION A:n (always) ChangeServiceStatus, CancelReservationAtPort or ReserveAtPort
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# PARAMNAME A:n (always) argument name
# PARAMVAL U1:1 (varies) argument value, only defined use is ServiceStatus, 0 = OUT OF SERVICE, 1 = IN SERVICE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PORTACTION = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
PARAMNAME = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typePARAMVAL, lengthPARAMVAL) = pylist3[0].split(':')
PARAMVAL = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 26, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S3F25R
| S3F26 | Port Action Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F26 Python Parse reply
rcr = sp.sendSecsMsg(3, 25, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 CAACK {L:n {L:2 ERRCODE ERRTEXT}}
# CAACK U1:1 (always) carrier action acknowledge
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
CAACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S3F27R | Change Access |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F27R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 27, secs_receive_S3F27R)
def secs_receive_S3F27R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F27R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 ACCESSMODE {L:n PTN}
# ACCESSMODE U1:1 (always) load port access mode
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
ACCESSMODE = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist2[0].split(':')
PTN = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 28, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S3F27R
| S3F28 | Change Access Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F28 Python Parse reply
rcr = sp.sendSecsMsg(3, 27, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 CAACK {L:n {L:3 PTN ERRCODE ERRTEXT}}
# CAACK U1:1 (always) carrier action acknowledge
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
CAACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist3[0].split(':')
PTN = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S3F29R | Carrier Tag Read Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F29R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 29, secs_receive_S3F29R)
def secs_receive_S3F29R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F29R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 LOCID CARRIERSPEC DATASEG DATALENGTH
# LOCID A:n (varies) logical ID of carrier location, E87 requires text
# CARRIERSPEC A:n (always) carrier object specifier (OBJSPEC)
# DATASEG A:n (varies) identifies data requested, E87 requires text
# DATALENGTH U4:1 (varies) total bytes of the message body
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeLOCID, lengthLOCID) = pylist1[0].split(':')
LOCID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
CARRIERSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeDATASEG, lengthDATASEG) = pylist1[0].split(':')
DATASEG = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeDATALENGTH, lengthDATALENGTH) = pylist1[0].split(':')
DATALENGTH = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 30, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S3F29R
| S3F30 | Carrier Tag Read Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F30 Python Parse reply
rcr = sp.sendSecsMsg(3, 29, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 DATA {L:2 CAACK {L:s {L:2 ERRCODE ERRTEXT}}}
# DATA A:n (varies) unformatted data
# CAACK U1:1 (always) carrier action acknowledge
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATA, lengthDATA) = pylist1[0].split(':')
DATA = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
CAACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for s in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[s])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S3F31R | Carrier Tag Write Data |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F31R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 31, secs_receive_S3F31R)
def secs_receive_S3F31R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F31R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 LOCID CARRIERSPEC DATASEG DATALENGTH DATA
# LOCID A:n (varies) logical ID of carrier location, E87 requires text
# CARRIERSPEC A:n (always) carrier object specifier (OBJSPEC)
# DATASEG A:n (varies) identifies data requested, E87 requires text
# DATALENGTH U4:1 (varies) total bytes of the message body
# DATA A:n (varies) unformatted data
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeLOCID, lengthLOCID) = pylist1[0].split(':')
LOCID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
CARRIERSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeDATASEG, lengthDATASEG) = pylist1[0].split(':')
DATASEG = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeDATALENGTH, lengthDATALENGTH) = pylist1[0].split(':')
DATALENGTH = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
#(typeDATA, lengthDATA) = pylist1[0].split(':')
DATA = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 32, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S3F31R
| S3F32 | Carrier Tag Write Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F32 Python Parse reply
rcr = sp.sendSecsMsg(3, 31, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 CAACK {L:s {L:2 ERRCODE ERRTEXT}}
# CAACK U1:1 (always) carrier action acknowledge
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
CAACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for s in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[s])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S3F33 | Cancel All Pod Out Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F33 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 33, secs_receive_S3F33)
def secs_receive_S3F33(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F33.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 34, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S3F33
| S3F34 | Cancel All Pod Out Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F34 Python Parse reply
rcr = sp.sendSecsMsg(3, 33, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 CAACK {L:n {L:2 ERRCODE ERRTEXT}}
# CAACK U1:1 (always) carrier action acknowledge
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
CAACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S3F35 | Reticle Transfer Job Req |
Sent by Host and Equipment |
Comment: earlier standard descriptions have errors and undefined data items
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F35 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 3, 35, secs_receive_S3F35)
def secs_receive_S3F35(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S3F35.'''
ok = True
while ok: # break out of loop on error
# expect L:7 JOBACTION PODID INPTN OUTPTN {L:n {L:2 ATTRID ATTRDATA}} {L:m {L:3 RETICLEID RETREMOVEINSTR {L:r {L:2 ATTRID ATTRDATA}}}} {L:k {L:2 RETICLEID2 RETPLACEINSTR}}
# JOBACTION A:n (always) reticle transfer command
# PODID A:n (always) OBJSPEC for a Pod instance
# INPTN B:1 (always) input material port number
# OUTPTN B:1 (varies) output port (PTN)
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
# RETICLEID A:n (always) OBJSPEC value for a reticle
# RETREMOVEINSTR U1:1 (always) pod slot reticle remove instruction
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
# RETICLEID2 A:n (always) OBJSPEC value for a second reticle
# RETPLACEINSTR U1:1 (always) pod slot reticle place instruction
pylist0 = lsplit(TSN_data)
if len(pylist0) != 8 or pylist0[0] != "L:7":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
JOBACTION = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PODID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
INPTN = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeOUTPTN, lengthOUTPTN) = pylist1[0].split(':')
OUTPTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RETICLEID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
RETREMOVEINSTR = int(pylist3[1])
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1:
ok = False
break
for r in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[r])
if len(pylist4) != 3 or pylist4[0] != "L:2":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist5[0].split(':')
ATTRID = (pylist5[1] if len(pylist5) == 2 else None)
pylist5 = lsplit(pylist4[2])
if len(pylist5) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist5[0].split(':')
ATTRDATA = (pylist5[1] if len(pylist5) == 2 else None)
if not ok: break
if not ok: break
pylist1 = lsplit(pylist0[7])
if len(pylist1) < 1:
ok = False
break
for k in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[k])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RETICLEID2 = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
RETPLACEINSTR = int(pylist3[1])
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 3, 36, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S3F35
| S3F36 | Reticle Transfer Job Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S3F36 Python Parse reply
rcr = sp.sendSecsMsg(3, 35, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RPMACK {L:n {L:2 ERRCODE ERRTEXT}}
# RPMACK U1:1 (always) reticle pod management ack code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RPMACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S4F1R | Ready to Send Materials |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 1, secs_receive_S4F1R)
def secs_receive_S4F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F1R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PTN MID
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F1R
| S4F2 | Ready to Send Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F2 Python Parse reply
rcr = sp.sendSecsMsg(4, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect RSACK
# RSACK B:1 (always) ready to send acknowledge
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
RSACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S4F3 | Send Material |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F3 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 3, secs_receive_S4F3)
def secs_receive_S4F3(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F3.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PTN MID
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F3
| S4F5 | Handshake Complete |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F5 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 5, secs_receive_S4F5)
def secs_receive_S4F5(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F5.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PTN MID
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F5
| S4F7 | Not Ready to Send |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F7 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 7, secs_receive_S4F7)
def secs_receive_S4F7(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F7.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PTN MID
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F7
| S4F9 | Stuck in Sender |
Sent by Host and Equipment |
Comment: standard does not show as bidirectional
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F9 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 9, secs_receive_S4F9)
def secs_receive_S4F9(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F9.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PTN MID
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F9
| S4F11 | Stuck in Receiver |
Sent by Host and Equipment |
Comment: standard does not show as bidirectional
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F11 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 11, secs_receive_S4F11)
def secs_receive_S4F11(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F11.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PTN MID
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F11
| S4F13 | Send Incomplete Timeout |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F13 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 13, secs_receive_S4F13)
def secs_receive_S4F13(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F13.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PTN MID
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F13
| S4F15 | Material Received |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F15 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 15, secs_receive_S4F15)
def secs_receive_S4F15(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F15.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PTN MID
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F15
| S4F17R | Request to Receive |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 17, secs_receive_S4F17R)
def secs_receive_S4F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F17R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PTN MID
# PTN U1:1 (varies) material port number, E87 shows type U1:1 with data 1-255
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePTN, lengthPTN) = pylist1[0].split(':')
PTN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F17R
| S4F18 | Request to Receive Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F18 Python Parse reply
rcr = sp.sendSecsMsg(4, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect RRACK
# RRACK B:1 (always) request to receive acknowledge
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
RRACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S4F19R | Transfer Job Create |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F19R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 19, secs_receive_S4F19R)
def secs_receive_S4F19R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F19R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 DATAID {L:2 TRJOBNAME {L:n {L:12 TRLINK TRPORT TROBJNAME TROBJTYPE TRROLE TRRCP TRPTNR TRPTPORT TRDIR TRTYPE TRLOCATION TRAUTOSTART}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# TRJOBNAME A:80 (always) host assigned id for transfer job
# TRLINK U4:1 (varies) task identifier correlation value
# TRPORT U4:1 (varies) port identifier
# TROBJNAME A:n (varies) identifies material to be transferred
# TROBJTYPE U4:1 (varies) identifies type of object to be transferred
# TRROLE U1:1 (always) indicates equipment transfer role
# TRRCP A:80 (always) name of transfer recipe for this handoff
# TRPTNR A:n (always) EQNAME of transfer partner equipment
# TRPTPORT U4:1 (varies) transfer partner port
# TRDIR U1:1 (always) transfer direction
# TRTYPE U1:1 (always) equipment is active or passive transfer participant
# TRLOCATION U4:1 (varies) material transfer location
# TRAUTOSTART TF:1 (always) if true material transfer is initiated by the primary when ready
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
TRJOBNAME = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) != 13 or pylist3[0] != "L:12":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeTRLINK, lengthTRLINK) = pylist4[0].split(':')
TRLINK = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1:
ok = False
break
#(typeTRPORT, lengthTRPORT) = pylist4[0].split(':')
TRPORT = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[3])
if len(pylist4) < 1:
ok = False
break
#(typeTROBJNAME, lengthTROBJNAME) = pylist4[0].split(':')
TROBJNAME = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[4])
if len(pylist4) < 1:
ok = False
break
#(typeTROBJTYPE, lengthTROBJTYPE) = pylist4[0].split(':')
TROBJTYPE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[5])
if len(pylist4) < 1 or pylist4[0] != "U1:1":
ok = False
break
TRROLE = int(pylist4[1])
pylist4 = lsplit(pylist3[6])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
TRRCP = (pylist4[1] if len(pylist4) == 2 else "")
pylist4 = lsplit(pylist3[7])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
TRPTNR = (pylist4[1] if len(pylist4) == 2 else "")
pylist4 = lsplit(pylist3[8])
if len(pylist4) < 1:
ok = False
break
#(typeTRPTPORT, lengthTRPTPORT) = pylist4[0].split(':')
TRPTPORT = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[9])
if len(pylist4) < 1 or pylist4[0] != "U1:1":
ok = False
break
TRDIR = int(pylist4[1])
pylist4 = lsplit(pylist3[10])
if len(pylist4) < 1 or pylist4[0] != "U1:1":
ok = False
break
TRTYPE = int(pylist4[1])
pylist4 = lsplit(pylist3[11])
if len(pylist4) < 1:
ok = False
break
#(typeTRLOCATION, lengthTRLOCATION) = pylist4[0].split(':')
TRLOCATION = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[12])
if len(pylist4) < 1 or pylist4[0] != "TF:1":
ok = False
break
TRAUTOSTART = int(pylist4[1])
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S4F19R
| S4F20 | Transfer Job Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F20 Python Parse reply
rcr = sp.sendSecsMsg(4, 19, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 TRJOBID {L:m TRATOMCID} {L:2 TRACK {L:n {L:2 ERRCODE ERRTEXT}}}
# TRJOBID B:1 (always) assigned identifier for transfer job
# TRATOMCID U4:1 (varies) assigned identifier for atomic transfer
# TRACK TF:1 (always) transfer activity success flag
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
TRJOBID = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) < 1:
ok = False
break
#(typeTRATOMCID, lengthTRATOMCID) = pylist2[0].split(':')
TRATOMCID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[3])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
TRACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S4F21R | Transfer Job Command |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F21R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 21, secs_receive_S4F21R)
def secs_receive_S4F21R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F21R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 TRJOBID TRCMDNAME {L:n {L:2 CPNAME CPVAL}}
# TRJOBID B:1 (always) assigned identifier for transfer job
# TRCMDNAME A:n (always) text enum, CANCEL, PAUSE, RESUME, ABORT, STOP, STARTHANDOFF
# CPNAME A:n (varies) command parameter name
# CPVAL A:n (varies) command parameter value, any scalar type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
TRJOBID = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TRCMDNAME = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCPNAME, lengthCPNAME) = pylist3[0].split(':')
CPNAME = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeCPVAL, lengthCPVAL) = pylist3[0].split(':')
CPVAL = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 22, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S4F21R
| S4F22 | Transfer Job Command Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F22 Python Parse reply
rcr = sp.sendSecsMsg(4, 21, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 TRACK {L:n {L:2 ERRCODE ERRTEXT}}
# TRACK TF:1 (always) transfer activity success flag
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
TRACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S4F23[R] | Transfer Command Alert |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F23 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 23, secs_receive_S4F23)
def secs_receive_S4F23(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F23.'''
ok = True
while ok: # break out of loop on error
# expect L:4 TRJOBID TRJOBNAME TRJOBMS {L:2 TRACK {L:n {L:2 ERRCODE ERRTEXT}}}
# TRJOBID B:1 (always) assigned identifier for transfer job
# TRJOBNAME A:80 (always) host assigned id for transfer job
# TRJOBMS U1:1 (always) transfer job milestone
# TRACK TF:1 (always) transfer activity success flag
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
TRJOBID = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TRJOBNAME = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
TRJOBMS = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
TRACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 24, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F23
| S4F24 | Transfer Alert Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F24 Python Parse reply
rcr = sp.sendSecsMsg(4, 23, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# no data expected
return # finished ok
# end while(ok)
# end def
| S4F25R | Multi-block Inquire |
Sent by Host Only |
Comment: for SECS-I, not required for HSMS
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F25R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 25, secs_receive_S4F25R)
def secs_receive_S4F25R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F25R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 DATAID DATALENGTH
# DATAID U4:1 (varies) an identifier to correlate related messages
# DATALENGTH U4:1 (varies) total bytes of the message body
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeDATALENGTH, lengthDATALENGTH) = pylist1[0].split(':')
DATALENGTH = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 26, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S4F25R
| S4F26 | Multi-block Grant |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F26 Python Parse reply
rcr = sp.sendSecsMsg(4, 25, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect GRANT
# GRANT B:1 (always) multiblock grant code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
GRANT = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S4F27 | Handoff Ready |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F27 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 27, secs_receive_S4F27)
def secs_receive_S4F27(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F27.'''
ok = True
while ok: # break out of loop on error
# expect L:2 EQNAME {L:11 TRLINK TRPORT TROBJNAME TROBJTYPE TRROLE TRPTNR TRPTPORT TRDIR TRTYPE TRLOCATION}
# EQNAME A:80 (always) factory assigned equipment identifier
# TRLINK U4:1 (varies) task identifier correlation value
# TRPORT U4:1 (varies) port identifier
# TROBJNAME A:n (varies) identifies material to be transferred
# TROBJTYPE U4:1 (varies) identifies type of object to be transferred
# TRROLE U1:1 (always) indicates equipment transfer role
# TRPTNR A:n (always) EQNAME of transfer partner equipment
# TRPTPORT U4:1 (varies) transfer partner port
# TRDIR U1:1 (always) transfer direction
# TRTYPE U1:1 (always) equipment is active or passive transfer participant
# TRLOCATION U4:1 (varies) material transfer location
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EQNAME = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 12 or pylist1[0] != "L:11":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeTRLINK, lengthTRLINK) = pylist2[0].split(':')
TRLINK = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
#(typeTRPORT, lengthTRPORT) = pylist2[0].split(':')
TRPORT = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1:
ok = False
break
#(typeTROBJNAME, lengthTROBJNAME) = pylist2[0].split(':')
TROBJNAME = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[4])
if len(pylist2) < 1:
ok = False
break
#(typeTROBJTYPE, lengthTROBJTYPE) = pylist2[0].split(':')
TROBJTYPE = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[5])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
TRROLE = int(pylist2[1])
pylist2 = lsplit(pylist1[6])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
TRPTNR = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[7])
if len(pylist2) < 1:
ok = False
break
#(typeTRPTPORT, lengthTRPTPORT) = pylist2[0].split(':')
TRPTPORT = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[8])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
TRDIR = int(pylist2[1])
pylist2 = lsplit(pylist1[9])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
TRTYPE = int(pylist2[1])
pylist2 = lsplit(pylist1[10])
if len(pylist2) < 1:
ok = False
break
#(typeTRLOCATION, lengthTRLOCATION) = pylist2[0].split(':')
TRLOCATION = (pylist2[1] if len(pylist2) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 28, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F27
| S4F29 | Handoff Command |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F29 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 29, secs_receive_S4F29)
def secs_receive_S4F29(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F29.'''
ok = True
while ok: # break out of loop on error
# expect L:4 TRLINK MCINDEX HOCMDNAME {L:n {L:2 CPNAME CPVAL}}
# TRLINK U4:1 (varies) task identifier correlation value
# MCINDEX U4:1 (varies) correlation value for handoff command
# HOCMDNAME A:n (varies) handoff command identifier
# CPNAME A:n (varies) command parameter name
# CPVAL A:n (varies) command parameter value, any scalar type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeTRLINK, lengthTRLINK) = pylist1[0].split(':')
TRLINK = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMCINDEX, lengthMCINDEX) = pylist1[0].split(':')
MCINDEX = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeHOCMDNAME, lengthHOCMDNAME) = pylist1[0].split(':')
HOCMDNAME = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCPNAME, lengthCPNAME) = pylist3[0].split(':')
CPNAME = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeCPVAL, lengthCPVAL) = pylist3[0].split(':')
CPVAL = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 30, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F29
| S4F31 | Handoff Command Complete |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F31 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 31, secs_receive_S4F31)
def secs_receive_S4F31(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F31.'''
ok = True
while ok: # break out of loop on error
# expect L:3 TRLINK MCINDEX {L:2 HOACK {L:n {L:2 ERRCODE ERRTEXT}}}
# TRLINK U4:1 (varies) task identifier correlation value
# MCINDEX U4:1 (varies) correlation value for handoff command
# HOACK TF:1 (always) handoff success flag
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeTRLINK, lengthTRLINK) = pylist1[0].split(':')
TRLINK = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMCINDEX, lengthMCINDEX) = pylist1[0].split(':')
MCINDEX = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
HOACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 32, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F31
| S4F33 | Handoff Verified |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F33 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 33, secs_receive_S4F33)
def secs_receive_S4F33(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F33.'''
ok = True
while ok: # break out of loop on error
# expect L:2 TRLINK {L:2 HOACK {L:n ERRCODE ERRTEXT}}
# TRLINK U4:1 (varies) task identifier correlation value
# HOACK TF:1 (always) handoff success flag
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeTRLINK, lengthTRLINK) = pylist1[0].split(':')
TRLINK = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
HOACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[n])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 34, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F33
| S4F35 | Handoff Cancel Ready |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F35 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 35, secs_receive_S4F35)
def secs_receive_S4F35(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F35.'''
ok = True
while ok: # break out of loop on error
# expect TRLINK
# TRLINK U4:1 (varies) task identifier correlation value
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeTRLINK, lengthTRLINK) = pylist0[0].split(':')
TRLINK = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 36, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F35
| S4F37 | Handoff Cancel Ready Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F37 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 37, secs_receive_S4F37)
def secs_receive_S4F37(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F37.'''
ok = True
while ok: # break out of loop on error
# expect L:2 TRLINK HOCANCELACK
# TRLINK U4:1 (varies) task identifier correlation value
# HOCANCELACK U1:1 (always) hand off cancel ack
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeTRLINK, lengthTRLINK) = pylist1[0].split(':')
TRLINK = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
HOCANCELACK = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 38, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F37
| S4F39 | Handoff Halt |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F39 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 39, secs_receive_S4F39)
def secs_receive_S4F39(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F39.'''
ok = True
while ok: # break out of loop on error
# expect TRLINK
# TRLINK U4:1 (varies) task identifier correlation value
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeTRLINK, lengthTRLINK) = pylist0[0].split(':')
TRLINK = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 40, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F39
| S4F41 | Handoff Halt Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S4F41 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 4, 41, secs_receive_S4F41)
def secs_receive_S4F41(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S4F41.'''
ok = True
while ok: # break out of loop on error
# expect L:2 TRLINK HOHALTACK
# TRLINK U4:1 (varies) task identifier correlation value
# HOHALTACK U1:1 (always) hand off halt ack
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeTRLINK, lengthTRLINK) = pylist1[0].split(':')
TRLINK = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
HOHALTACK = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 4, 42, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S4F41
| S5F1[R] | Alarm Report Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F1 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 5, 1, secs_receive_S5F1)
def secs_receive_S5F1(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S5F1.'''
ok = True
while ok: # break out of loop on error
# expect L:3 ALCD ALID ALTX
# ALCD B:1 (always) alarm code byte, >= 128 alarm is set, bit field use is deprecated
# ALID U4:1 (varies) Alarm type ID
# ALTX A:120 (always) alarm text, the length limit was recently raised from 40
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ALCD = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeALID, lengthALID) = pylist1[0].split(':')
ALID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ALTX = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 5, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S5F1
| S5F2 | Alarm Report Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F2 Python Parse reply
rcr = sp.sendSecsMsg(5, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC5
# ACKC5 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC5 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S5F3[R] | Enable/Disable Alarm Send |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F3 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 5, 3, secs_receive_S5F3)
def secs_receive_S5F3(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S5F3.'''
ok = True
while ok: # break out of loop on error
# expect L:2 ALED ALID
# ALED B:1 (always) enable/disable alarm, 128 means enable, 0 disable
# ALID U4:1 (varies) Alarm type ID
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ALED = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeALID, lengthALID) = pylist1[0].split(':')
ALID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 5, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S5F3
| S5F4 | Enable/Disable Alarm Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F4 Python Parse reply
rcr = sp.sendSecsMsg(5, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC5
# ACKC5 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC5 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S5F5R | List Alarms Request |
Sent by Host Only |
Comment: Host sends zero length item for all, otherwise ALID vector
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 5, 5, secs_receive_S5F5R)
def secs_receive_S5F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S5F5R.'''
ok = True
while ok: # break out of loop on error
# expect ALIDVECTOR
# ALIDVECTOR (list)U4:n (varies) alarm ID vector
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeALIDVECTOR, lengthALIDVECTOR) = pylist0[0].split(':')
ALIDVECTOR = []
for i in range(0, len(ALIDVECTOR)):
ALIDVECTOR.append(int(pylist0[1+i])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 5, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S5F5R
| S5F6 | List Alarm Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F6 Python Parse reply
rcr = sp.sendSecsMsg(5, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:3 ALCD ALID ALTX}
# ALCD B:1 (always) alarm code byte, >= 128 alarm is set, bit field use is deprecated
# ALID U4:1 (varies) Alarm type ID
# ALTX A:120 (always) alarm text, the length limit was recently raised from 40
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 4 or pylist1[0] != "L:3":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "B:1":
ok = False
break
ALCD = sp.binToInt(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
#(typeALID, lengthALID) = pylist2[0].split(':')
ALID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
ALTX = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S5F7R | List Enabled Alarm Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F7R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 5, 7, secs_receive_S5F7R)
def secs_receive_S5F7R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S5F7R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 5, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S5F7R
| S5F8 | List Enabled Alarm Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F8 Python Parse reply
rcr = sp.sendSecsMsg(5, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:3 ALCD ALID ALTX}
# ALCD B:1 (always) alarm code byte, >= 128 alarm is set, bit field use is deprecated
# ALID U4:1 (varies) Alarm type ID
# ALTX A:120 (always) alarm text, the length limit was recently raised from 40
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 4 or pylist1[0] != "L:3":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "B:1":
ok = False
break
ALCD = sp.binToInt(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
#(typeALID, lengthALID) = pylist2[0].split(':')
ALID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
ALTX = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S5F9[R] | Exception Post Notify |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F9 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 5, 9, secs_receive_S5F9)
def secs_receive_S5F9(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S5F9.'''
ok = True
while ok: # break out of loop on error
# expect L:5 TIMESTAMP EXID EXTYPE EXMESSAGE {L:n EXRECVRA}
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# EXID A:20 (always) exception identifier
# EXTYPE A:5 (always) exception type, "ALARM" or "ERROR"
# EXMESSAGE A:n (always) exception description
# EXRECVRA A:40 (always) exception recovery action description
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EXID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EXTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EXMESSAGE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
EXRECVRA = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 5, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S5F9
| S5F10 | Exception Post Confirm |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F10 Python Parse reply
rcr = sp.sendSecsMsg(5, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# no data expected
return # finished ok
# end while(ok)
# end def
| S5F11[R] | Exception Clear Notify |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F11 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 5, 11, secs_receive_S5F11)
def secs_receive_S5F11(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S5F11.'''
ok = True
while ok: # break out of loop on error
# expect L:4 TIMESTAMP EXID EXTYPE EXMESSAGE
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# EXID A:20 (always) exception identifier
# EXTYPE A:5 (always) exception type, "ALARM" or "ERROR"
# EXMESSAGE A:n (always) exception description
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EXID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EXTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EXMESSAGE = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 5, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S5F11
| S5F12 | Exception Clear Confirm |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F12 Python Parse reply
rcr = sp.sendSecsMsg(5, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# no data expected
return # finished ok
# end while(ok)
# end def
| S5F13R | Exception Recover Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 5, 13, secs_receive_S5F13R)
def secs_receive_S5F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S5F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 EXID EXRECVRA
# EXID A:20 (always) exception identifier
# EXRECVRA A:40 (always) exception recovery action description
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EXID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EXRECVRA = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 5, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S5F13R
| S5F14 | Exception Recover Acknowledge |
Sent by Equipment Only |
Comment: L:2* can be L:2 or L:0
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F14 Python Parse reply
rcr = sp.sendSecsMsg(5, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 EXID {L:2 ACKA {L:2* ERRCODE ERRTEXT}}
# EXID A:20 (always) exception identifier
# ACKA TF:1 (always) request success
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EXID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
ACKA = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) == 3: # 2 optional items found
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
return # finished ok
# end while(ok)
# end def
| S5F15[R] | Exception Recovery Complete Notify |
Sent by Equipment Only |
Comment: L:2* can be L:2 or L:0; see E41
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F15 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 5, 15, secs_receive_S5F15)
def secs_receive_S5F15(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S5F15.'''
ok = True
while ok: # break out of loop on error
# expect L:3 TIMESTAMP EXID {L:2 ACKA {L:2* ERRCODE ERRTEXT}}
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# EXID A:20 (always) exception identifier
# ACKA TF:1 (always) request success
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EXID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
ACKA = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) == 3: # 2 optional items found
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 5, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S5F15
| S5F16 | Exception Recovery Complete Confirm |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F16 Python Parse reply
rcr = sp.sendSecsMsg(5, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# no data expected
return # finished ok
# end while(ok)
# end def
| S5F17R | Exception Recovery Abort Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 5, 17, secs_receive_S5F17R)
def secs_receive_S5F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S5F17R.'''
ok = True
while ok: # break out of loop on error
# expect EXID
# EXID A:20 (always) exception identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("A:"):
ok = False
break
EXID = (pylist0[1] if len(pylist0) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 5, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S5F17R
| S5F18 | Exception Recovery Abort Ack |
Sent by Equipment Only |
Comment: L:2* can be L:2 or L:0
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S5F18 Python Parse reply
rcr = sp.sendSecsMsg(5, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 EXID {L:2 ACKA {L:2* ERRCODE ERRTEXT}}
# EXID A:20 (always) exception identifier
# ACKA TF:1 (always) request success
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EXID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
ACKA = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) == 3: # 2 optional items found
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
return # finished ok
# end while(ok)
# end def
| S6F1[R] | Trace Data Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F1 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 1, secs_receive_S6F1)
def secs_receive_S6F1(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F1.'''
ok = True
while ok: # break out of loop on error
# expect L:4 TRID SMPLN STIME {L:n SV}
# TRID A:n (varies) trace request ID
# SMPLN U4:1 (varies) sample number
# STIME A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# SV A:n (varies) status variable value
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist1[0].split(':')
TRID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeSMPLN, lengthSMPLN) = pylist1[0].split(':')
SMPLN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
STIME = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeSV, lengthSV) = pylist2[0].split(':')
SV = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S6F1
| S6F2 | Trace Data Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F2 Python Parse reply
rcr = sp.sendSecsMsg(6, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC6
# ACKC6 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC6 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S6F3[R] | Discrete Variable Data Send |
Sent by Equipment Only |
Comment: Discrete implies event-based such as analysis completion. Use S2F15 to choose supported events.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F3 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 3, secs_receive_S6F3)
def secs_receive_S6F3(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F3.'''
ok = True
while ok: # break out of loop on error
# expect L:3 DATAID CEID {L:n {L:2 DSID {L:m {L:2 DVNAME DVVAL}}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# DSID A:n (varies) data set ID, akin to a report type
# DVNAME U4:1 (varies) data value name, generically a VID, therefore GEM requires Un type
# DVVAL A:n (varies) data value, any format including list
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeDSID, lengthDSID) = pylist3[0].split(':')
DSID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for m in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[m])
if len(pylist4) != 3 or pylist4[0] != "L:2":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1:
ok = False
break
#(typeDVNAME, lengthDVNAME) = pylist5[0].split(':')
DVNAME = (pylist5[1] if len(pylist5) == 2 else None)
pylist5 = lsplit(pylist4[2])
if len(pylist5) < 1:
ok = False
break
#(typeDVVAL, lengthDVVAL) = pylist5[0].split(':')
DVVAL = (pylist5[1] if len(pylist5) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S6F3
| S6F4 | Discrete Variable Data Send Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F4 Python Parse reply
rcr = sp.sendSecsMsg(6, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC6
# ACKC6 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC6 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S6F5R | Multi-block Data Send Inquire |
Sent by Equipment Only |
Comment: for SECS-I and S6F3 F9 F11 and F13, not required for HSMS
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 5, secs_receive_S6F5R)
def secs_receive_S6F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F5R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 DATAID DATALENGTH
# DATAID U4:1 (varies) an identifier to correlate related messages
# DATALENGTH U4:1 (varies) total bytes of the message body
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeDATALENGTH, lengthDATALENGTH) = pylist1[0].split(':')
DATALENGTH = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S6F5R
| S6F6 | Multi-block Grant |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F6 Python Parse reply
rcr = sp.sendSecsMsg(6, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect GRANT6
# GRANT6 B:1 (always) multblock permission grant
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
GRANT6 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S6F7R | Data Transfer Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F7R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 7, secs_receive_S6F7R)
def secs_receive_S6F7R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F7R.'''
ok = True
while ok: # break out of loop on error
# expect DATAID
# DATAID U4:1 (varies) an identifier to correlate related messages
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist0[0].split(':')
DATAID = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S6F7R
| S6F8 | Data Transfer Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F8 Python Parse reply
rcr = sp.sendSecsMsg(6, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 DATAID CEID {L:n DSID {L:m {L:2 DVNAME DVVAL}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# DSID A:n (varies) data set ID, akin to a report type
# DVNAME U4:1 (varies) data value name, generically a VID, therefore GEM requires Un type
# DVVAL A:n (varies) data value, any format including list
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeDSID, lengthDSID) = pylist2[0].split(':')
DSID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
for m in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[m])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeDVNAME, lengthDVNAME) = pylist4[0].split(':')
DVNAME = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1:
ok = False
break
#(typeDVVAL, lengthDVVAL) = pylist4[0].split(':')
DVVAL = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S6F9[R] | Formatted Variable Send |
Sent by Equipment Only |
Comment: like S6F3 without names
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F9 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 9, secs_receive_S6F9)
def secs_receive_S6F9(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F9.'''
ok = True
while ok: # break out of loop on error
# expect L:4 PFCD DATAID CEID {L:n {L:2 DSID {L:m DVVAL}}}
# PFCD B:1 (always) predefined form selector
# DATAID U4:1 (varies) an identifier to correlate related messages
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# DSID A:n (varies) data set ID, akin to a report type
# DVVAL A:n (varies) data value, any format including list
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
PFCD = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeDSID, lengthDSID) = pylist3[0].split(':')
DSID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for m in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[m])
if len(pylist4) < 1:
ok = False
break
#(typeDVVAL, lengthDVVAL) = pylist4[0].split(':')
DVVAL = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S6F9
| S6F10 | Formatted Variable Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F10 Python Parse reply
rcr = sp.sendSecsMsg(6, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC6
# ACKC6 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC6 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S6F11R | Event Report Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F11R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 11, secs_receive_S6F11R)
def secs_receive_S6F11R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F11R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 DATAID CEID {L:a {L:2 RPTID {L:b V}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# RPTID U4:1 (varies) report ID
# V A:n (varies) variable value, any type including list
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for a in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[a])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist3[0].split(':')
RPTID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for b in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[b])
if len(pylist4) < 1:
ok = False
break
#(typeV, lengthV) = pylist4[0].split(':')
V = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S6F11R
| S6F12 | Event Report Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F12 Python Parse reply
rcr = sp.sendSecsMsg(6, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC6
# ACKC6 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC6 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S6F13R | Annotated Event Report Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 13, secs_receive_S6F13R)
def secs_receive_S6F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 DATAID CEID {L:a {L:2 RPTID {L:b {L:2 VID V}}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# RPTID U4:1 (varies) report ID
# VID A:n (varies) A variable ID
# V A:n (varies) variable value, any type including list
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for a in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[a])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist3[0].split(':')
RPTID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for b in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[b])
if len(pylist4) != 3 or pylist4[0] != "L:2":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist5[0].split(':')
VID = (pylist5[1] if len(pylist5) == 2 else None)
pylist5 = lsplit(pylist4[2])
if len(pylist5) < 1:
ok = False
break
#(typeV, lengthV) = pylist5[0].split(':')
V = (pylist5[1] if len(pylist5) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S6F13R
| S6F14 | Annotated Event Report Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F14 Python Parse reply
rcr = sp.sendSecsMsg(6, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC6
# ACKC6 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC6 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S6F15R | Event Report Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 15, secs_receive_S6F15R)
def secs_receive_S6F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F15R.'''
ok = True
while ok: # break out of loop on error
# expect CEID
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist0[0].split(':')
CEID = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S6F15R
| S6F16 | Event Report Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F16 Python Parse reply
rcr = sp.sendSecsMsg(6, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 DATAID CEID {L:a {L:2 RPTID {L:b V}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# RPTID U4:1 (varies) report ID
# V A:n (varies) variable value, any type including list
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for a in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[a])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist3[0].split(':')
RPTID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for b in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[b])
if len(pylist4) < 1:
ok = False
break
#(typeV, lengthV) = pylist4[0].split(':')
V = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S6F17R | Annotated Event Report Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 17, secs_receive_S6F17R)
def secs_receive_S6F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F17R.'''
ok = True
while ok: # break out of loop on error
# expect CEID
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist0[0].split(':')
CEID = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S6F17R
| S6F18 | Annotated Event Report Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F18 Python Parse reply
rcr = sp.sendSecsMsg(6, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 DATAID CEID {L:a {L:2 RPTID {L:b {L:2 VID V}}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# RPTID U4:1 (varies) report ID
# VID A:n (varies) A variable ID
# V A:n (varies) variable value, any type including list
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for a in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[a])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist3[0].split(':')
RPTID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for b in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[b])
if len(pylist4) != 3 or pylist4[0] != "L:2":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist5[0].split(':')
VID = (pylist5[1] if len(pylist5) == 2 else None)
pylist5 = lsplit(pylist4[2])
if len(pylist5) < 1:
ok = False
break
#(typeV, lengthV) = pylist5[0].split(':')
V = (pylist5[1] if len(pylist5) == 2 else None)
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S6F19R | Individual Report Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F19R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 19, secs_receive_S6F19R)
def secs_receive_S6F19R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F19R.'''
ok = True
while ok: # break out of loop on error
# expect RPTID
# RPTID U4:1 (varies) report ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist0[0].split(':')
RPTID = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S6F19R
| S6F20 | Individual Report Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F20 Python Parse reply
rcr = sp.sendSecsMsg(6, 19, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n V
# V A:n (varies) variable value, any type including list
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeV, lengthV) = pylist1[0].split(':')
V = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S6F21R | Annotated Individual Report Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F21R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 21, secs_receive_S6F21R)
def secs_receive_S6F21R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F21R.'''
ok = True
while ok: # break out of loop on error
# expect RPTID
# RPTID U4:1 (varies) report ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist0[0].split(':')
RPTID = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 22, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S6F21R
| S6F22 | Annotated Individual Report Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F22 Python Parse reply
rcr = sp.sendSecsMsg(6, 21, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:2 VID V}
# VID A:n (varies) A variable ID
# V A:n (varies) variable value, any type including list
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist2[0].split(':')
VID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
#(typeV, lengthV) = pylist2[0].split(':')
V = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S6F23R | Request or Purge Spooled Data |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F23R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 23, secs_receive_S6F23R)
def secs_receive_S6F23R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F23R.'''
ok = True
while ok: # break out of loop on error
# expect RSDC
# RSDC U1:1 (always) spool request code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
RSDC = int(pylist0[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 24, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S6F23R
| S6F24 | Request or Purge Spooled Data Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F24 Python Parse reply
rcr = sp.sendSecsMsg(6, 23, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect RSDA
# RSDA B:1 (always) spool request reply
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
RSDA = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S6F25[R] | Notification Report Send |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F25 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 25, secs_receive_S6F25)
def secs_receive_S6F25(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F25.'''
ok = True
while ok: # break out of loop on error
# expect L:7 DATAID OPID LINKID RCPSPEC RMCHGSTAT {L:m {L:2 RCPATTRID RCPATTRDATA}} {L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# OPID U4:1 (varies) operation identifier
# LINKID U4:1 (always) correlates the RMOPID value in a request to a completion report
# RCPSPEC A:n (always) recipe specifier
# RMCHGSTAT U4:1 (varies) object change type
# RCPATTRID A:n (always) the name of a recipe attribute, but not used to indicate the recipe identifier
# RCPATTRDATA A:n (varies) the value of a recipe attribute, any type of data including list
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 8 or pylist0[0] != "L:7":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOPID, lengthOPID) = pylist1[0].split(':')
OPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
LINKID = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
#(typeRMCHGSTAT, lengthRMCHGSTAT) = pylist1[0].split(':')
RMCHGSTAT = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPATTRID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeRCPATTRDATA, lengthRCPATTRDATA) = pylist3[0].split(':')
RCPATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[7])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 26, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S6F25
| S6F26 | Notification Report Send Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F26 Python Parse reply
rcr = sp.sendSecsMsg(6, 25, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC6
# ACKC6 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC6 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S6F27[R] | Trace Report Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F27 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 27, secs_receive_S6F27)
def secs_receive_S6F27(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F27.'''
ok = True
while ok: # break out of loop on error
# expect L:3 DATAID TRID {L:n {L:p {L:2 RPTID {L:m V}}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# TRID A:n (varies) trace request ID
# RPTID U4:1 (varies) report ID
# V A:n (varies) variable value, any type including list
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist1[0].split(':')
TRID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist4[0].split(':')
RPTID = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1:
ok = False
break
for m in range(1, len(pylist4)):
pylist5 = lsplit(pylist4[m])
if len(pylist5) < 1:
ok = False
break
#(typeV, lengthV) = pylist5[0].split(':')
V = (pylist5[1] if len(pylist5) == 2 else None)
if not ok: break
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 28, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S6F27
| S6F28 | Trace Report Send Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F28 Python Parse reply
rcr = sp.sendSecsMsg(6, 27, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect TRID
# TRID A:n (varies) trace request ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist0[0].split(':')
TRID = (pylist0[1] if len(pylist0) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S6F29R | Trace Report Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F29R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 6, 29, secs_receive_S6F29R)
def secs_receive_S6F29R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S6F29R.'''
ok = True
while ok: # break out of loop on error
# expect TRID
# TRID A:n (varies) trace request ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist0[0].split(':')
TRID = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 6, 30, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S6F29R
| S6F30 | Trace Report Data |
Sent by Equipment Only |
Comment: ERRCODE is set to zero length when there is no error.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S6F30 Python Parse reply
rcr = sp.sendSecsMsg(6, 29, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 TRID {L:n {L:2 RPTID {L:m V}}} ERRCODE
# TRID A:n (varies) trace request ID
# RPTID U4:1 (varies) report ID
# V A:n (varies) variable value, any type including list
# ERRCODE U4:1 (varies) error code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist1[0].split(':')
TRID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist3[0].split(':')
RPTID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for m in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[m])
if len(pylist4) < 1:
ok = False
break
#(typeV, lengthV) = pylist4[0].split(':')
V = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist1[0].split(':')
ERRCODE = (pylist1[1] if len(pylist1) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S7F1R | Process Program Load Inquire |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 1, secs_receive_S7F1R)
def secs_receive_S7F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F1R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PPID LENGTH
# PPID A:80 (varies) process program ID
# LENGTH U4:1 (always) program length in bytes
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
LENGTH = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F1R
| S7F2 | Process Program Load Grant |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F2 Python Parse reply
rcr = sp.sendSecsMsg(7, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect PPGNT
# PPGNT B:1 (always) process program transfer grant status
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
PPGNT = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S7F3R | Process Program Send |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 3, secs_receive_S7F3R)
def secs_receive_S7F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F3R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PPID PPBODY
# PPID A:80 (varies) process program ID
# PPBODY (list)B:n (varies) process program data, any non-list type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typePPBODY, lengthPPBODY) = pylist1[0].split(':')
PPBODY = []
for i in range(0, len(PPBODY)):
PPBODY.append(sp.binToInt(pylist1[1+i])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F3R
| S7F4 | Process Program Send Acknowledge |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F4 Python Parse reply
rcr = sp.sendSecsMsg(7, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC7
# ACKC7 B:1 (always) S7 acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC7 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S7F5R | Process Program Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 5, secs_receive_S7F5R)
def secs_receive_S7F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F5R.'''
ok = True
while ok: # break out of loop on error
# expect PPID
# PPID A:80 (varies) process program ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist0[0].split(':')
PPID = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F5R
| S7F6 | Process Program Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F6 Python Parse reply
rcr = sp.sendSecsMsg(7, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 PPID PPBODY
# PPID A:80 (varies) process program ID
# PPBODY (list)B:n (varies) process program data, any non-list type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typePPBODY, lengthPPBODY) = pylist1[0].split(':')
PPBODY = []
for i in range(0, len(PPBODY)):
PPBODY.append(sp.binToInt(pylist1[1+i])
return # finished ok
# end while(ok)
# end def
| S7F7R | Process Program ID Request |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F7R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 7, secs_receive_S7F7R)
def secs_receive_S7F7R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F7R.'''
ok = True
while ok: # break out of loop on error
# expect MID
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist0[0].split(':')
MID = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F7R
| S7F8 | Process Program ID Data |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F8 Python Parse reply
rcr = sp.sendSecsMsg(7, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 PPID MID
# PPID A:80 (varies) process program ID
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S7F9R | Matl/Process Matrix Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F9R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 9, secs_receive_S7F9R)
def secs_receive_S7F9R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F9R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F9R
| S7F10 | Matl/Process Matrix Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F10 Python Parse reply
rcr = sp.sendSecsMsg(7, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:2 PPID {L:a MID}}
# PPID A:80 (varies) process program ID
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist2[0].split(':')
PPID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for a in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[a])
if len(pylist3) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist3[0].split(':')
MID = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S7F11[R] | Matl/Process Matrix Update Send |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F11 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 11, secs_receive_S7F11)
def secs_receive_S7F11(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F11.'''
ok = True
while ok: # break out of loop on error
# expect L:n {L:2 PPID {L:a MID}}
# PPID A:80 (varies) process program ID
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist2[0].split(':')
PPID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for a in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[a])
if len(pylist3) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist3[0].split(':')
MID = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S7F11
| S7F12 | Matl/Process Matrix Update Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F12 Python Parse reply
rcr = sp.sendSecsMsg(7, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC7
# ACKC7 B:1 (always) S7 acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC7 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S7F13[R] | Matl/Process Matrix Delete Entry Send |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F13 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 13, secs_receive_S7F13)
def secs_receive_S7F13(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F13.'''
ok = True
while ok: # break out of loop on error
# expect L:n {L:2 PPID {L:a MID}}
# PPID A:80 (varies) process program ID
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist2[0].split(':')
PPID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for a in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[a])
if len(pylist3) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist3[0].split(':')
MID = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S7F13
| S7F14 | Delete Matl/Process Matrix Entry Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F14 Python Parse reply
rcr = sp.sendSecsMsg(7, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC7
# ACKC7 B:1 (always) S7 acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC7 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S7F15R | Matrix Mode Select Send |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 15, secs_receive_S7F15R)
def secs_receive_S7F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F15R.'''
ok = True
while ok: # break out of loop on error
# expect MMODE
# MMODE B:1 (always) matrix mode selection
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
MMODE = sp.binToInt(pylist0[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S7F15R
| S7F16 | Matrix Mode Select Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F16 Python Parse reply
rcr = sp.sendSecsMsg(7, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC7
# ACKC7 B:1 (always) S7 acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC7 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S7F17R | Delete Process Program Send |
Sent by Host Only |
Comment: Host can send L:0 to delete all.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 17, secs_receive_S7F17R)
def secs_receive_S7F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F17R.'''
ok = True
while ok: # break out of loop on error
# expect L:n PPID
# PPID A:80 (varies) process program ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S7F17R
| S7F18 | Delete Process Program Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F18 Python Parse reply
rcr = sp.sendSecsMsg(7, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC7
# ACKC7 B:1 (always) S7 acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC7 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S7F19R | Current Process Program Dir Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F19R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 19, secs_receive_S7F19R)
def secs_receive_S7F19R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F19R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S7F19R
| S7F20 | Current Process Program Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F20 Python Parse reply
rcr = sp.sendSecsMsg(7, 19, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n PPID
# PPID A:80 (varies) process program ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S7F21 | Process Capabilities Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F21 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 21, secs_receive_S7F21)
def secs_receive_S7F21(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F21.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 22, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S7F21
| S7F22 | Process Capabilities Data |
Sent by Equipment Only |
Comment: L:x can be L:9, L:5, or L:4 with different data items
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F22 Python Parse reply
rcr = sp.sendSecsMsg(7, 21, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:5 MDLN SOFTREV CMDMAX BYTMAX {L:c {L:11 CCODE CNAME RQCMD BLKDEF BCDS IBCDS NBCDS ACDS IACDS NACDS {L:p L:x}}}
# MDLN A:20 (always) equipment model type
# SOFTREV A:20 (always) software revision
# CMDMAX U1:1 (varies) maximum number of commands allowed, 0=unlimited
# BYTMAX U4:1 (varies) process program maximum byte length, 0 means no limit
# CCODE A:n (varies) process operation command code
# CNAME A:16 (always) text name for a CCODE
# RQCMD TF:1 (always) flag that command is required
# BLKDEF I1:1 (always) command definition block relationship, standard incorrectly says type U1 is possible
# BCDS (list)U2:n (varies) before command code vector
# IBCDS (list)U2:n (varies) vector of immediately before command codes
# NBCDS (list)U2:n (varies) vector of not before command codes
# ACDS U2:1 (varies) after command codes
# IACDS (list)U2:n (varies) vector of immediately after command codes
# NACDS (list)U2:n (varies) vector of not after command codes
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
MDLN = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SOFTREV = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeCMDMAX, lengthCMDMAX) = pylist1[0].split(':')
CMDMAX = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeBYTMAX, lengthBYTMAX) = pylist1[0].split(':')
BYTMAX = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for c in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[c])
if len(pylist2) != 12 or pylist2[0] != "L:11":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCCODE, lengthCCODE) = pylist3[0].split(':')
CCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
CNAME = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or pylist3[0] != "TF:1":
ok = False
break
RQCMD = int(pylist3[1])
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1 or pylist3[0] != "I1:1":
ok = False
break
BLKDEF = int(pylist3[1])
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1:
ok = False
break
#(typeBCDS, lengthBCDS) = pylist3[0].split(':')
BCDS = []
for i in range(0, len(BCDS)):
BCDS.append(int(pylist3[1+i])
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1:
ok = False
break
#(typeIBCDS, lengthIBCDS) = pylist3[0].split(':')
IBCDS = []
for i in range(0, len(IBCDS)):
IBCDS.append(int(pylist3[1+i])
pylist3 = lsplit(pylist2[7])
if len(pylist3) < 1:
ok = False
break
#(typeNBCDS, lengthNBCDS) = pylist3[0].split(':')
NBCDS = []
for i in range(0, len(NBCDS)):
NBCDS.append(int(pylist3[1+i])
pylist3 = lsplit(pylist2[8])
if len(pylist3) < 1:
ok = False
break
#(typeACDS, lengthACDS) = pylist3[0].split(':')
ACDS = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[9])
if len(pylist3) < 1:
ok = False
break
#(typeIACDS, lengthIACDS) = pylist3[0].split(':')
IACDS = []
for i in range(0, len(IACDS)):
IACDS.append(int(pylist3[1+i])
pylist3 = lsplit(pylist2[10])
if len(pylist3) < 1:
ok = False
break
#(typeNACDS, lengthNACDS) = pylist3[0].split(':')
NACDS = []
for i in range(0, len(NACDS)):
NACDS.append(int(pylist3[1+i])
pylist3 = lsplit(pylist2[11])
if len(pylist3) < 1:
ok = False
break
for p in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[p])
if len(pylist4) != 1 or pylist4[0] != "L:x":
ok = False
break
# single token data such as L:0 or U4:0 has been received as expected
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S7F23R | Formatted Process Program Send |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F23R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 23, secs_receive_S7F23R)
def secs_receive_S7F23R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F23R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 PPID MDLN SOFTREV {L:c {L:2 CCODE {L:p PPARM}}}
# PPID A:80 (varies) process program ID
# MDLN A:20 (always) equipment model type
# SOFTREV A:20 (always) software revision
# CCODE A:n (varies) process operation command code
# PPARM A:n (varies) process parameter, any scalar or vector
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
MDLN = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SOFTREV = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for c in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[c])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCCODE, lengthCCODE) = pylist3[0].split(':')
CCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for p in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[p])
if len(pylist4) < 1:
ok = False
break
#(typePPARM, lengthPPARM) = pylist4[0].split(':')
PPARM = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 24, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F23R
| S7F24 | Formatted Process Program Acknowledge |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F24 Python Parse reply
rcr = sp.sendSecsMsg(7, 23, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC7
# ACKC7 B:1 (always) S7 acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC7 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S7F25R | Formatted Process Program Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F25R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 25, secs_receive_S7F25R)
def secs_receive_S7F25R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F25R.'''
ok = True
while ok: # break out of loop on error
# expect PPID
# PPID A:80 (varies) process program ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist0[0].split(':')
PPID = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 26, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F25R
| S7F26 | Formatted Process Program Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F26 Python Parse reply
rcr = sp.sendSecsMsg(7, 25, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:4 PPID MDLN SOFTREV {L:c {L:2 CCODE {L:p PPARM}}}
# PPID A:80 (varies) process program ID
# MDLN A:20 (always) equipment model type
# SOFTREV A:20 (always) software revision
# CCODE A:n (varies) process operation command code
# PPARM A:n (varies) process parameter, any scalar or vector
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
MDLN = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SOFTREV = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for c in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[c])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCCODE, lengthCCODE) = pylist3[0].split(':')
CCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for p in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[p])
if len(pylist4) < 1:
ok = False
break
#(typePPARM, lengthPPARM) = pylist4[0].split(':')
PPARM = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S7F27R | Process Program Verification Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F27R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 27, secs_receive_S7F27R)
def secs_receive_S7F27R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F27R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PPID {L:n {L:3 ACKC7A SEQNUM ERRW7}}
# PPID A:80 (varies) process program ID
# ACKC7A U4:1 (varies) process program check code
# SEQNUM U4:1 (varies) process program command number
# ERRW7 A:n (varies) process program error description
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeACKC7A, lengthACKC7A) = pylist3[0].split(':')
ACKC7A = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeSEQNUM, lengthSEQNUM) = pylist3[0].split(':')
SEQNUM = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1:
ok = False
break
#(typeERRW7, lengthERRW7) = pylist3[0].split(':')
ERRW7 = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 28, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F27R
| S7F28 | Process Program Verification Acknowledge |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F28 Python Parse reply
rcr = sp.sendSecsMsg(7, 27, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# no data expected
return # finished ok
# end while(ok)
# end def
| S7F29R | Process Program Verification Inquire |
Sent by Equipment Only |
Comment: This is a multiblock inquire for S7F27 so the LENGTH is the S7F27 message length an not the PP length.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F29R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 29, secs_receive_S7F29R)
def secs_receive_S7F29R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F29R.'''
ok = True
while ok: # break out of loop on error
# expect LENGTH
# LENGTH U4:1 (always) program length in bytes
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U4:1":
ok = False
break
LENGTH = int(pylist0[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 30, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F29R
| S7F30 | Process Program Verification Grant |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F30 Python Parse reply
rcr = sp.sendSecsMsg(7, 29, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect PPGNT
# PPGNT B:1 (always) process program transfer grant status
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
PPGNT = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S7F31R | Verification Request Send |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F31R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 31, secs_receive_S7F31R)
def secs_receive_S7F31R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F31R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 PPID MDLN SOFTREV {L:c {L:2 CCODE {L:p PPARM}}}
# PPID A:80 (varies) process program ID
# MDLN A:20 (always) equipment model type
# SOFTREV A:20 (always) software revision
# CCODE A:n (varies) process operation command code
# PPARM A:n (varies) process parameter, any scalar or vector
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
MDLN = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SOFTREV = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for c in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[c])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCCODE, lengthCCODE) = pylist3[0].split(':')
CCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for p in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[p])
if len(pylist4) < 1:
ok = False
break
#(typePPARM, lengthPPARM) = pylist4[0].split(':')
PPARM = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 32, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S7F31R
| S7F32 | Verification Request Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F32 Python Parse reply
rcr = sp.sendSecsMsg(7, 31, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC7
# ACKC7 B:1 (always) S7 acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC7 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S7F33R | Process Program Available Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F33R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 33, secs_receive_S7F33R)
def secs_receive_S7F33R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F33R.'''
ok = True
while ok: # break out of loop on error
# expect PPID
# PPID A:80 (varies) process program ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist0[0].split(':')
PPID = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 34, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F33R
| S7F34 | Process Program Availability Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F34 Python Parse reply
rcr = sp.sendSecsMsg(7, 33, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 PPID UNFLEN FRMLEN
# PPID A:80 (varies) process program ID
# UNFLEN U4:1 (varies) unformatted process program length if available, else 0
# FRMLEN U4:1 (varies) formatted process program length if available, else 0
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeUNFLEN, lengthUNFLEN) = pylist1[0].split(':')
UNFLEN = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeFRMLEN, lengthFRMLEN) = pylist1[0].split(':')
FRMLEN = (pylist1[1] if len(pylist1) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S7F35R | Process Program for MID Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F35R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 35, secs_receive_S7F35R)
def secs_receive_S7F35R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F35R.'''
ok = True
while ok: # break out of loop on error
# expect MID
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist0[0].split(':')
MID = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 36, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F35R
| S7F36 | Process Program for MID Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F36 Python Parse reply
rcr = sp.sendSecsMsg(7, 35, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 MID PPID PPBODY
# MID A:16 (varies) material ID, E40 restricts to A:n
# PPID A:80 (varies) process program ID
# PPBODY (list)B:n (varies) process program data, any non-list type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typePPID, lengthPPID) = pylist1[0].split(':')
PPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typePPBODY, lengthPPBODY) = pylist1[0].split(':')
PPBODY = []
for i in range(0, len(PPBODY)):
PPBODY.append(sp.binToInt(pylist1[1+i])
return # finished ok
# end while(ok)
# end def
| S7F37R | Large PP Send |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F37R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 37, secs_receive_S7F37R)
def secs_receive_S7F37R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F37R.'''
ok = True
while ok: # break out of loop on error
# expect DSNAME
# DSNAME A:50 (varies) the name of a dataset such as a PPID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeDSNAME, lengthDSNAME) = pylist0[0].split(':')
DSNAME = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 38, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F37R
| S7F38 | Large PP Send Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F38 Python Parse reply
rcr = sp.sendSecsMsg(7, 37, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC7
# ACKC7 B:1 (always) S7 acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC7 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S7F39R | Large Formatted PP Send |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F39R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 39, secs_receive_S7F39R)
def secs_receive_S7F39R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F39R.'''
ok = True
while ok: # break out of loop on error
# expect DSNAME
# DSNAME A:50 (varies) the name of a dataset such as a PPID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeDSNAME, lengthDSNAME) = pylist0[0].split(':')
DSNAME = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 40, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F39R
| S7F40 | Large Formatted PP Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F40 Python Parse reply
rcr = sp.sendSecsMsg(7, 39, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC7
# ACKC7 B:1 (always) S7 acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC7 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S7F41R | Large PP Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F41R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 41, secs_receive_S7F41R)
def secs_receive_S7F41R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F41R.'''
ok = True
while ok: # break out of loop on error
# expect DSNAME
# DSNAME A:50 (varies) the name of a dataset such as a PPID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeDSNAME, lengthDSNAME) = pylist0[0].split(':')
DSNAME = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 42, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F41R
| S7F42 | Large PP Req Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F42 Python Parse reply
rcr = sp.sendSecsMsg(7, 41, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC7
# ACKC7 B:1 (always) S7 acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC7 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S7F43R | Large Formatted PP Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F43R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 7, 43, secs_receive_S7F43R)
def secs_receive_S7F43R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S7F43R.'''
ok = True
while ok: # break out of loop on error
# expect DSNAME
# DSNAME A:50 (varies) the name of a dataset such as a PPID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeDSNAME, lengthDSNAME) = pylist0[0].split(':')
DSNAME = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 7, 44, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S7F43R
| S7F44 | Large Formatted PP Req Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S7F44 Python Parse reply
rcr = sp.sendSecsMsg(7, 43, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC7
# ACKC7 B:1 (always) S7 acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC7 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S8F1R | Boot Program Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S8F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 8, 1, secs_receive_S8F1R)
def secs_receive_S8F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S8F1R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 8, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S8F1R
| S8F2 | Boot Program Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S8F2 Python Parse reply
rcr = sp.sendSecsMsg(8, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect BPD
# BPD (list)B:n (always) boot program data, the fantasy of using SECS for boot programs has been revived
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("B:"):
ok = False
break
BPD = []
for i in range(0, len(BPD)):
BPD.append(sp.binToInt(pylist0[1+i])
return # finished ok
# end while(ok)
# end def
| S8F3R | Executive Program Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S8F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 8, 3, secs_receive_S8F3R)
def secs_receive_S8F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S8F3R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 8, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S8F3R
| S8F4 | Executive Program Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S8F4 Python Parse reply
rcr = sp.sendSecsMsg(8, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect EPD
# EPD (list)B:n (always) executive program data, the fantasy of using SECS for this has been revived
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("B:"):
ok = False
break
EPD = []
for i in range(0, len(EPD)):
EPD.append(sp.binToInt(pylist0[1+i])
return # finished ok
# end while(ok)
# end def
| S9F1 | Unknown Device ID |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S9F1 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 9, 1, secs_receive_S9F1)
def secs_receive_S9F1(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S9F1.'''
ok = True
while ok: # break out of loop on error
# expect MHEAD
# MHEAD (list)B:10 (always) message header of received block
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("B:"):
ok = False
break
MHEAD = []
for i in range(0, len(MHEAD)):
MHEAD.append(sp.binToInt(pylist0[1+i])
# here by break from while ok
# end recv_S9F1
| S9F3 | Unknown Stream |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S9F3 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 9, 3, secs_receive_S9F3)
def secs_receive_S9F3(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S9F3.'''
ok = True
while ok: # break out of loop on error
# expect MHEAD
# MHEAD (list)B:10 (always) message header of received block
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("B:"):
ok = False
break
MHEAD = []
for i in range(0, len(MHEAD)):
MHEAD.append(sp.binToInt(pylist0[1+i])
# here by break from while ok
# end recv_S9F3
| S9F5 | Unknown Function |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S9F5 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 9, 5, secs_receive_S9F5)
def secs_receive_S9F5(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S9F5.'''
ok = True
while ok: # break out of loop on error
# expect MHEAD
# MHEAD (list)B:10 (always) message header of received block
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("B:"):
ok = False
break
MHEAD = []
for i in range(0, len(MHEAD)):
MHEAD.append(sp.binToInt(pylist0[1+i])
# here by break from while ok
# end recv_S9F5
| S9F7 | Illegal Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S9F7 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 9, 7, secs_receive_S9F7)
def secs_receive_S9F7(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S9F7.'''
ok = True
while ok: # break out of loop on error
# expect MHEAD
# MHEAD (list)B:10 (always) message header of received block
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("B:"):
ok = False
break
MHEAD = []
for i in range(0, len(MHEAD)):
MHEAD.append(sp.binToInt(pylist0[1+i])
# here by break from while ok
# end recv_S9F7
| S9F9 | Transaction Timeout |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S9F9 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 9, 9, secs_receive_S9F9)
def secs_receive_S9F9(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S9F9.'''
ok = True
while ok: # break out of loop on error
# expect SHEAD
# SHEAD (list)B:10 (always) message header of sent block
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("B:"):
ok = False
break
SHEAD = []
for i in range(0, len(SHEAD)):
SHEAD.append(sp.binToInt(pylist0[1+i])
# here by break from while ok
# end recv_S9F9
| S9F11 | Data Too Long |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S9F11 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 9, 11, secs_receive_S9F11)
def secs_receive_S9F11(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S9F11.'''
ok = True
while ok: # break out of loop on error
# expect MHEAD
# MHEAD (list)B:10 (always) message header of received block
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("B:"):
ok = False
break
MHEAD = []
for i in range(0, len(MHEAD)):
MHEAD.append(sp.binToInt(pylist0[1+i])
# here by break from while ok
# end recv_S9F11
| S9F13 | Conversation Timeout |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S9F13 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 9, 13, secs_receive_S9F13)
def secs_receive_S9F13(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S9F13.'''
ok = True
while ok: # break out of loop on error
# expect L:2 MEXP EDID
# MEXP A:6 (always) message expected in form of SxxFyy
# EDID A:80 (varies) expected data identification, PPID or SPID or PTN
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
MEXP = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeEDID, lengthEDID) = pylist1[0].split(':')
EDID = (pylist1[1] if len(pylist1) == 2 else None)
# here by break from while ok
# end recv_S9F13
| S10F1[R] | Terminal Request |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S10F1 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 10, 1, secs_receive_S10F1)
def secs_receive_S10F1(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S10F1.'''
ok = True
while ok: # break out of loop on error
# expect L:2 TID TEXT
# TID B:1 (always) terminal ID
# TEXT A:120 (varies) line of text for display, no standard max size
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
TID = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeTEXT, lengthTEXT) = pylist1[0].split(':')
TEXT = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 10, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S10F1
| S10F2 | Terminal Request Acknowledge |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S10F2 Python Parse reply
rcr = sp.sendSecsMsg(10, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC10
# ACKC10 B:1 (always) acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC10 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S10F3[R] | Terminal Display, Single |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S10F3 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 10, 3, secs_receive_S10F3)
def secs_receive_S10F3(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S10F3.'''
ok = True
while ok: # break out of loop on error
# expect L:2 TID TEXT
# TID B:1 (always) terminal ID
# TEXT A:120 (varies) line of text for display, no standard max size
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
TID = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeTEXT, lengthTEXT) = pylist1[0].split(':')
TEXT = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 10, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S10F3
| S10F4 | Terminal Display, Single Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S10F4 Python Parse reply
rcr = sp.sendSecsMsg(10, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC10
# ACKC10 B:1 (always) acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC10 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S10F5[R] | Terminal Display, Multi-Block |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S10F5 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 10, 5, secs_receive_S10F5)
def secs_receive_S10F5(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S10F5.'''
ok = True
while ok: # break out of loop on error
# expect L:2 TID {L:n TEXT}
# TID B:1 (always) terminal ID
# TEXT A:120 (varies) line of text for display, no standard max size
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
TID = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeTEXT, lengthTEXT) = pylist2[0].split(':')
TEXT = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 10, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S10F5
| S10F6 | Terminal Display, Multi-Block Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S10F6 Python Parse reply
rcr = sp.sendSecsMsg(10, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC10
# ACKC10 B:1 (always) acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC10 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S10F7 | Multi-block Not Allowed |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S10F7 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 10, 7, secs_receive_S10F7)
def secs_receive_S10F7(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S10F7.'''
ok = True
while ok: # break out of loop on error
# expect TID
# TID B:1 (always) terminal ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
TID = sp.binToInt(pylist0[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 10, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S10F7
| S10F9 | Broadcast |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S10F9 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 10, 9, secs_receive_S10F9)
def secs_receive_S10F9(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S10F9.'''
ok = True
while ok: # break out of loop on error
# expect TEXT
# TEXT A:120 (varies) line of text for display, no standard max size
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeTEXT, lengthTEXT) = pylist0[0].split(':')
TEXT = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 10, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S10F9
| S10F10 | Broadcast Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S10F10 Python Parse reply
rcr = sp.sendSecsMsg(10, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC10
# ACKC10 B:1 (always) acknowledge code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC10 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S12F1R | Map Setup Data Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 12, 1, secs_receive_S12F1R)
def secs_receive_S12F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S12F1R.'''
ok = True
while ok: # break out of loop on error
# expect L:15 MID IDTYP FNLOC FFROT ORLOC RPSEL {L:n REFP} DUTMS XDIES YDIES ROWCT COLCT NULBC PRDCT PRAXI
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
# FNLOC U2:1 (always) flat/notch location in degrees clockwise from bottom
# FFROT U2:1 (always) film frame location in degrees clockwise from bottom
# ORLOC B:1 (always) origin location
# RPSEL U1:1 (always) reference point select
# REFP (list)I4:2 (varies) x y reference point
# DUTMS A:n (always) die units of measure (per E5 Section 12)
# XDIES F4:1 (varies) X-axis die size
# YDIES F4:1 (varies) Y-axis die size
# ROWCT U4:1 (varies) row count in die increments
# COLCT U4:1 (varies) column count in die increments
# NULBC A:n (varies) null bin code value
# PRDCT U4:1 (varies) process die count
# PRAXI B:1 (always) process access
pylist0 = lsplit(TSN_data)
if len(pylist0) != 16 or pylist0[0] != "L:15":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U2:1":
ok = False
break
FNLOC = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or pylist1[0] != "U2:1":
ok = False
break
FFROT = int(pylist1[1])
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ORLOC = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RPSEL = int(pylist1[1])
pylist1 = lsplit(pylist0[7])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeREFP, lengthREFP) = pylist2[0].split(':')
REFP = []
for i in range(0, len(REFP)):
REFP.append(int(pylist2[1+i])
if not ok: break
pylist1 = lsplit(pylist0[8])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
DUTMS = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[9])
if len(pylist1) < 1:
ok = False
break
#(typeXDIES, lengthXDIES) = pylist1[0].split(':')
XDIES = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[10])
if len(pylist1) < 1:
ok = False
break
#(typeYDIES, lengthYDIES) = pylist1[0].split(':')
YDIES = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[11])
if len(pylist1) < 1:
ok = False
break
#(typeROWCT, lengthROWCT) = pylist1[0].split(':')
ROWCT = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[12])
if len(pylist1) < 1:
ok = False
break
#(typeCOLCT, lengthCOLCT) = pylist1[0].split(':')
COLCT = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[13])
if len(pylist1) < 1:
ok = False
break
#(typeNULBC, lengthNULBC) = pylist1[0].split(':')
NULBC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[14])
if len(pylist1) < 1:
ok = False
break
#(typePRDCT, lengthPRDCT) = pylist1[0].split(':')
PRDCT = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[15])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
PRAXI = sp.binToInt(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 12, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S12F1R
| S12F2 | Map Setup Data Acknowledge |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F2 Python Parse reply
rcr = sp.sendSecsMsg(12, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect SDACK
# SDACK B:1 (always) setup data ack, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
SDACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S12F3R | Map Setup Data Request |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 12, 3, secs_receive_S12F3R)
def secs_receive_S12F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S12F3R.'''
ok = True
while ok: # break out of loop on error
# expect L:9 MID IDTYP MAPFT FNLOC FFROT ORLOC PRAXI BCEQU NULBC
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
# MAPFT B:1 (always) map data format type
# FNLOC U2:1 (always) flat/notch location in degrees clockwise from bottom
# FFROT U2:1 (always) film frame location in degrees clockwise from bottom
# ORLOC B:1 (always) origin location
# PRAXI B:1 (always) process access
# BCEQU (list)U1:n (varies) array of bin code equivalents
# NULBC A:n (varies) null bin code value
pylist0 = lsplit(TSN_data)
if len(pylist0) != 10 or pylist0[0] != "L:9":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
MAPFT = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or pylist1[0] != "U2:1":
ok = False
break
FNLOC = int(pylist1[1])
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or pylist1[0] != "U2:1":
ok = False
break
FFROT = int(pylist1[1])
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ORLOC = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[7])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
PRAXI = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[8])
if len(pylist1) < 1:
ok = False
break
#(typeBCEQU, lengthBCEQU) = pylist1[0].split(':')
BCEQU = []
for i in range(0, len(BCEQU)):
BCEQU.append(int(pylist1[1+i])
pylist1 = lsplit(pylist0[9])
if len(pylist1) < 1:
ok = False
break
#(typeNULBC, lengthNULBC) = pylist1[0].split(':')
NULBC = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 12, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S12F3R
| S12F4 | Map Setup Data |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F4 Python Parse reply
rcr = sp.sendSecsMsg(12, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:15 MID IDTYP FNLOC ORLOC RPSEL {L:n REFP} DUTMS XDIES YDIES ROWCT COLCT PRDCT BCEQU NULBC MLCL
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
# FNLOC U2:1 (always) flat/notch location in degrees clockwise from bottom
# ORLOC B:1 (always) origin location
# RPSEL U1:1 (always) reference point select
# REFP (list)I4:2 (varies) x y reference point
# DUTMS A:n (always) die units of measure (per E5 Section 12)
# XDIES F4:1 (varies) X-axis die size
# YDIES F4:1 (varies) Y-axis die size
# ROWCT U4:1 (varies) row count in die increments
# COLCT U4:1 (varies) column count in die increments
# PRDCT U4:1 (varies) process die count
# BCEQU (list)U1:n (varies) array of bin code equivalents
# NULBC A:n (varies) null bin code value
# MLCL U4:1 (varies) message length in bytes
pylist0 = lsplit(TSN_data)
if len(pylist0) != 16 or pylist0[0] != "L:15":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U2:1":
ok = False
break
FNLOC = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ORLOC = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RPSEL = int(pylist1[1])
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeREFP, lengthREFP) = pylist2[0].split(':')
REFP = []
for i in range(0, len(REFP)):
REFP.append(int(pylist2[1+i])
if not ok: break
pylist1 = lsplit(pylist0[7])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
DUTMS = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[8])
if len(pylist1) < 1:
ok = False
break
#(typeXDIES, lengthXDIES) = pylist1[0].split(':')
XDIES = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[9])
if len(pylist1) < 1:
ok = False
break
#(typeYDIES, lengthYDIES) = pylist1[0].split(':')
YDIES = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[10])
if len(pylist1) < 1:
ok = False
break
#(typeROWCT, lengthROWCT) = pylist1[0].split(':')
ROWCT = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[11])
if len(pylist1) < 1:
ok = False
break
#(typeCOLCT, lengthCOLCT) = pylist1[0].split(':')
COLCT = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[12])
if len(pylist1) < 1:
ok = False
break
#(typePRDCT, lengthPRDCT) = pylist1[0].split(':')
PRDCT = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[13])
if len(pylist1) < 1:
ok = False
break
#(typeBCEQU, lengthBCEQU) = pylist1[0].split(':')
BCEQU = []
for i in range(0, len(BCEQU)):
BCEQU.append(int(pylist1[1+i])
pylist1 = lsplit(pylist0[14])
if len(pylist1) < 1:
ok = False
break
#(typeNULBC, lengthNULBC) = pylist1[0].split(':')
NULBC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[15])
if len(pylist1) < 1:
ok = False
break
#(typeMLCL, lengthMLCL) = pylist1[0].split(':')
MLCL = (pylist1[1] if len(pylist1) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S12F5R | Map Transmit Inquire |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 12, 5, secs_receive_S12F5R)
def secs_receive_S12F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S12F5R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 MID IDTYP MAPFT MLCL
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
# MAPFT B:1 (always) map data format type
# MLCL U4:1 (varies) message length in bytes
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
MAPFT = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeMLCL, lengthMLCL) = pylist1[0].split(':')
MLCL = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 12, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S12F5R
| S12F6 | Map Transmit Grant |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F6 Python Parse reply
rcr = sp.sendSecsMsg(12, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect GRNT1
# GRNT1 B:1 (always) grant code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
GRNT1 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S12F7R | Map Data Send Type 1 |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F7R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 12, 7, secs_receive_S12F7R)
def secs_receive_S12F7R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S12F7R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 MID IDTYP {L:n {L:2 RSINF BINLT}}
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
# RSINF (list)I4:3 (varies) starting location for row or column, x,y,direction triplet
# BINLT (list)U1:n (varies) array of bin values, text or U1 array
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeRSINF, lengthRSINF) = pylist3[0].split(':')
RSINF = []
for i in range(0, len(RSINF)):
RSINF.append(int(pylist3[1+i])
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeBINLT, lengthBINLT) = pylist3[0].split(':')
BINLT = []
for i in range(0, len(BINLT)):
BINLT.append(int(pylist3[1+i])
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 12, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S12F7R
| S12F8 | Map Data Ack Type 1 |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F8 Python Parse reply
rcr = sp.sendSecsMsg(12, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect MDACK
# MDACK B:1 (always) map data ack
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
MDACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S12F9R | Map Data Send Type 2 |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F9R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 12, 9, secs_receive_S12F9R)
def secs_receive_S12F9R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S12F9R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 MID IDTYP STRP BINLT
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
# STRP (list)I2:2 (varies) x y die coordinate starting position
# BINLT (list)U1:n (varies) array of bin values, text or U1 array
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeSTRP, lengthSTRP) = pylist1[0].split(':')
STRP = []
for i in range(0, len(STRP)):
STRP.append(int(pylist1[1+i])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeBINLT, lengthBINLT) = pylist1[0].split(':')
BINLT = []
for i in range(0, len(BINLT)):
BINLT.append(int(pylist1[1+i])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 12, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S12F9R
| S12F10 | Map Data Ack Type 2 |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F10 Python Parse reply
rcr = sp.sendSecsMsg(12, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect MDACK
# MDACK B:1 (always) map data ack
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
MDACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S12F11R | Map Data Send Type 3 |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F11R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 12, 11, secs_receive_S12F11R)
def secs_receive_S12F11R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S12F11R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 MID IDTYP {L:n {L:2 XYPOS BINLT}}
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
# XYPOS (list)I2:2 (varies) x y coordinate position
# BINLT (list)U1:n (varies) array of bin values, text or U1 array
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeXYPOS, lengthXYPOS) = pylist3[0].split(':')
XYPOS = []
for i in range(0, len(XYPOS)):
XYPOS.append(int(pylist3[1+i])
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeBINLT, lengthBINLT) = pylist3[0].split(':')
BINLT = []
for i in range(0, len(BINLT)):
BINLT.append(int(pylist3[1+i])
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 12, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S12F11R
| S12F12 | Map Data Ack Type 3 |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F12 Python Parse reply
rcr = sp.sendSecsMsg(12, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect MDACK
# MDACK B:1 (always) map data ack
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
MDACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S12F13R | Map Data Request Type 1 |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 12, 13, secs_receive_S12F13R)
def secs_receive_S12F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S12F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 MID IDTYP
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 12, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S12F13R
| S12F14 | Map Data Type 1 |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F14 Python Parse reply
rcr = sp.sendSecsMsg(12, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 MID IDTYP {L:n {L:2 RSINF BINLT}}
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
# RSINF (list)I4:3 (varies) starting location for row or column, x,y,direction triplet
# BINLT (list)U1:n (varies) array of bin values, text or U1 array
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeRSINF, lengthRSINF) = pylist3[0].split(':')
RSINF = []
for i in range(0, len(RSINF)):
RSINF.append(int(pylist3[1+i])
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeBINLT, lengthBINLT) = pylist3[0].split(':')
BINLT = []
for i in range(0, len(BINLT)):
BINLT.append(int(pylist3[1+i])
if not ok: break
return # finished ok
# end while(ok)
# end def
| S12F15R | Map Data Request Type 2 |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 12, 15, secs_receive_S12F15R)
def secs_receive_S12F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S12F15R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 MID IDTYP
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 12, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S12F15R
| S12F16 | Map Data Type 2 |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F16 Python Parse reply
rcr = sp.sendSecsMsg(12, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:4 MID IDTYP STRP BINLT
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
# STRP (list)I2:2 (varies) x y die coordinate starting position
# BINLT (list)U1:n (varies) array of bin values, text or U1 array
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeSTRP, lengthSTRP) = pylist1[0].split(':')
STRP = []
for i in range(0, len(STRP)):
STRP.append(int(pylist1[1+i])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeBINLT, lengthBINLT) = pylist1[0].split(':')
BINLT = []
for i in range(0, len(BINLT)):
BINLT.append(int(pylist1[1+i])
return # finished ok
# end while(ok)
# end def
| S12F17R | Map Data Request Type 3 |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 12, 17, secs_receive_S12F17R)
def secs_receive_S12F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S12F17R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 MID IDTYP SDBIN
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
# SDBIN B:1 (always) send bin data flag, 0=send, else do not
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
SDBIN = sp.binToInt(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 12, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S12F17R
| S12F18 | Map Data Type 3 |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F18 Python Parse reply
rcr = sp.sendSecsMsg(12, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 MID IDTYP {L:n {L:2 XYPOS BINLT}}
# MID A:16 (varies) material ID, E40 restricts to A:n
# IDTYP B:1 (always) ID type
# XYPOS (list)I2:2 (varies) x y coordinate position
# BINLT (list)U1:n (varies) array of bin values, text or U1 array
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
IDTYP = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeXYPOS, lengthXYPOS) = pylist3[0].split(':')
XYPOS = []
for i in range(0, len(XYPOS)):
XYPOS.append(int(pylist3[1+i])
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeBINLT, lengthBINLT) = pylist3[0].split(':')
BINLT = []
for i in range(0, len(BINLT)):
BINLT.append(int(pylist3[1+i])
if not ok: break
return # finished ok
# end while(ok)
# end def
| S12F19 | Map Error Report Send |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S12F19 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 12, 19, secs_receive_S12F19)
def secs_receive_S12F19(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S12F19.'''
ok = True
while ok: # break out of loop on error
# expect L:2 MAPER DATLC
# MAPER B:1 (always) map error
# DATLC U1:1 (always) location of invalid data, offset in bytes in the SECS-II message body
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
MAPER = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
DATLC = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 12, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S12F19
| S13F1R | Send Data Set Send |
Sent by Host and Equipment |
Comment: S13F1 seems to have the L: wrapper that S13F2 is missing. Be prepared to receive DSNAME without the L:
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 13, 1, secs_receive_S13F1R)
def secs_receive_S13F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S13F1R.'''
ok = True
while ok: # break out of loop on error
# expect L:1 DSNAME
# DSNAME A:50 (varies) the name of a dataset such as a PPID
pylist0 = lsplit(TSN_data)
if len(pylist0) != 2 or pylist0[0] != "L:1":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDSNAME, lengthDSNAME) = pylist1[0].split(':')
DSNAME = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 13, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S13F1R
| S13F2 | Send Data Set Ack |
Sent by Host and Equipment |
Comment: The standards have had an erroneous structure for years - the L:2 has been missing. Unfortunately some implementations have not realized it was an error. The latest Hume versions automagically create the L:2 wrapper when it is missing.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F2 Python Parse reply
rcr = sp.sendSecsMsg(13, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 DSNAME ACKC13
# DSNAME A:50 (varies) the name of a dataset such as a PPID
# ACKC13 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDSNAME, lengthDSNAME) = pylist1[0].split(':')
DSNAME = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ACKC13 = sp.binToInt(pylist1[1])
return # finished ok
# end while(ok)
# end def
| S13F3R | Open Data Set Request |
Sent by Host and Equipment |
Comment: Sent by the receiver to open a data set for reading
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 13, 3, secs_receive_S13F3R)
def secs_receive_S13F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S13F3R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 HANDLE DSNAME CKPNT
# HANDLE (list)U4 (varies) logical unit or handle for a data set
# DSNAME A:50 (varies) the name of a dataset such as a PPID
# CKPNT U4:1 (always) data set checkpoint defined by sender
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeHANDLE, lengthHANDLE) = pylist1[0].split(':')
HANDLE = []
for i in range(0, len(HANDLE)):
HANDLE.append(int(pylist1[1+i])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeDSNAME, lengthDSNAME) = pylist1[0].split(':')
DSNAME = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
CKPNT = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 13, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S13F3R
| S13F4 | Open Data Set Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F4 Python Parse reply
rcr = sp.sendSecsMsg(13, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:5 HANDLE DSNAME ACKC13 RTYPE RECLEN
# HANDLE (list)U4 (varies) logical unit or handle for a data set
# DSNAME A:50 (varies) the name of a dataset such as a PPID
# ACKC13 B:1 (always) acknowledge code, 0 ok
# RTYPE U1:1 (varies) type of data record
# RECLEN U4:1 (varies) maximum number of bytes or characters in a discrete record
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeHANDLE, lengthHANDLE) = pylist1[0].split(':')
HANDLE = []
for i in range(0, len(HANDLE)):
HANDLE.append(int(pylist1[1+i])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeDSNAME, lengthDSNAME) = pylist1[0].split(':')
DSNAME = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ACKC13 = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeRTYPE, lengthRTYPE) = pylist1[0].split(':')
RTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
#(typeRECLEN, lengthRECLEN) = pylist1[0].split(':')
RECLEN = (pylist1[1] if len(pylist1) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S13F5R | Read Data Set Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 13, 5, secs_receive_S13F5R)
def secs_receive_S13F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S13F5R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 HANDLE READLN
# HANDLE (list)U4 (varies) logical unit or handle for a data set
# READLN U4:1 (varies) maximum number of bytes or characters to read
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeHANDLE, lengthHANDLE) = pylist1[0].split(':')
HANDLE = []
for i in range(0, len(HANDLE)):
HANDLE.append(int(pylist1[1+i])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeREADLN, lengthREADLN) = pylist1[0].split(':')
READLN = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 13, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S13F5R
| S13F6 | Read Data Set Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F6 Python Parse reply
rcr = sp.sendSecsMsg(13, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:4 HANDLE ACKC13 CKPNT {L:n FILDAT}
# HANDLE (list)U4 (varies) logical unit or handle for a data set
# ACKC13 B:1 (always) acknowledge code, 0 ok
# CKPNT U4:1 (always) data set checkpoint defined by sender
# FILDAT (list)B (varies) Data Set Data, binary or ascii. Max length is the RECLEN from open.
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeHANDLE, lengthHANDLE) = pylist1[0].split(':')
HANDLE = []
for i in range(0, len(HANDLE)):
HANDLE.append(int(pylist1[1+i])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ACKC13 = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
CKPNT = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeFILDAT, lengthFILDAT) = pylist2[0].split(':')
FILDAT = []
for i in range(0, len(FILDAT)):
FILDAT.append(sp.binToInt(pylist2[1+i])
if not ok: break
return # finished ok
# end while(ok)
# end def
| S13F7R | Close Data Set Send |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F7R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 13, 7, secs_receive_S13F7R)
def secs_receive_S13F7R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S13F7R.'''
ok = True
while ok: # break out of loop on error
# expect L:1 HANDLE
# HANDLE (list)U4 (varies) logical unit or handle for a data set
pylist0 = lsplit(TSN_data)
if len(pylist0) != 2 or pylist0[0] != "L:1":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeHANDLE, lengthHANDLE) = pylist1[0].split(':')
HANDLE = []
for i in range(0, len(HANDLE)):
HANDLE.append(int(pylist1[1+i])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 13, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S13F7R
| S13F8 | Close Data Set Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F8 Python Parse reply
rcr = sp.sendSecsMsg(13, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 HANDLE ACKC13
# HANDLE (list)U4 (varies) logical unit or handle for a data set
# ACKC13 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeHANDLE, lengthHANDLE) = pylist1[0].split(':')
HANDLE = []
for i in range(0, len(HANDLE)):
HANDLE.append(int(pylist1[1+i])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ACKC13 = sp.binToInt(pylist1[1])
return # finished ok
# end while(ok)
# end def
| S13F9R | Reset Data Set Send |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F9R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 13, 9, secs_receive_S13F9R)
def secs_receive_S13F9R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S13F9R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 13, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S13F9R
| S13F10 | Reset Data Set Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F10 Python Parse reply
rcr = sp.sendSecsMsg(13, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# no data expected
return # finished ok
# end while(ok)
# end def
| S13F11R | Data Set Obj Multi-Block Inquire |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F11R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 13, 11, secs_receive_S13F11R)
def secs_receive_S13F11R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S13F11R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 DATAID OBJSPEC DATALENGTH
# DATAID U4:1 (varies) an identifier to correlate related messages
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# DATALENGTH U4:1 (varies) total bytes of the message body
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeDATALENGTH, lengthDATALENGTH) = pylist1[0].split(':')
DATALENGTH = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 13, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S13F11R
| S13F12 | Data Set Obj Multi-Block Grant |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F12 Python Parse reply
rcr = sp.sendSecsMsg(13, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect GRANT
# GRANT B:1 (always) multiblock grant code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
GRANT = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S13F13R | Table Data Send |
Sent by Host and Equipment |
Comment: The first element of every row is a primary key value which identifies the row. The row items correspond in sequence to the column headers. E58 uses attributes NumCols, NumRows, and DataLength
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 13, 13, secs_receive_S13F13R)
def secs_receive_S13F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S13F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:8 DATAID OBJSPEC TBLTYP TBLID TBLCMD {L:n {L:2 ATTRID ATTRDATA}} {L:c COLHDR} {L:r {L:m TBLELT}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# TBLTYP A:n (always) denotes the format and application of the table, conforms to OBJTYPE
# TBLID A:80 (varies) table identifier, a kind of OBJSPEC
# TBLCMD U1:1 (always) table command
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
# COLHDR A:20 (always) table column name
# TBLELT A:n (varies) table element any type, list types or array types are discouraged, first column type must be a primary key value and not be a list or array
pylist0 = lsplit(TSN_data)
if len(pylist0) != 9 or pylist0[0] != "L:8":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TBLTYP = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeTBLID, lengthTBLID) = pylist1[0].split(':')
TBLID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
TBLCMD = int(pylist1[1])
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[7])
if len(pylist1) < 1:
ok = False
break
for c in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[c])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
COLHDR = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[8])
if len(pylist1) < 1:
ok = False
break
for r in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[r])
if len(pylist2) < 1:
ok = False
break
for m in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[m])
if len(pylist3) < 1:
ok = False
break
#(typeTBLELT, lengthTBLELT) = pylist3[0].split(':')
TBLELT = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 13, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S13F13R
| S13F14 | Table Data Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F14 Python Parse reply
rcr = sp.sendSecsMsg(13, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 TBLACK {L:p {L:2 ERRCODE ERRTEXT}}
# TBLACK U1:1 (always) acknowledge code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
TBLACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S13F15R | Table Data Request |
Sent by Host and Equipment |
Comment: Either p or q or both are 0.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 13, 15, secs_receive_S13F15R)
def secs_receive_S13F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S13F15R.'''
ok = True
while ok: # break out of loop on error
# expect L:7 DATAID OBJSPEC TBLTYP TBLID TBLCMD {L:p COLHDR} {L:q TBLELT}
# DATAID U4:1 (varies) an identifier to correlate related messages
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# TBLTYP A:n (always) denotes the format and application of the table, conforms to OBJTYPE
# TBLID A:80 (varies) table identifier, a kind of OBJSPEC
# TBLCMD U1:1 (always) table command
# COLHDR A:20 (always) table column name
# TBLELT A:n (varies) table element any type, list types or array types are discouraged, first column type must be a primary key value and not be a list or array
pylist0 = lsplit(TSN_data)
if len(pylist0) != 8 or pylist0[0] != "L:7":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TBLTYP = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeTBLID, lengthTBLID) = pylist1[0].split(':')
TBLID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
TBLCMD = int(pylist1[1])
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
COLHDR = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[7])
if len(pylist1) < 1:
ok = False
break
for q in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[q])
if len(pylist2) < 1:
ok = False
break
#(typeTBLELT, lengthTBLELT) = pylist2[0].split(':')
TBLELT = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 13, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S13F15R
| S13F16 | Table Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S13F16 Python Parse reply
rcr = sp.sendSecsMsg(13, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:6 TBLTYP TBLID {L:n {L:2 ATTRID ATTRDATA}} {L:c COLHDR} {L:r {L:c TBLELT}} {L:2 TBLACK {L:p ERRCODE ERRTEXT}}
# TBLTYP A:n (always) denotes the format and application of the table, conforms to OBJTYPE
# TBLID A:80 (varies) table identifier, a kind of OBJSPEC
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
# COLHDR A:20 (always) table column name
# TBLELT A:n (varies) table element any type, list types or array types are discouraged, first column type must be a primary key value and not be a list or array
# TBLACK U1:1 (always) acknowledge code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 7 or pylist0[0] != "L:6":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TBLTYP = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeTBLID, lengthTBLID) = pylist1[0].split(':')
TBLID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for c in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[c])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
COLHDR = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for r in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[r])
if len(pylist2) < 1:
ok = False
break
for c in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[c])
if len(pylist3) < 1:
ok = False
break
#(typeTBLELT, lengthTBLELT) = pylist3[0].split(':')
TBLELT = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if not ok: break
pylist1 = lsplit(pylist0[6])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
TBLACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[p])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S14F1R | Get Attributes Request |
Sent by Host and Equipment |
Comment: List lengths can be 0, and OBJSPEC can be zero-length.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 1, secs_receive_S14F1R)
def secs_receive_S14F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F1R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 OBJSPEC OBJTYPE {L:i OBJID} {L:q {L:3 ATTRID ATTRDATA ATTRRELN}} {L:a ATTRID}
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
# ATTRRELN U1:1 (always) relationship of a value to an attribute value of an object
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for i in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[i])
if len(pylist2) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist2[0].split(':')
OBJID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for q in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[q])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
ATTRRELN = int(pylist3[1])
if not ok: break
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for a in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[a])
if len(pylist2) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist2[0].split(':')
ATTRID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F1R
| S14F2 | Attribute Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F2 Python Parse reply
rcr = sp.sendSecsMsg(14, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:n {L:2 OBJID {L:a {L:2 ATTRID ATTRDATA}}}} {L:2 OBJACK {L:p {L:2 ERRCODE ERRTEXT}}}
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
# OBJACK U1:1 (always) acknowledge code, 0 ok, 1 error
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist3[0].split(':')
OBJID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for a in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[a])
if len(pylist4) != 3 or pylist4[0] != "L:2":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist5[0].split(':')
ATTRID = (pylist5[1] if len(pylist5) == 2 else None)
pylist5 = lsplit(pylist4[2])
if len(pylist5) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist5[0].split(':')
ATTRDATA = (pylist5[1] if len(pylist5) == 2 else None)
if not ok: break
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
OBJACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S14F3R | Set Attributes |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 3, secs_receive_S14F3R)
def secs_receive_S14F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F3R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 OBJSPEC OBJTYPE {L:i OBJID} {L:n {L:2 ATTRID ATTRDATA}}
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for i in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[i])
if len(pylist2) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist2[0].split(':')
OBJID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F3R
| S14F4 | Set Attributes Reply |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F4 Python Parse reply
rcr = sp.sendSecsMsg(14, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:i {L:2 OBJID {L:n {L:2 ATTRID ATTRDATA}}}} {L:2 OBJACK {L:p {L:2 ERRCODE ERRTEXT}}}
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
# OBJACK U1:1 (always) acknowledge code, 0 ok, 1 error
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for i in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[i])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist3[0].split(':')
OBJID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for n in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[n])
if len(pylist4) != 3 or pylist4[0] != "L:2":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist5[0].split(':')
ATTRID = (pylist5[1] if len(pylist5) == 2 else None)
pylist5 = lsplit(pylist4[2])
if len(pylist5) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist5[0].split(':')
ATTRDATA = (pylist5[1] if len(pylist5) == 2 else None)
if not ok: break
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
OBJACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S14F5R | Get Type Data |
Sent by Host and Equipment |
Comment: Asks for the types of objects owned by the type of specified object
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 5, secs_receive_S14F5R)
def secs_receive_S14F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F5R.'''
ok = True
while ok: # break out of loop on error
# expect OBJSPEC
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist0[0].split(':')
OBJSPEC = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F5R
| S14F6 | Type Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F6 Python Parse reply
rcr = sp.sendSecsMsg(14, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:n OBJTYPE} {L:2 OBJACK {L:p {L:2 ERRCODE ERRTEXT}}}
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJACK U1:1 (always) acknowledge code, 0 ok, 1 error
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist2[0].split(':')
OBJTYPE = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
OBJACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S14F7R | Get Attribute Names for the types |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F7R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 7, secs_receive_S14F7R)
def secs_receive_S14F7R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F7R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 OBJSPEC {L:n OBJTYPE}
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist2[0].split(':')
OBJTYPE = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F7R
| S14F8 | Attribute Names of the object types |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F8 Python Parse reply
rcr = sp.sendSecsMsg(14, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:n {L:2 OBJTYPE {L:a ATTRID}}} {L:2 OBJACK {L:p {L:2 ERRCODE ERRTEXT}}}
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# OBJACK U1:1 (always) acknowledge code, 0 ok, 1 error
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist3[0].split(':')
OBJTYPE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for a in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[a])
if len(pylist4) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist4[0].split(':')
ATTRID = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
OBJACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S14F9R | Create Obj Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F9R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 9, secs_receive_S14F9R)
def secs_receive_S14F9R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F9R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 OBJSPEC OBJTYPE {L:a {L:2 ATTRID ATTRDATA}}
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for a in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[a])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F9R
| S14F10 | Create Obj Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F10 Python Parse reply
rcr = sp.sendSecsMsg(14, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 OBJSPEC {L:b {L:2 ATTRID ATTRDATA}} {L:2 OBJACK {L:p {L:2 ERRCODE ERRTEXT}}}
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
# OBJACK U1:1 (always) acknowledge code, 0 ok, 1 error
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for b in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[b])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[3])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
OBJACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S14F11R | Delete Obj Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F11R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 11, secs_receive_S14F11R)
def secs_receive_S14F11R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F11R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 OBJSPEC {L:a {L:2 ATTRID ATTRDATA}}
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for a in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[a])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F11R
| S14F12 | Delete Obj Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F12 Python Parse reply
rcr = sp.sendSecsMsg(14, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:b {L:2 ATTRID ATTRDATA}} {L:2 OBJACK {L:p {L:2 ERRCODE ERRTEXT}}}
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
# OBJACK U1:1 (always) acknowledge code, 0 ok, 1 error
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for b in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[b])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
OBJACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S14F13R | Object Attach Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 13, secs_receive_S14F13R)
def secs_receive_S14F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 OBJSPEC {L:a {L:2 ATTRID ATTRDATA}}
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for a in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[a])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F13R
| S14F14 | Object Attach Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F14 Python Parse reply
rcr = sp.sendSecsMsg(14, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 OBJTOKEN {L:b {L:2 ATTRID ATTRDATA}} {L:2 OBJACK {L:p {L:2 ERRCODE ERRTEXT}}}
# OBJTOKEN U4:1 (always) token used for authorization
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
# OBJACK U1:1 (always) acknowledge code, 0 ok, 1 error
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
OBJTOKEN = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for b in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[b])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[3])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
OBJACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S14F15R | Attached Obj Action Req. |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 15, secs_receive_S14F15R)
def secs_receive_S14F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F15R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 OBJSPEC OBJCMD OBJTOKEN {L:a {L:2 ATTRID ATTRDATA}}
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# OBJCMD U1:1 (always) Specifies an action to be performed by an object
# OBJTOKEN U4:1 (always) token used for authorization
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OBJCMD = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
OBJTOKEN = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for a in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[a])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F15R
| S14F16 | Attached Obj Action Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F16 Python Parse reply
rcr = sp.sendSecsMsg(14, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:b {L:2 ATTRID ATTRDATA}} {L:2 OBJACK {L:p {L:2 ERRCODE ERRTEXT}}}
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
# OBJACK U1:1 (always) acknowledge code, 0 ok, 1 error
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for b in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[b])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
OBJACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S14F17R | Supervised Obj Action Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 17, secs_receive_S14F17R)
def secs_receive_S14F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F17R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 OBJSPEC OBJCMD TARGETSPEC {L:a {L:2 ATTRID ATTRDATA}}
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# OBJCMD U1:1 (always) Specifies an action to be performed by an object
# TARGETSPEC A:40 (always) Specifier of target object
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OBJCMD = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for a in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[a])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F17R
| S14F18 | Supervised Obj Action Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F18 Python Parse reply
rcr = sp.sendSecsMsg(14, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:b {L:2 ATTRID ATTRDATA}} {L:2 OBJACK {L:p {L:2 ERRCODE ERRTEXT}}}
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
# OBJACK U1:1 (always) acknowledge code, 0 ok, 1 error
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for b in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[b])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
OBJACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S14F19R | Generic Service Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F19R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 19, secs_receive_S14F19R)
def secs_receive_S14F19R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F19R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 DATAID OPID OBJSPEC SVCNAME {L:m {L:2 SPNAME SPVAL}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# OPID U4:1 (varies) operation identifier
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# SVCNAME A:n (always) service name
# SPNAME A:n (always) service parameter name
# SPVAL A:n (varies) service parameter value, any format type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOPID, lengthOPID) = pylist1[0].split(':')
OPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SVCNAME = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
SPNAME = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeSPVAL, lengthSPVAL) = pylist3[0].split(':')
SPVAL = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S14F19R
| S14F20 | Generic Service Ack |
Sent by Host and Equipment |
Comment: it is not a mistake that SVCACK is included twice
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F20 Python Parse reply
rcr = sp.sendSecsMsg(14, 19, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:4 SVCACK LINKID {L:n {L:2 SPNAME SPVAL}} {L:2 SVCACK {L:p {L:2 ERRCODE ERRTEXT}}}
# SVCACK B:1 (always) service acknowledge code
# LINKID U4:1 (always) correlates the RMOPID value in a request to a completion report
# SPNAME A:n (always) service parameter name
# SPVAL A:n (varies) service parameter value, any format type
# SVCACK B:1 (always) service acknowledge code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
SVCACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
LINKID = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
SPNAME = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeSPVAL, lengthSPVAL) = pylist3[0].split(':')
SPVAL = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[4])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "B:1":
ok = False
break
SVCACK = sp.binToInt(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S14F21R | Generic Service Completion |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F21R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 21, secs_receive_S14F21R)
def secs_receive_S14F21R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F21R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 DATAID OPID LINKID {L:n {L:2 SPNAME SPVAL}} {L:2 SVCACK {L:p {L:2 ERRCODE ERRTEXT}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# OPID U4:1 (varies) operation identifier
# LINKID U4:1 (always) correlates the RMOPID value in a request to a completion report
# SPNAME A:n (always) service parameter name
# SPVAL A:n (varies) service parameter value, any format type
# SVCACK B:1 (always) service acknowledge code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOPID, lengthOPID) = pylist1[0].split(':')
OPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
LINKID = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
SPNAME = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeSPVAL, lengthSPVAL) = pylist3[0].split(':')
SPVAL = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[5])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "B:1":
ok = False
break
SVCACK = sp.binToInt(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 22, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F21R
| S14F22 | Generic Service Comp Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F22 Python Parse reply
rcr = sp.sendSecsMsg(14, 21, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect DATAACK
# DATAACK B:1 (always) Acknowledgement code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
DATAACK = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S14F23R | Multi-block Generic Service Inquire |
Sent by Host and Equipment |
Comment: You are advised not to implement this message.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F23R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 23, secs_receive_S14F23R)
def secs_receive_S14F23R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F23R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 DATAID DATALENGTH
# DATAID U4:1 (varies) an identifier to correlate related messages
# DATALENGTH U4:1 (varies) total bytes of the message body
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeDATALENGTH, lengthDATALENGTH) = pylist1[0].split(':')
DATALENGTH = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 24, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F23R
| S14F24 | Multi-block Generic Service Grant |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F24 Python Parse reply
rcr = sp.sendSecsMsg(14, 23, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect GRANT
# GRANT B:1 (always) multiblock grant code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
GRANT = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S14F25R | Service Name Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F25R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 25, secs_receive_S14F25R)
def secs_receive_S14F25R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F25R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 OBJSPEC {L:n OBJTYPE}
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist2[0].split(':')
OBJTYPE = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 26, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F25R
| S14F26 | Service Name Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F26 Python Parse reply
rcr = sp.sendSecsMsg(14, 25, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:n {L:2 OBJTYPE {L:a SVCNAME}}} {L:2 OBJACK {L:p {L:2 ERRCODE ERRTEXT}}}
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# SVCNAME A:n (always) service name
# OBJACK U1:1 (always) acknowledge code, 0 ok, 1 error
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist3[0].split(':')
OBJTYPE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for a in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[a])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
SVCNAME = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
OBJACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S14F27R | Service Parameter Name Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F27R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 14, 27, secs_receive_S14F27R)
def secs_receive_S14F27R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S14F27R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 OBJSPEC OBJTYPE {L:n SVCNAME}
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# SVCNAME A:n (always) service name
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
SVCNAME = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 14, 28, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S14F27R
| S14F28 | Service Parameter Name Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S14F28 Python Parse reply
rcr = sp.sendSecsMsg(14, 27, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:n {L:2 SVCNAME {L:a SPNAME}}} {L:2 OBJACK {L:p {L:2 ERRCODE ERRTEXT}}}
# SVCNAME A:n (always) service name
# SPNAME A:n (always) service parameter name
# OBJACK U1:1 (always) acknowledge code, 0 ok, 1 error
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
SVCNAME = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for a in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[a])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
SPNAME = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
OBJACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F1R | Recipe Management Multi-Block Inquire |
Sent by Host and Equipment |
Comment: E5 fails to mention the message type is optional for HSMS
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 1, secs_receive_S15F1R)
def secs_receive_S15F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F1R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 DATAID RCPSPEC RMDATASIZE
# DATAID U4:1 (varies) an identifier to correlate related messages
# RCPSPEC A:n (always) recipe specifier
# RMDATASIZE U4:1 (varies) the maximum total message body length of a SECS-II message
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeRMDATASIZE, lengthRMDATASIZE) = pylist1[0].split(':')
RMDATASIZE = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F1R
| S15F2 | Recipe Management Multi-block Grant |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F2 Python Parse reply
rcr = sp.sendSecsMsg(15, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect RMGRNT
# RMGRNT B:1 (always) grant code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
RMGRNT = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S15F3R | Recipe Namespace Action Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 3, secs_receive_S15F3R)
def secs_receive_S15F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F3R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 RMNSSPEC RMNSCMD
# RMNSSPEC A:n (always) object id of a recipe namespace
# RMNSCMD U1:1 (always) recipe namespace command
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMNSSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMNSCMD = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F3R
| S15F4 | Recipe Namespace Action |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F4 Python Parse reply
rcr = sp.sendSecsMsg(15, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F5R | Recipe Namespace Rename Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 5, secs_receive_S15F5R)
def secs_receive_S15F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F5R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 RMNSSPEC RMNEWNS
# RMNSSPEC A:n (always) object id of a recipe namespace
# RMNEWNS A:n (always) new name for a recipe namespace
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMNSSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMNEWNS = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F5R
| S15F6 | Recipe Namespace Rename Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F6 Python Parse reply
rcr = sp.sendSecsMsg(15, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F7R | Recipe Space Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F7R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 7, secs_receive_S15F7R)
def secs_receive_S15F7R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F7R.'''
ok = True
while ok: # break out of loop on error
# expect OBJSPEC
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist0[0].split(':')
OBJSPEC = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F7R
| S15F8 | Recipe Space Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F8 Python Parse reply
rcr = sp.sendSecsMsg(15, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RMSPACE {L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}}
# RMSPACE U4:1 (varies) the amount of storage available in bytes for at least one recipe
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeRMSPACE, lengthRMSPACE) = pylist1[0].split(':')
RMSPACE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F9R | Recipe Status Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F9R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 9, secs_receive_S15F9R)
def secs_receive_S15F9R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F9R.'''
ok = True
while ok: # break out of loop on error
# expect RCPSPEC
# RCPSPEC A:n (always) recipe specifier
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist0[1] if len(pylist0) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F9R
| S15F10 | Recipe Status Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F10 Python Parse reply
rcr = sp.sendSecsMsg(15, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 RCPSTAT RCPVERS {L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}}
# RCPSTAT U1:1 (always) Recipe status code
# RCPVERS A:n (always) recipe version
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RCPSTAT = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPVERS = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F11R | Recipe Version Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F11R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 11, secs_receive_S15F11R)
def secs_receive_S15F11R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F11R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 RMNSSPEC RCPCLASS RCPNAME AGENT
# RMNSSPEC A:n (always) object id of a recipe namespace
# RCPCLASS A:n (always) Recipe class
# RCPNAME A:n (always) recipe name
# AGENT A:n (always) no description, no max length
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMNSSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPCLASS = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPNAME = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
AGENT = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F11R
| S15F12 | Recipe Version Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F12 Python Parse reply
rcr = sp.sendSecsMsg(15, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 AGENT RCPVERS {L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}}
# AGENT A:n (always) no description, no max length
# RCPVERS A:n (always) recipe version
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
AGENT = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPVERS = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F13R | Recipe Create Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 13, secs_receive_S15F13R)
def secs_receive_S15F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 DATAID RCPUPDT RCPSPEC {L:m {L:2 RCPATTRID RCPATTRDATA}} RCPBODY
# DATAID U4:1 (varies) an identifier to correlate related messages
# RCPUPDT TF:1 (always) true for a recipe update, false for create
# RCPSPEC A:n (always) recipe specifier
# RCPATTRID A:n (always) the name of a recipe attribute, but not used to indicate the recipe identifier
# RCPATTRDATA A:n (varies) the value of a recipe attribute, any type of data including list
# RCPBODY (list)B:n (varies) Recipe body
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
RCPUPDT = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPATTRID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeRCPATTRDATA, lengthRCPATTRDATA) = pylist3[0].split(':')
RCPATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
#(typeRCPBODY, lengthRCPBODY) = pylist1[0].split(':')
RCPBODY = []
for i in range(0, len(RCPBODY)):
RCPBODY.append(sp.binToInt(pylist1[1+i])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F13R
| S15F14 | Recipe Create Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F14 Python Parse reply
rcr = sp.sendSecsMsg(15, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F15R | Recipe Store Req |
Sent by Host and Equipment |
Comment: L:2* can be L:2 or L:0; E5 documentation is inadequate for L:q other than L:3
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 15, secs_receive_S15F15R)
def secs_receive_S15F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F15R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 DATAID RCPSPEC RCPSECCODE {L:3 {L:2* RCPSECNM {L:g {L:2 RCPATTRID RCPATTRDATA}}} RCPBODY {L:m {L:2 RCPSECNM {L:a {L:2 RCPATTRID RCPATTRDATA}}}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# RCPSPEC A:n (always) recipe specifier
# RCPSECCODE B:1 (always) indicates the sections of a recipe
# RCPSECNM A:n (always) Recipe section name, "Generic", "Body", "ASDS"
# RCPATTRID A:n (always) the name of a recipe attribute, but not used to indicate the recipe identifier
# RCPATTRDATA A:n (varies) the value of a recipe attribute, any type of data including list
# RCPBODY (list)B:n (varies) Recipe body
# RCPSECNM A:n (always) Recipe section name, "Generic", "Body", "ASDS"
# RCPATTRID A:n (always) the name of a recipe attribute, but not used to indicate the recipe identifier
# RCPATTRDATA A:n (varies) the value of a recipe attribute, any type of data including list
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
RCPSECCODE = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) != 4 or pylist1[0] != "L:3":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) == 3: # 2 optional items found
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPSECNM = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for g in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[g])
if len(pylist4) != 3 or pylist4[0] != "L:2":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1 or not pylist5[0].startswith("A:"):
ok = False
break
RCPATTRID = (pylist5[1] if len(pylist5) == 2 else "")
pylist5 = lsplit(pylist4[2])
if len(pylist5) < 1:
ok = False
break
#(typeRCPATTRDATA, lengthRCPATTRDATA) = pylist5[0].split(':')
RCPATTRDATA = (pylist5[1] if len(pylist5) == 2 else None)
if not ok: break
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
#(typeRCPBODY, lengthRCPBODY) = pylist2[0].split(':')
RCPBODY = []
for i in range(0, len(RCPBODY)):
RCPBODY.append(sp.binToInt(pylist2[1+i])
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1:
ok = False
break
for m in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[m])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
RCPSECNM = (pylist4[1] if len(pylist4) == 2 else "")
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1:
ok = False
break
for a in range(1, len(pylist4)):
pylist5 = lsplit(pylist4[a])
if len(pylist5) != 3 or pylist5[0] != "L:2":
ok = False
break
pylist6 = lsplit(pylist5[1])
if len(pylist6) < 1 or not pylist6[0].startswith("A:"):
ok = False
break
RCPATTRID = (pylist6[1] if len(pylist6) == 2 else "")
pylist6 = lsplit(pylist5[2])
if len(pylist6) < 1:
ok = False
break
#(typeRCPATTRDATA, lengthRCPATTRDATA) = pylist6[0].split(':')
RCPATTRDATA = (pylist6[1] if len(pylist6) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F15R
| S15F16 | Recipe Store Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F16 Python Parse reply
rcr = sp.sendSecsMsg(15, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RCPSECCODE {L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}}
# RCPSECCODE B:1 (always) indicates the sections of a recipe
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
RCPSECCODE = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F17R | Recipe Retrieve Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 17, secs_receive_S15F17R)
def secs_receive_S15F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F17R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 RCPSPEC RCPSECCODE
# RCPSPEC A:n (always) recipe specifier
# RCPSECCODE B:1 (always) indicates the sections of a recipe
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
RCPSECCODE = sp.binToInt(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F17R
| S15F18 | Recipe Retrieve Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F18 Python Parse reply
rcr = sp.sendSecsMsg(15, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:q {L:r RCPSECNM {L:g {L:2 RCPATTRID RCPATTRDATA}}} RCPBODY {L:m {L:2 RCPSECNM {L:a {L:2 RCPATTRID RCPATTRDATA}}}}} {L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}}
# RCPSECNM A:n (always) Recipe section name, "Generic", "Body", "ASDS"
# RCPATTRID A:n (always) the name of a recipe attribute, but not used to indicate the recipe identifier
# RCPATTRDATA A:n (varies) the value of a recipe attribute, any type of data including list
# RCPBODY (list)B:n (varies) Recipe body
# RCPSECNM A:n (always) Recipe section name, "Generic", "Body", "ASDS"
# RCPATTRID A:n (always) the name of a recipe attribute, but not used to indicate the recipe identifier
# RCPATTRDATA A:n (varies) the value of a recipe attribute, any type of data including list
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for q in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[q])
if len(pylist2) < 1:
ok = False
break
for r in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[r])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPSECNM = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[r])
if len(pylist3) < 1:
ok = False
break
for g in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[g])
if len(pylist4) != 3 or pylist4[0] != "L:2":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1 or not pylist5[0].startswith("A:"):
ok = False
break
RCPATTRID = (pylist5[1] if len(pylist5) == 2 else "")
pylist5 = lsplit(pylist4[2])
if len(pylist5) < 1:
ok = False
break
#(typeRCPATTRDATA, lengthRCPATTRDATA) = pylist5[0].split(':')
RCPATTRDATA = (pylist5[1] if len(pylist5) == 2 else None)
if not ok: break
if not ok: break
pylist2 = lsplit(pylist1[q])
if len(pylist2) < 1:
ok = False
break
#(typeRCPBODY, lengthRCPBODY) = pylist2[0].split(':')
RCPBODY = []
for i in range(0, len(RCPBODY)):
RCPBODY.append(sp.binToInt(pylist2[1+i])
pylist2 = lsplit(pylist1[q])
if len(pylist2) < 1:
ok = False
break
for m in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[m])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
RCPSECNM = (pylist4[1] if len(pylist4) == 2 else "")
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1:
ok = False
break
for a in range(1, len(pylist4)):
pylist5 = lsplit(pylist4[a])
if len(pylist5) != 3 or pylist5[0] != "L:2":
ok = False
break
pylist6 = lsplit(pylist5[1])
if len(pylist6) < 1 or not pylist6[0].startswith("A:"):
ok = False
break
RCPATTRID = (pylist6[1] if len(pylist6) == 2 else "")
pylist6 = lsplit(pylist5[2])
if len(pylist6) < 1:
ok = False
break
#(typeRCPATTRDATA, lengthRCPATTRDATA) = pylist6[0].split(':')
RCPATTRDATA = (pylist6[1] if len(pylist6) == 2 else None)
if not ok: break
if not ok: break
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F19R | Recipe Rename Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F19R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 19, secs_receive_S15F19R)
def secs_receive_S15F19R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F19R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 RCPSPEC RCPRENAME RCPNEWID
# RCPSPEC A:n (always) recipe specifier
# RCPRENAME TF:1 (always) whether a recipe is to be renamed (TRUE) or copied (FALSE)
# RCPNEWID A:n (always) the new recipe identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
RCPRENAME = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPNEWID = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F19R
| S15F20 | Recipe Rename Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F20 Python Parse reply
rcr = sp.sendSecsMsg(15, 19, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F21R | Recipe Action Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F21R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 21, secs_receive_S15F21R)
def secs_receive_S15F21R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F21R.'''
ok = True
while ok: # break out of loop on error
# expect L:6 DATAID RCPCMD RMNSSPEC OPID AGENT {L:n RCPID}
# DATAID U4:1 (varies) an identifier to correlate related messages
# RCPCMD U1:1 (always) recipe action
# RMNSSPEC A:n (always) object id of a recipe namespace
# OPID U4:1 (varies) operation identifier
# AGENT A:n (always) no description, no max length
# RCPID A:n (always) recipe identifier conforming to OBJSPEC
pylist0 = lsplit(TSN_data)
if len(pylist0) != 7 or pylist0[0] != "L:6":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RCPCMD = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMNSSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeOPID, lengthOPID) = pylist1[0].split(':')
OPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
AGENT = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
RCPID = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 22, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F21R
| S15F22 | Recipe Action Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F22 Python Parse reply
rcr = sp.sendSecsMsg(15, 21, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:4 AGENT LINKID RCPCMD {L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}}
# AGENT A:n (always) no description, no max length
# LINKID U4:1 (always) correlates the RMOPID value in a request to a completion report
# RCPCMD U1:1 (always) recipe action
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
AGENT = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
LINKID = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RCPCMD = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F23R | Recipe Descriptor Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F23R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 23, secs_receive_S15F23R)
def secs_receive_S15F23R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F23R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 DATAID OBJSPEC {L:n RCPID}
# DATAID U4:1 (varies) an identifier to correlate related messages
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# RCPID A:n (always) recipe identifier conforming to OBJSPEC
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
RCPID = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 24, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F23R
| S15F24 | Recipe Descriptor Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F24 Python Parse reply
rcr = sp.sendSecsMsg(15, 23, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:n {L:a {L:3* RCPDESCNM RCPDESCTIME RCPDESCLTH}}} {L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}}
# RCPDESCNM A:n (always) Identifies a descriptor type "ASDesc", "BodyDesc", "GenDesc"
# RCPDESCTIME A:16 (always) timestamp of a recipe section "YYYYMMDDhhmmsscc"
# RCPDESCLTH U4:1 (varies) the byte length of a recipe
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
for a in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[a])
if len(pylist3) == 4: # 3 optional items found
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
RCPDESCNM = (pylist4[1] if len(pylist4) == 2 else "")
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
RCPDESCTIME = (pylist4[1] if len(pylist4) == 2 else "")
pylist4 = lsplit(pylist3[3])
if len(pylist4) < 1:
ok = False
break
#(typeRCPDESCLTH, lengthRCPDESCLTH) = pylist4[0].split(':')
RCPDESCLTH = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F25R | Recipe Parameter Update Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F25R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 25, secs_receive_S15F25R)
def secs_receive_S15F25R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F25R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 DATAID RMNSSPEC AGENT {L:n {L:3 RCPPARNM RCPPARVAL RCPPARRULE}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# RMNSSPEC A:n (always) object id of a recipe namespace
# AGENT A:n (always) no description, no max length
# RCPPARNM A:256 (always) the name of a recipe variable parameter
# RCPPARVAL A:80 (varies) the value of a recipe variable parameter, any scalar format type
# RCPPARRULE A:80 (always) the restrictions applied to a recipe variable parameter setting
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMNSSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
AGENT = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPPARNM = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeRCPPARVAL, lengthRCPPARVAL) = pylist3[0].split(':')
RCPPARVAL = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPPARRULE = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 26, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F25R
| S15F26 | Recipe Parameter Update Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F26 Python Parse reply
rcr = sp.sendSecsMsg(15, 25, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F27R | Recipe Download Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F27R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 27, secs_receive_S15F27R)
def secs_receive_S15F27R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F27R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 DATAID RCPOWCODE RCPSPEC {L:m {L:2 RCPATTRID RCPATTRDATA}} RCPBODY
# DATAID U4:1 (varies) an identifier to correlate related messages
# RCPOWCODE TF:1 (always) recipe overwrite code, true=overwrite ok, false=do not overwrite
# RCPSPEC A:n (always) recipe specifier
# RCPATTRID A:n (always) the name of a recipe attribute, but not used to indicate the recipe identifier
# RCPATTRDATA A:n (varies) the value of a recipe attribute, any type of data including list
# RCPBODY (list)B:n (varies) Recipe body
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
RCPOWCODE = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPATTRID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeRCPATTRDATA, lengthRCPATTRDATA) = pylist3[0].split(':')
RCPATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
#(typeRCPBODY, lengthRCPBODY) = pylist1[0].split(':')
RCPBODY = []
for i in range(0, len(RCPBODY)):
RCPBODY.append(sp.binToInt(pylist1[1+i])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 28, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S15F27R
| S15F28 | Recipe Download Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F28 Python Parse reply
rcr = sp.sendSecsMsg(15, 27, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 RCPID {L:n {L:2 RCPATTRID RCPATTRDATA}} {L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}}
# RCPID A:n (always) recipe identifier conforming to OBJSPEC
# RCPATTRID A:n (always) the name of a recipe attribute, but not used to indicate the recipe identifier
# RCPATTRDATA A:n (varies) the value of a recipe attribute, any type of data including list
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPATTRID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeRCPATTRDATA, lengthRCPATTRDATA) = pylist3[0].split(':')
RCPATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[3])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F29R | Recipe Verify Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F29R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 29, secs_receive_S15F29R)
def secs_receive_S15F29R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F29R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 DATAID OPID RESPEC {L:m RCPID}
# DATAID U4:1 (varies) an identifier to correlate related messages
# OPID U4:1 (varies) operation identifier
# RESPEC A:n (always) object specifier for the recipe executor
# RCPID A:n (always) recipe identifier conforming to OBJSPEC
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOPID, lengthOPID) = pylist1[0].split(':')
OPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RESPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
RCPID = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 30, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S15F29R
| S15F30 | Recipe Verify Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F30 Python Parse reply
rcr = sp.sendSecsMsg(15, 29, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:5 OPID LINKID RCPID {L:n {L:2 RCPATTRID RCPATTRDATA}} {L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}}
# OPID U4:1 (varies) operation identifier
# LINKID U4:1 (always) correlates the RMOPID value in a request to a completion report
# RCPID A:n (always) recipe identifier conforming to OBJSPEC
# RCPATTRID A:n (always) the name of a recipe attribute, but not used to indicate the recipe identifier
# RCPATTRDATA A:n (varies) the value of a recipe attribute, any type of data including list
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOPID, lengthOPID) = pylist1[0].split(':')
OPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
LINKID = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPATTRID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeRCPATTRDATA, lengthRCPATTRDATA) = pylist3[0].split(':')
RCPATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[5])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F31R | Recipe Unload Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F31R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 31, secs_receive_S15F31R)
def secs_receive_S15F31R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F31R.'''
ok = True
while ok: # break out of loop on error
# expect RCPSPEC
# RCPSPEC A:n (always) recipe specifier
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist0[1] if len(pylist0) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 32, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S15F31R
| S15F32 | Recipe Unload Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F32 Python Parse reply
rcr = sp.sendSecsMsg(15, 31, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:4 RCPSPEC {L:m {L:2 RCPATTRID RCPATTRDATA}} RCPBODY {L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}}
# RCPSPEC A:n (always) recipe specifier
# RCPATTRID A:n (always) the name of a recipe attribute, but not used to indicate the recipe identifier
# RCPATTRDATA A:n (varies) the value of a recipe attribute, any type of data including list
# RCPBODY (list)B:n (varies) Recipe body
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPATTRID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeRCPATTRDATA, lengthRCPATTRDATA) = pylist3[0].split(':')
RCPATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeRCPBODY, lengthRCPBODY) = pylist1[0].split(':')
RCPBODY = []
for i in range(0, len(RCPBODY)):
RCPBODY.append(sp.binToInt(pylist1[1+i])
pylist1 = lsplit(pylist0[4])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F33R | Recipe Select Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F33R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 33, secs_receive_S15F33R)
def secs_receive_S15F33R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F33R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 DATAID RESPEC {L:r {L:2 RCPID {L:p {L:2 RCPPARNM RCPPARVAL}}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# RESPEC A:n (always) object specifier for the recipe executor
# RCPID A:n (always) recipe identifier conforming to OBJSPEC
# RCPPARNM A:256 (always) the name of a recipe variable parameter
# RCPPARVAL A:80 (varies) the value of a recipe variable parameter, any scalar format type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RESPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for r in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[r])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for p in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[p])
if len(pylist4) != 3 or pylist4[0] != "L:2":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1 or not pylist5[0].startswith("A:"):
ok = False
break
RCPPARNM = (pylist5[1] if len(pylist5) == 2 else "")
pylist5 = lsplit(pylist4[2])
if len(pylist5) < 1:
ok = False
break
#(typeRCPPARVAL, lengthRCPPARVAL) = pylist5[0].split(':')
RCPPARVAL = (pylist5[1] if len(pylist5) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 34, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S15F33R
| S15F34 | Recipe Select Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F34 Python Parse reply
rcr = sp.sendSecsMsg(15, 33, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F35R | Recipe Delete Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F35R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 35, secs_receive_S15F35R)
def secs_receive_S15F35R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F35R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 DATAID RESPEC RCPDEL {L:n RCPID}
# DATAID U4:1 (varies) an identifier to correlate related messages
# RESPEC A:n (always) object specifier for the recipe executor
# RCPDEL U1:1 (always) recipe action
# RCPID A:n (always) recipe identifier conforming to OBJSPEC
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RESPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RCPDEL = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
RCPID = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 36, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S15F35R
| S15F36 | Recipe Delete Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F36 Python Parse reply
rcr = sp.sendSecsMsg(15, 35, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F37R | DRNS Segment Approve Action Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F37R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 37, secs_receive_S15F37R)
def secs_receive_S15F37R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F37R.'''
ok = True
while ok: # break out of loop on error
# expect L:6 RMSEGSPEC OBJTOKEN RMGRNT OPID RCPID RMCHGTYPE
# RMSEGSPEC A:n (always) The object ID of a distributed recipe namespace segment
# OBJTOKEN U4:1 (always) token used for authorization
# RMGRNT B:1 (always) grant code, 0 ok
# OPID U4:1 (varies) operation identifier
# RCPID A:n (always) recipe identifier conforming to OBJSPEC
# RMCHGTYPE U4:1 (varies) type of change for a recipe
pylist0 = lsplit(TSN_data)
if len(pylist0) != 7 or pylist0[0] != "L:6":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMSEGSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
OBJTOKEN = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
RMGRNT = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeOPID, lengthOPID) = pylist1[0].split(':')
OPID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1:
ok = False
break
#(typeRMCHGTYPE, lengthRMCHGTYPE) = pylist1[0].split(':')
RMCHGTYPE = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 38, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F37R
| S15F38 | DRNS Segment Approve Action Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F38 Python Parse reply
rcr = sp.sendSecsMsg(15, 37, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F39R | DRNS Recorder Seg Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F39R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 39, secs_receive_S15F39R)
def secs_receive_S15F39R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F39R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 DATAID RMNSCMD RMRECSPEC RMSEGSPEC OBJTOKEN
# DATAID U4:1 (varies) an identifier to correlate related messages
# RMNSCMD U1:1 (always) recipe namespace command
# RMRECSPEC A:n (always) object id of a distributed recipe namespace recorder
# RMSEGSPEC A:n (always) The object ID of a distributed recipe namespace segment
# OBJTOKEN U4:1 (always) token used for authorization
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMNSCMD = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMRECSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMSEGSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
OBJTOKEN = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 40, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F39R
| S15F40 | DRNS Recorder Seg Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F40 Python Parse reply
rcr = sp.sendSecsMsg(15, 39, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F41R | DRNS Recorder Mod Req |
Sent by Host and Equipment |
Comment: L:c is L:7 or L:1, no explanation of L:1 item
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F41R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 41, secs_receive_S15F41R)
def secs_receive_S15F41R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F41R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 DATAID RMRECSPEC OBJTOKEN RMNSCMD {L:c RCPID RCPNEWID RMSEGSPEC RMCHGTYPE OPID TIMESTAMP RMREQUESTOR}
# DATAID U4:1 (varies) an identifier to correlate related messages
# RMRECSPEC A:n (always) object id of a distributed recipe namespace recorder
# OBJTOKEN U4:1 (always) token used for authorization
# RMNSCMD U1:1 (always) recipe namespace command
# RCPID A:n (always) recipe identifier conforming to OBJSPEC
# RCPNEWID A:n (always) the new recipe identifier
# RMSEGSPEC A:n (always) The object ID of a distributed recipe namespace segment
# RMCHGTYPE U4:1 (varies) type of change for a recipe
# OPID U4:1 (varies) operation identifier
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# RMREQUESTOR TF:1 (always) True when the initiator of a change request is an attached segment, otherwise false
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMRECSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
OBJTOKEN = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMNSCMD = int(pylist1[1])
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for c in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[c])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
RCPID = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[c])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
RCPNEWID = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[c])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
RMSEGSPEC = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[c])
if len(pylist2) < 1:
ok = False
break
#(typeRMCHGTYPE, lengthRMCHGTYPE) = pylist2[0].split(':')
RMCHGTYPE = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[c])
if len(pylist2) < 1:
ok = False
break
#(typeOPID, lengthOPID) = pylist2[0].split(':')
OPID = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[c])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[c])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
RMREQUESTOR = int(pylist2[1])
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 42, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F41R
| S15F42 | DRNS Recorder Mod Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F42 Python Parse reply
rcr = sp.sendSecsMsg(15, 41, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F43R | DRNS Get Change Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F43R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 43, secs_receive_S15F43R)
def secs_receive_S15F43R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F43R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 DATAID OBJSPEC TARGETSPEC
# DATAID U4:1 (varies) an identifier to correlate related messages
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# TARGETSPEC A:40 (always) Specifier of target object
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETSPEC = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 44, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F43R
| S15F44 | DRNS Get Change Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F44 Python Parse reply
rcr = sp.sendSecsMsg(15, 43, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:n {L:7 RCPID RCPNEWID RMSEGSPEC RMCHGTYPE OPID TIMESTAMP RMREQUESTOR}} {L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}}
# RCPID A:n (always) recipe identifier conforming to OBJSPEC
# RCPNEWID A:n (always) the new recipe identifier
# RMSEGSPEC A:n (always) The object ID of a distributed recipe namespace segment
# RMCHGTYPE U4:1 (varies) type of change for a recipe
# OPID U4:1 (varies) operation identifier
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# RMREQUESTOR TF:1 (always) True when the initiator of a change request is an attached segment, otherwise false
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 8 or pylist2[0] != "L:7":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPNEWID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RMSEGSPEC = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1:
ok = False
break
#(typeRMCHGTYPE, lengthRMCHGTYPE) = pylist3[0].split(':')
RMCHGTYPE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1:
ok = False
break
#(typeOPID, lengthOPID) = pylist3[0].split(':')
OPID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[7])
if len(pylist3) < 1 or pylist3[0] != "TF:1":
ok = False
break
RMREQUESTOR = int(pylist3[1])
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for p in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[p])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F45R | DRNS Mgr Seg Aprvl Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F45R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 45, secs_receive_S15F45R)
def secs_receive_S15F45R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F45R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 DATAID RCPSPEC RCPNEWID RMCHGTYPE
# DATAID U4:1 (varies) an identifier to correlate related messages
# RCPSPEC A:n (always) recipe specifier
# RCPNEWID A:n (always) the new recipe identifier
# RMCHGTYPE U4:1 (varies) type of change for a recipe
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPNEWID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeRMCHGTYPE, lengthRMCHGTYPE) = pylist1[0].split(':')
RMCHGTYPE = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 46, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F45R
| S15F46 | DRNS Mgr Seg Aprvl Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F46 Python Parse reply
rcr = sp.sendSecsMsg(15, 45, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 RMCHGTYPE RMGRNT OPID
# RMCHGTYPE U4:1 (varies) type of change for a recipe
# RMGRNT B:1 (always) grant code, 0 ok
# OPID U4:1 (varies) operation identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeRMCHGTYPE, lengthRMCHGTYPE) = pylist1[0].split(':')
RMCHGTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
RMGRNT = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeOPID, lengthOPID) = pylist1[0].split(':')
OPID = (pylist1[1] if len(pylist1) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S15F47R | DRNS Mgr Rebuild Req |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F47R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 47, secs_receive_S15F47R)
def secs_receive_S15F47R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F47R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 DATAID OBJSPEC RMNSSPEC RMRECSPEC {L:n RMSEGSPEC}
# DATAID U4:1 (varies) an identifier to correlate related messages
# OBJSPEC A:n (varies) E39 structured text identifying an object, [object type:object id>]+
# RMNSSPEC A:n (always) object id of a recipe namespace
# RMRECSPEC A:n (always) object id of a distributed recipe namespace recorder
# RMSEGSPEC A:n (always) The object ID of a distributed recipe namespace segment
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJSPEC, lengthOBJSPEC) = pylist1[0].split(':')
OBJSPEC = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMNSSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMRECSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
RMSEGSPEC = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 48, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F47R
| S15F48 | DRNS Mgr Rebuild Ack |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F48 Python Parse reply
rcr = sp.sendSecsMsg(15, 47, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RMACK {L:p {L:2 ERRCODE ERRTEXT}}
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RMACK = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S15F49R | Large Recipe Download Req |
Sent by Host Only |
Comment: The DSNAME is the RCPSPEC for Stream 13 transfer.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F49R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 49, secs_receive_S15F49R)
def secs_receive_S15F49R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F49R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 DSNAME RCPOWCODE
# DSNAME A:50 (varies) the name of a dataset such as a PPID
# RCPOWCODE TF:1 (always) recipe overwrite code, true=overwrite ok, false=do not overwrite
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDSNAME, lengthDSNAME) = pylist1[0].split(':')
DSNAME = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
RCPOWCODE = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 50, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S15F49R
| S15F50 | Large Recipe Download Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F50 Python Parse reply
rcr = sp.sendSecsMsg(15, 49, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC15
# ACKC15 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC15 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S15F51R | Large Recipe Upload Req |
Sent by Host Only |
Comment: The DSNAME is the RCPSPEC used in Stream 13.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F51R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 51, secs_receive_S15F51R)
def secs_receive_S15F51R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F51R.'''
ok = True
while ok: # break out of loop on error
# expect DSNAME
# DSNAME A:50 (varies) the name of a dataset such as a PPID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeDSNAME, lengthDSNAME) = pylist0[0].split(':')
DSNAME = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 52, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S15F51R
| S15F52 | Large Recipe Upload Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F52 Python Parse reply
rcr = sp.sendSecsMsg(15, 51, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKC15
# ACKC15 B:1 (always) acknowledge code, 0 ok
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
ACKC15 = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S15F53R | Recipe Verification Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F53R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 15, 53, secs_receive_S15F53R)
def secs_receive_S15F53R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S15F53R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 RCPSPEC RCPID {L:2 RMACK {L:n {L:2 ERRCODE ERRTEXT}}}
# RCPSPEC A:n (always) recipe specifier
# RCPID A:n (always) recipe identifier conforming to OBJSPEC
# RMACK U1:1 (always) recipe managment completion code
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RCPID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
RMACK = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 15, 54, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S15F53R
| S15F54 | Recipe Verification Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S15F54 Python Parse reply
rcr = sp.sendSecsMsg(15, 53, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# no data expected
return # finished ok
# end while(ok)
# end def
| S16F1R | Process Job Data MBI |
Sent by Host Only |
Comment: SECS-I multiblock inquire/grant for all process management messages, optional for HSMS
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 1, secs_receive_S16F1R)
def secs_receive_S16F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F1R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 DATAID DATALENGTH
# DATAID U4:1 (varies) an identifier to correlate related messages
# DATALENGTH U4:1 (varies) total bytes of the message body
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeDATALENGTH, lengthDATALENGTH) = pylist1[0].split(':')
DATALENGTH = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S16F1R
| S16F2 | PJD MBI Grant |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F2 Python Parse reply
rcr = sp.sendSecsMsg(16, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect GRANT
# GRANT B:1 (always) multiblock grant code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
GRANT = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S16F3R | Process Job Create Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 3, secs_receive_S16F3R)
def secs_receive_S16F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F3R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 DATAID MF {L:n MID} {L:3 PRRECIPEMETHOD RCPSPEC {L:m {L:2 RCPPARNM RCPPARVAL}}} PRPROCESSSTART
# DATAID U4:1 (varies) an identifier to correlate related messages
# MF B:1 (varies) material format code, ASCII indicates generic units, E40 restricts to B:1
# MID A:16 (varies) material ID, E40 restricts to A:n
# PRRECIPEMETHOD U1:1 (always) recipe type
# RCPSPEC A:n (always) recipe specifier
# RCPPARNM A:256 (always) the name of a recipe variable parameter
# RCPPARVAL A:80 (varies) the value of a recipe variable parameter, any scalar format type
# PRPROCESSSTART TF:1 (always) automatic start flag, false implies manual start
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMF, lengthMF) = pylist1[0].split(':')
MF = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist2[0].split(':')
MID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[4])
if len(pylist1) != 4 or pylist1[0] != "L:3":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
PRRECIPEMETHOD = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1:
ok = False
break
for m in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[m])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
RCPPARNM = (pylist4[1] if len(pylist4) == 2 else "")
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1:
ok = False
break
#(typeRCPPARVAL, lengthRCPPARVAL) = pylist4[0].split(':')
RCPPARVAL = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
PRPROCESSSTART = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S16F3R
| S16F4 | Process Job Create Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F4 Python Parse reply
rcr = sp.sendSecsMsg(16, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 PRJOBID {L:2 ACKA {L:n {L:2 ERRCODE ERRTEXT}}}
# PRJOBID A:n (always) process job identifier
# ACKA TF:1 (always) request success
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
ACKA = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S16F5R | Process Job Cmd Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 5, secs_receive_S16F5R)
def secs_receive_S16F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F5R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 DATAID PRJOBID PRCMDNAME {L:n {L:2 CPNAME CPVAL}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# PRJOBID A:n (always) process job identifier
# PRCMDNAME A:6 (always) process job commmands, START, STOP, PAUSE, RESUME, ABORT, CANCEL
# CPNAME A:n (varies) command parameter name
# CPVAL A:n (varies) command parameter value, any scalar type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRCMDNAME = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeCPNAME, lengthCPNAME) = pylist3[0].split(':')
CPNAME = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeCPVAL, lengthCPVAL) = pylist3[0].split(':')
CPVAL = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S16F5R
| S16F6 | Process Job Cmd Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F6 Python Parse reply
rcr = sp.sendSecsMsg(16, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 PRJOBID {L:2 ACKA {L:n {L:2 ERRCODE ERRTEXT}}}
# PRJOBID A:n (always) process job identifier
# ACKA TF:1 (always) request success
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
ACKA = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S16F7[R] | Process Job Alert Notify |
Sent by Equipment Only |
Comment: Unlike S5F1 there is no message to enable/disable selected alerts. ACKA false indicates failure.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F7 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 7, secs_receive_S16F7)
def secs_receive_S16F7(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F7.'''
ok = True
while ok: # break out of loop on error
# expect L:4 TIMESTAMP PRJOBID PRJOBMILESTONE {L:2 ACKA {L:n {L:2 ERRCODE ERRTEXT}}}
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# PRJOBID A:n (always) process job identifier
# PRJOBMILESTONE U1:1 (varies) process job status
# ACKA TF:1 (always) request success
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typePRJOBMILESTONE, lengthPRJOBMILESTONE) = pylist1[0].split(':')
PRJOBMILESTONE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
ACKA = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S16F7
| S16F8 | Process Job Alert Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F8 Python Parse reply
rcr = sp.sendSecsMsg(16, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# no data expected
return # finished ok
# end while(ok)
# end def
| S16F9[R] | Process Job Event Notify |
Sent by Equipment Only |
Comment: There is no message to define the VID list or enable/disable. Less featured than Stream 6 and superseded by Stream 17.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F9 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 9, secs_receive_S16F9)
def secs_receive_S16F9(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F9.'''
ok = True
while ok: # break out of loop on error
# expect L:4 PREVENTID TIMESTAMP PRJOBID {L:n {L:2 VID V}}
# PREVENTID U1:1 (varies) process job event ID
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# PRJOBID A:n (always) process job identifier
# VID A:n (varies) A variable ID
# V A:n (varies) variable value, any type including list
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typePREVENTID, lengthPREVENTID) = pylist1[0].split(':')
PREVENTID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist3[0].split(':')
VID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeV, lengthV) = pylist3[0].split(':')
V = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S16F9
| S16F10 | Process Job Event Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F10 Python Parse reply
rcr = sp.sendSecsMsg(16, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# no data expected
return # finished ok
# end while(ok)
# end def
| S16F11R | PRJobCreateEnh |
Sent by Host Only |
Comment: The L:n list can be {L:n MID} depending on MF, {L:j SLOTID} might be an array instead
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F11R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 11, secs_receive_S16F11R)
def secs_receive_S16F11R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F11R.'''
ok = True
while ok: # break out of loop on error
# expect L:7 DATAID PRJOBID MF {L:n {L:2 CARRIERID {L:j SLOTID}}} {L:3 PRRECIPEMETHOD RCPSPEC {L:m {L:2 RCPPARNM RCPPARVAL}}} PRPROCESSSTART {L:p PRPAUSEEVENTID}
# DATAID U4:1 (varies) an identifier to correlate related messages
# PRJOBID A:n (always) process job identifier
# MF B:1 (varies) material format code, ASCII indicates generic units, E40 restricts to B:1
# CARRIERID A:n (always) carrier ID
# SLOTID U1:1 (always) slot position within a carrier
# PRRECIPEMETHOD U1:1 (always) recipe type
# RCPSPEC A:n (always) recipe specifier
# RCPPARNM A:256 (always) the name of a recipe variable parameter
# RCPPARVAL A:80 (varies) the value of a recipe variable parameter, any scalar format type
# PRPROCESSSTART TF:1 (always) automatic start flag, false implies manual start
# PRPAUSEEVENTID U4:1 (varies) an event identifier for which a process job should be paused
pylist0 = lsplit(TSN_data)
if len(pylist0) != 8 or pylist0[0] != "L:7":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeMF, lengthMF) = pylist1[0].split(':')
MF = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
CARRIERID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for j in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[j])
if len(pylist4) < 1 or pylist4[0] != "U1:1":
ok = False
break
SLOTID = int(pylist4[1])
if not ok: break
if not ok: break
pylist1 = lsplit(pylist0[5])
if len(pylist1) != 4 or pylist1[0] != "L:3":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
PRRECIPEMETHOD = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1:
ok = False
break
for m in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[m])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
RCPPARNM = (pylist4[1] if len(pylist4) == 2 else "")
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1:
ok = False
break
#(typeRCPPARVAL, lengthRCPPARVAL) = pylist4[0].split(':')
RCPPARVAL = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
PRPROCESSSTART = int(pylist1[1])
pylist1 = lsplit(pylist0[7])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) < 1:
ok = False
break
#(typePRPAUSEEVENTID, lengthPRPAUSEEVENTID) = pylist2[0].split(':')
PRPAUSEEVENTID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S16F11R
| S16F12 | PRJobCreateEnh Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F12 Python Parse reply
rcr = sp.sendSecsMsg(16, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 PRJOBID {L:2 ACKA {L:n {L:2 ERRCODE ERRTEXT}}}
# PRJOBID A:n (always) process job identifier
# ACKA TF:1 (always) request success
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
ACKA = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S16F15R | PRJobMultiCreate |
Sent by Host Only |
Comment: The L:n list can be {L:n MID} depending on MF, {L:j SLOTID} might be an array instead
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 15, secs_receive_S16F15R)
def secs_receive_S16F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F15R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 DATAID {L:p {L:6 PRJOBID MF {L:n {L:2 CARRIERID {L:j SLOTID}}} {L:3 PRRECIPEMETHOD RCPSPEC {L:m {L:2 RCPPARNM RCPPARVAL}}} PRPROCESSSTART {L:k PRPAUSEEVENTID}}}
# DATAID U4:1 (varies) an identifier to correlate related messages
# PRJOBID A:n (always) process job identifier
# MF B:1 (varies) material format code, ASCII indicates generic units, E40 restricts to B:1
# CARRIERID A:n (always) carrier ID
# SLOTID U1:1 (always) slot position within a carrier
# PRRECIPEMETHOD U1:1 (always) recipe type
# RCPSPEC A:n (always) recipe specifier
# RCPPARNM A:256 (always) the name of a recipe variable parameter
# RCPPARVAL A:80 (varies) the value of a recipe variable parameter, any scalar format type
# PRPROCESSSTART TF:1 (always) automatic start flag, false implies manual start
# PRPAUSEEVENTID U4:1 (varies) an event identifier for which a process job should be paused
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for p in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[p])
if len(pylist2) != 7 or pylist2[0] != "L:6":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeMF, lengthMF) = pylist3[0].split(':')
MF = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1:
ok = False
break
for n in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[n])
if len(pylist4) != 3 or pylist4[0] != "L:2":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1 or not pylist5[0].startswith("A:"):
ok = False
break
CARRIERID = (pylist5[1] if len(pylist5) == 2 else "")
pylist5 = lsplit(pylist4[2])
if len(pylist5) < 1:
ok = False
break
for j in range(1, len(pylist5)):
pylist6 = lsplit(pylist5[j])
if len(pylist6) < 1 or pylist6[0] != "U1:1":
ok = False
break
SLOTID = int(pylist6[1])
if not ok: break
if not ok: break
pylist3 = lsplit(pylist2[4])
if len(pylist3) != 4 or pylist3[0] != "L:3":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1 or pylist4[0] != "U1:1":
ok = False
break
PRRECIPEMETHOD = int(pylist4[1])
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
RCPSPEC = (pylist4[1] if len(pylist4) == 2 else "")
pylist4 = lsplit(pylist3[3])
if len(pylist4) < 1:
ok = False
break
for m in range(1, len(pylist4)):
pylist5 = lsplit(pylist4[m])
if len(pylist5) != 3 or pylist5[0] != "L:2":
ok = False
break
pylist6 = lsplit(pylist5[1])
if len(pylist6) < 1 or not pylist6[0].startswith("A:"):
ok = False
break
RCPPARNM = (pylist6[1] if len(pylist6) == 2 else "")
pylist6 = lsplit(pylist5[2])
if len(pylist6) < 1:
ok = False
break
#(typeRCPPARVAL, lengthRCPPARVAL) = pylist6[0].split(':')
RCPPARVAL = (pylist6[1] if len(pylist6) == 2 else None)
if not ok: break
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1 or pylist3[0] != "TF:1":
ok = False
break
PRPROCESSSTART = int(pylist3[1])
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1:
ok = False
break
for k in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[k])
if len(pylist4) < 1:
ok = False
break
#(typePRPAUSEEVENTID, lengthPRPAUSEEVENTID) = pylist4[0].split(':')
PRPAUSEEVENTID = (pylist4[1] if len(pylist4) == 2 else None)
if not ok: break
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S16F15R
| S16F16 | PRJobMultiCreate Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F16 Python Parse reply
rcr = sp.sendSecsMsg(16, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:m PRJOBID} {L:2 ACKA {L:n {L:2 ERRCODE ERRTEXT}}}
# PRJOBID A:n (always) process job identifier
# ACKA TF:1 (always) request success
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
ACKA = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S16F17R | PRJobDequeue |
Sent by Host Only |
Comment: If m = 0 then the request is for all jobs that have not begun processing.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 17, secs_receive_S16F17R)
def secs_receive_S16F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F17R.'''
ok = True
while ok: # break out of loop on error
# expect L:m PRJOBID
# PRJOBID A:n (always) process job identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for m in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[m])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S16F17R
| S16F18 | PRJobDequeue Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F18 Python Parse reply
rcr = sp.sendSecsMsg(16, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:m PRJOBID} {L:2 ACKA {L:n {L:2 ERRCODE ERRTEXT}}}
# PRJOBID A:n (always) process job identifier
# ACKA TF:1 (always) request success
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
ACKA = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S16F19R | PRJob List Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F19R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 19, secs_receive_S16F19R)
def secs_receive_S16F19R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F19R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S16F19R
| S16F20 | PRJob List Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F20 Python Parse reply
rcr = sp.sendSecsMsg(16, 19, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:m {L:2 PRJOBID PRSTATE}
# PRJOBID A:n (always) process job identifier
# PRSTATE U1:1 (always) process job state, E40 definition
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for m in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[m])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
PRSTATE = int(pylist2[1])
if not ok: break
return # finished ok
# end while(ok)
# end def
| S16F21R | PRJob Create Limit Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F21R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 21, secs_receive_S16F21R)
def secs_receive_S16F21R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F21R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 22, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S16F21R
| S16F22 | PRJob Create Limit Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F22 Python Parse reply
rcr = sp.sendSecsMsg(16, 21, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect PRJOBSPACE
# PRJOBSPACE U2:1 (always) the number of process jobs that can be created
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U2:1":
ok = False
break
PRJOBSPACE = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S16F23R | PRJob Recipe Variable Set |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F23R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 23, secs_receive_S16F23R)
def secs_receive_S16F23R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F23R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 PRJOBID {L:m {L:2 RCPPARNM RCPPARVAL}}
# PRJOBID A:n (always) process job identifier
# RCPPARNM A:256 (always) the name of a recipe variable parameter
# RCPPARVAL A:80 (varies) the value of a recipe variable parameter, any scalar format type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RCPPARNM = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeRCPPARVAL, lengthRCPPARVAL) = pylist3[0].split(':')
RCPPARVAL = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 24, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S16F23R
| S16F24 | PRJob Recipe Variable Ack |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F24 Python Parse reply
rcr = sp.sendSecsMsg(16, 23, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 ACKA {L:n {L:2 ERRCODE ERRTEXT}}
# ACKA TF:1 (always) request success
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
ACKA = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S16F25R | PRJob Start Method Set |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F25R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 25, secs_receive_S16F25R)
def secs_receive_S16F25R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F25R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 {L:m PRJOBID} PRPROCESSSTART
# PRJOBID A:n (always) process job identifier
# PRPROCESSSTART TF:1 (always) automatic start flag, false implies manual start
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
PRPROCESSSTART = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 26, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S16F25R
| S16F26 | PRJob Start Method Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F26 Python Parse reply
rcr = sp.sendSecsMsg(16, 25, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:m PRJOBID} {L:2 ACKA {L:n {L:2 ERRCODE ERRTEXT}}}
# PRJOBID A:n (always) process job identifier
# ACKA TF:1 (always) request success
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
ACKA = int(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
for n in range(1, len(pylist2)):
pylist3 = lsplit(pylist2[n])
if len(pylist3) != 3 or pylist3[0] != "L:2":
ok = False
break
pylist4 = lsplit(pylist3[1])
if len(pylist4) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist4[0].split(':')
ERRCODE = (pylist4[1] if len(pylist4) == 2 else None)
pylist4 = lsplit(pylist3[2])
if len(pylist4) < 1 or not pylist4[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist4[1] if len(pylist4) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S16F27R | Control Job Command |
Sent by Host Only |
Comment: Defined by E94, used in replacement of S16F5 when Control Jobs are used
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F27R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 27, secs_receive_S16F27R)
def secs_receive_S16F27R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F27R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 CTLJOBID CTLJOBCMD {L:2 CPNAME CPVAL}
# CTLJOBID A:n (always) control job ID, an OBJID
# CTLJOBCMD U1:1 (always) control job command
# CPNAME A:n (varies) command parameter name
# CPVAL A:n (varies) command parameter value, any scalar type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
CTLJOBID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
CTLJOBCMD = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeCPNAME, lengthCPNAME) = pylist2[0].split(':')
CPNAME = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
#(typeCPVAL, lengthCPVAL) = pylist2[0].split(':')
CPVAL = (pylist2[1] if len(pylist2) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 28, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S16F27R
| S16F28 | Control Job Command Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F28 Python Parse reply
rcr = sp.sendSecsMsg(16, 27, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 ACKA {L:2 ERRCODE ERRTEXT}
# ACKA TF:1 (always) request success
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
ACKA = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) != 3 or pylist1[0] != "L:2":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist2[0].split(':')
ERRCODE = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist2[1] if len(pylist2) == 2 else "")
return # finished ok
# end while(ok)
# end def
| S16F29 | PRSetMtrlOrder |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F29 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 16, 29, secs_receive_S16F29)
def secs_receive_S16F29(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S16F29.'''
ok = True
while ok: # break out of loop on error
# expect PRMTRLORDER
# PRMTRLORDER U1:1 (always) ordering method for pending process jobs
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
PRMTRLORDER = int(pylist0[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 16, 30, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S16F29
| S16F30 | PRSetMtrlOrder Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S16F30 Python Parse reply
rcr = sp.sendSecsMsg(16, 29, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect ACKA
# ACKA TF:1 (always) request success
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "TF:1":
ok = False
break
ACKA = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S17F1R | Data Report Create Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 17, 1, secs_receive_S17F1R)
def secs_receive_S17F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S17F1R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 DATAID RPTID DATASRC {L:n VID}
# DATAID U4:1 (varies) an identifier to correlate related messages
# RPTID U4:1 (varies) report ID
# DATASRC A:n (always) identifies a data source, use length 0 to mean the default
# VID A:n (varies) A variable ID
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist1[0].split(':')
RPTID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
DATASRC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeVID, lengthVID) = pylist2[0].split(':')
VID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 17, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S17F1R
| S17F2 | Data Report Create Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F2 Python Parse reply
rcr = sp.sendSecsMsg(17, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 RPTID ERRCODE
# RPTID U4:1 (varies) report ID
# ERRCODE U4:1 (varies) error code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist1[0].split(':')
RPTID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist1[0].split(':')
ERRCODE = (pylist1[1] if len(pylist1) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S17F3R | Data Report Delete Req |
Sent by Host Only |
Comment: L:0 means delete all reports
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 17, 3, secs_receive_S17F3R)
def secs_receive_S17F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S17F3R.'''
ok = True
while ok: # break out of loop on error
# expect L:n RPTID
# RPTID U4:1 (varies) report ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist1[0].split(':')
RPTID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 17, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S17F3R
| S17F4 | Data Report Del Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F4 Python Parse reply
rcr = sp.sendSecsMsg(17, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 ACKA {L:m {L:3 RPTID ERRCODE ERRTEXT}}
# ACKA TF:1 (always) request success
# RPTID U4:1 (varies) report ID
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
ACKA = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist3[0].split(':')
RPTID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S17F5R | Trace Create Req |
Sent by Host Only |
Comment: we recommend the host always provides the L:8 values
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 17, 5, secs_receive_S17F5R)
def secs_receive_S17F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S17F5R.'''
ok = True
while ok: # break out of loop on error
# expect L:6 DATAID TRID CEED {L:n RPTID} {L:8* TOTSMP REPGSZ EVNTSRC CEIDSTART EVNTSRC2 CEIDSTOP TRAUTOD RPTOC}
# DATAID U4:1 (varies) an identifier to correlate related messages
# TRID A:n (varies) trace request ID
# CEED TF:1 (always) collection event or trace enablement, true is enabled
# RPTID U4:1 (varies) report ID
# TOTSMP U4:1 (varies) total samples to be made, should be an even multiple of REPGSZ
# REPGSZ U4:1 (varies) reporting group size, TOTSMP modulo REPGSZ should be 0
# EVNTSRC A:n (always) identifies an event source, use length 0 to specify the default
# CEIDSTART U4:1 (varies) the CEID of a start event
# EVNTSRC2 A:n (always) a second event source EVNTSRC
# CEIDSTOP U4:1 (varies) the CEID of a stop event
# TRAUTOD TF:1 (always) delete upon completion flag
# RPTOC TF:1 (always) send only changed data trace report flag
pylist0 = lsplit(TSN_data)
if len(pylist0) != 7 or pylist0[0] != "L:6":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist1[0].split(':')
TRID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
CEED = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist2[0].split(':')
RPTID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[5])
if len(pylist1) == 9: # 8 optional items found
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1:
ok = False
break
#(typeTOTSMP, lengthTOTSMP) = pylist2[0].split(':')
TOTSMP = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1:
ok = False
break
#(typeREPGSZ, lengthREPGSZ) = pylist2[0].split(':')
REPGSZ = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
EVNTSRC = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[4])
if len(pylist2) < 1:
ok = False
break
#(typeCEIDSTART, lengthCEIDSTART) = pylist2[0].split(':')
CEIDSTART = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[5])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
EVNTSRC2 = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[6])
if len(pylist2) < 1:
ok = False
break
#(typeCEIDSTOP, lengthCEIDSTOP) = pylist2[0].split(':')
CEIDSTOP = (pylist2[1] if len(pylist2) == 2 else None)
pylist2 = lsplit(pylist1[7])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
TRAUTOD = int(pylist2[1])
pylist2 = lsplit(pylist1[8])
if len(pylist2) < 1 or pylist2[0] != "TF:1":
ok = False
break
RPTOC = int(pylist2[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 17, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S17F5R
| S17F6 | Trace Create Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F6 Python Parse reply
rcr = sp.sendSecsMsg(17, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 TRID ERRCODE
# TRID A:n (varies) trace request ID
# ERRCODE U4:1 (varies) error code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist1[0].split(':')
TRID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist1[0].split(':')
ERRCODE = (pylist1[1] if len(pylist1) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S17F7R | Trace Delete Req |
Sent by Host Only |
Comment: Surprisingly, L:0 is not specified as a means to indicate all, but this feature has to be provided because there is no means to discover the existing traces.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F7R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 17, 7, secs_receive_S17F7R)
def secs_receive_S17F7R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S17F7R.'''
ok = True
while ok: # break out of loop on error
# expect L:n TRID
# TRID A:n (varies) trace request ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist1[0].split(':')
TRID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 17, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S17F7R
| S17F8 | Trace Delete Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F8 Python Parse reply
rcr = sp.sendSecsMsg(17, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 ACKA {L:m {L:3 TRID ERRCODE ERRTEXT}}
# ACKA TF:1 (always) request success
# TRID A:n (varies) trace request ID
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
ACKA = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist3[0].split(':')
TRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S17F9R | Collection Event Link Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F9R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 17, 9, secs_receive_S17F9R)
def secs_receive_S17F9R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S17F9R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 DATAID EVNTSRC CEID {L:n RPTID}
# DATAID U4:1 (varies) an identifier to correlate related messages
# EVNTSRC A:n (always) identifies an event source, use length 0 to specify the default
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# RPTID U4:1 (varies) report ID
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeDATAID, lengthDATAID) = pylist1[0].split(':')
DATAID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EVNTSRC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist2[0].split(':')
RPTID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 17, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S17F9R
| S17F10 | Collection Event Link Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F10 Python Parse reply
rcr = sp.sendSecsMsg(17, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 EVNTSRC CEID ERRCODE
# EVNTSRC A:n (always) identifies an event source, use length 0 to specify the default
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# ERRCODE U4:1 (varies) error code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EVNTSRC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist1[0].split(':')
ERRCODE = (pylist1[1] if len(pylist1) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S17F11R | Collection Event Unlink |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F11R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 17, 11, secs_receive_S17F11R)
def secs_receive_S17F11R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S17F11R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 EVNTSRC CEID RPTID
# EVNTSRC A:n (always) identifies an event source, use length 0 to specify the default
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# RPTID U4:1 (varies) report ID
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EVNTSRC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist1[0].split(':')
RPTID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 17, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S17F11R
| S17F12 | Collection Event Unlink Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F12 Python Parse reply
rcr = sp.sendSecsMsg(17, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:4 EVNTSRC CEID RPTID ERRCODE
# EVNTSRC A:n (always) identifies an event source, use length 0 to specify the default
# CEID U4:1 (varies) collection event identifier, GEM requires type Un
# RPTID U4:1 (varies) report ID
# ERRCODE U4:1 (varies) error code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EVNTSRC = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeCEID, lengthCEID) = pylist1[0].split(':')
CEID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeRPTID, lengthRPTID) = pylist1[0].split(':')
RPTID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist1[0].split(':')
ERRCODE = (pylist1[1] if len(pylist1) == 2 else None)
return # finished ok
# end while(ok)
# end def
| S17F13R | Trace Reset Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 17, 13, secs_receive_S17F13R)
def secs_receive_S17F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S17F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:n TRID
# TRID A:n (varies) trace request ID
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist1[0].split(':')
TRID = (pylist1[1] if len(pylist1) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 17, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S17F13R
| S17F14 | Trace Reset Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S17F14 Python Parse reply
rcr = sp.sendSecsMsg(17, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 ACKA {L:m {L:3 TRID ERRCODE ERRTEXT}}
# ACKA TF:1 (always) request success
# TRID A:n (varies) trace request ID
# ERRCODE U4:1 (varies) error code
# ERRTEXT A:80 (always) description of ERRCODE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
ACKA = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeTRID, lengthTRID) = pylist3[0].split(':')
TRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeERRCODE, lengthERRCODE) = pylist3[0].split(':')
ERRCODE = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ERRTEXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S18F1R | Read Attribute Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 18, 1, secs_receive_S18F1R)
def secs_receive_S18F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S18F1R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 TARGETID {L:n ATTRID}
# TARGETID A:n (always) the OBJSPEC for the target object
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist2[0].split(':')
ATTRID = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 18, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S18F1R
| S18F2 | Read Attribute Data |
Sent by Equipment Only |
Comment: E5 differs from OEM tools
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F2 Python Parse reply
rcr = sp.sendSecsMsg(18, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:4 TARGETID SSACK {L:n ATTRDATA} {L:s STATUS}
# TARGETID A:n (always) the OBJSPEC for the target object
# SSACK A:2 (always) two character codes for success or failure, NO Normal, EE exec. err, CE comm. err, HE h/w err, TE tag err
# ATTRDATA A:n (varies) a specific attribute value of any data type
# STATUS A:n (always) subsystem status data
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SSACK = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist2[0].split(':')
ATTRDATA = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for s in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[s])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
STATUS = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S18F3R | Write Attribute Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 18, 3, secs_receive_S18F3R)
def secs_receive_S18F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S18F3R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 TARGETID {L:n {L:2 ATTRID ATTRDATA}}
# TARGETID A:n (always) the OBJSPEC for the target object
# ATTRID A:40 (varies) identifies an attribute type, chars 0x20-0x7e but not >, :, ?, *, or ~. Does not begin or end with space.
# ATTRDATA A:n (varies) a specific attribute value of any data type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1:
ok = False
break
#(typeATTRID, lengthATTRID) = pylist3[0].split(':')
ATTRID = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeATTRDATA, lengthATTRDATA) = pylist3[0].split(':')
ATTRDATA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 18, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S18F3R
| S18F4 | Write Attribute Ack |
Sent by Equipment Only |
Comment: fixed E5 mistake
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F4 Python Parse reply
rcr = sp.sendSecsMsg(18, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 TARGETID SSACK {L:s STATUS}
# TARGETID A:n (always) the OBJSPEC for the target object
# SSACK A:2 (always) two character codes for success or failure, NO Normal, EE exec. err, CE comm. err, HE h/w err, TE tag err
# STATUS A:n (always) subsystem status data
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SSACK = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for s in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[s])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
STATUS = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S18F5R | Read Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 18, 5, secs_receive_S18F5R)
def secs_receive_S18F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S18F5R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 TARGETID DATASEG DATALENGTH
# TARGETID A:n (always) the OBJSPEC for the target object
# DATASEG A:n (varies) identifies data requested, E87 requires text
# DATALENGTH U4:1 (varies) total bytes of the message body
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeDATASEG, lengthDATASEG) = pylist1[0].split(':')
DATASEG = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeDATALENGTH, lengthDATALENGTH) = pylist1[0].split(':')
DATALENGTH = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 18, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S18F5R
| S18F6 | Read Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F6 Python Parse reply
rcr = sp.sendSecsMsg(18, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:4 TARGETID SSACK DATA {L:s STATUS}
# TARGETID A:n (always) the OBJSPEC for the target object
# SSACK A:2 (always) two character codes for success or failure, NO Normal, EE exec. err, CE comm. err, HE h/w err, TE tag err
# DATA A:n (varies) unformatted data
# STATUS A:n (always) subsystem status data
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SSACK = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeDATA, lengthDATA) = pylist1[0].split(':')
DATA = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for s in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[s])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
STATUS = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S18F7R | Write Data Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F7R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 18, 7, secs_receive_S18F7R)
def secs_receive_S18F7R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S18F7R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 TARGETID DATASEG DATALENGTH DATA
# TARGETID A:n (always) the OBJSPEC for the target object
# DATASEG A:n (varies) identifies data requested, E87 requires text
# DATALENGTH U4:1 (varies) total bytes of the message body
# DATA A:n (varies) unformatted data
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeDATASEG, lengthDATASEG) = pylist1[0].split(':')
DATASEG = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeDATALENGTH, lengthDATALENGTH) = pylist1[0].split(':')
DATALENGTH = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
#(typeDATA, lengthDATA) = pylist1[0].split(':')
DATA = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 18, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S18F7R
| S18F8 | Write Data Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F8 Python Parse reply
rcr = sp.sendSecsMsg(18, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 TARGETID SSACK {L:s STATUS}
# TARGETID A:n (always) the OBJSPEC for the target object
# SSACK A:2 (always) two character codes for success or failure, NO Normal, EE exec. err, CE comm. err, HE h/w err, TE tag err
# STATUS A:n (always) subsystem status data
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SSACK = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for s in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[s])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
STATUS = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S18F9R | Read ID Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F9R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 18, 9, secs_receive_S18F9R)
def secs_receive_S18F9R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S18F9R.'''
ok = True
while ok: # break out of loop on error
# expect TARGETID
# TARGETID A:n (always) the OBJSPEC for the target object
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("A:"):
ok = False
break
TARGETID = (pylist0[1] if len(pylist0) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 18, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S18F9R
| S18F10 | Read ID Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F10 Python Parse reply
rcr = sp.sendSecsMsg(18, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:4 TARGETID SSACK MID {L:s STATUS}
# TARGETID A:n (always) the OBJSPEC for the target object
# SSACK A:2 (always) two character codes for success or failure, NO Normal, EE exec. err, CE comm. err, HE h/w err, TE tag err
# MID A:16 (varies) material ID, E40 restricts to A:n
# STATUS A:n (always) subsystem status data
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SSACK = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for s in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[s])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
STATUS = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S18F11R | Write ID Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F11R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 18, 11, secs_receive_S18F11R)
def secs_receive_S18F11R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S18F11R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 TARGETID MID
# TARGETID A:n (always) the OBJSPEC for the target object
# MID A:16 (varies) material ID, E40 restricts to A:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 18, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S18F11R
| S18F12 | Write ID Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F12 Python Parse reply
rcr = sp.sendSecsMsg(18, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 TARGETID SSACK {L:s STATUS}
# TARGETID A:n (always) the OBJSPEC for the target object
# SSACK A:2 (always) two character codes for success or failure, NO Normal, EE exec. err, CE comm. err, HE h/w err, TE tag err
# STATUS A:n (always) subsystem status data
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SSACK = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for s in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[s])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
STATUS = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S18F13R | Subsystem Command |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 18, 13, secs_receive_S18F13R)
def secs_receive_S18F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S18F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 TARGETID SSCMD {L:n CPVAL}
# TARGETID A:n (always) the OBJSPEC for the target object
# SSCMD A:n (always) subsystem action command
# CPVAL A:n (varies) command parameter value, any scalar type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SSCMD = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeCPVAL, lengthCPVAL) = pylist2[0].split(':')
CPVAL = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 18, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S18F13R
| S18F14 | Subsystem Command Ack |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F14 Python Parse reply
rcr = sp.sendSecsMsg(18, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 TARGETID SSACK {L:s STATUS}
# TARGETID A:n (always) the OBJSPEC for the target object
# SSACK A:2 (always) two character codes for success or failure, NO Normal, EE exec. err, CE comm. err, HE h/w err, TE tag err
# STATUS A:n (always) subsystem status data
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SSACK = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for s in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[s])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
STATUS = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S18F15R | Read 2D Code Cond Req |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 18, 15, secs_receive_S18F15R)
def secs_receive_S18F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S18F15R.'''
ok = True
while ok: # break out of loop on error
# expect TARGETID
# TARGETID A:n (always) the OBJSPEC for the target object
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("A:"):
ok = False
break
TARGETID = (pylist0[1] if len(pylist0) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 18, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S18F15R
| S18F16 | Read 2D Code Cond Data |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S18F16 Python Parse reply
rcr = sp.sendSecsMsg(18, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:5 TARGETID SSACK MID {L:s STATUS} {L:c CONDITION}
# TARGETID A:n (always) the OBJSPEC for the target object
# SSACK A:2 (always) two character codes for success or failure, NO Normal, EE exec. err, CE comm. err, HE h/w err, TE tag err
# MID A:16 (varies) material ID, E40 restricts to A:n
# STATUS A:n (always) subsystem status data
# CONDITION A:n (always) sub-system condition info tag
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
SSACK = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeMID, lengthMID) = pylist1[0].split(':')
MID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for s in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[s])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
STATUS = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for c in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[c])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
CONDITION = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S19F1R | Request Process Definition Element (PDE) Directory |
Sent by Host and Equipment |
Comment: SEE SEMI E139. If m=0, all PDE's are returned. If n=0, no additional attributes are returned. Selection conditions are ANDed together.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 19, 1, secs_receive_S19F1R)
def secs_receive_S19F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S19F1R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 {L:m {L:3 PDEATTRIBUTENAME COMPARISONOPERATOR PDEATTRIBUTEVALUE}} {L:n PDEATTRIBUTE}
# PDEATTRIBUTENAME U1:1 (always) identifies a PDE attribute type
# COMPARISONOPERATOR U1:1 (always) choice of comparison operators. Interpreted as "target <op> <const>" where <op> is this value and <const> is supplied in the expression
# PDEATTRIBUTEVALUE A (varies) contains the value of a PDE Attribute, may be type L, A, TF, U1
# PDEATTRIBUTE U1:1 (always) a reportable PDE attribute type, not necessarily useable in a filter expression
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
PDEATTRIBUTENAME = int(pylist3[1])
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
COMPARISONOPERATOR = int(pylist3[1])
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1:
ok = False
break
#(typePDEATTRIBUTEVALUE, lengthPDEATTRIBUTEVALUE) = pylist3[0].split(':')
PDEATTRIBUTEVALUE = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
PDEATTRIBUTE = int(pylist2[1])
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 19, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S19F1R
| S19F2 | PDE Directory Data |
Sent by Host and Equipment |
Comment: the list of PDEs, and their attributes matching the request
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F2 Python Parse reply
rcr = sp.sendSecsMsg(19, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 DIRRSPSTAT STATUSTXT {L:m {L:2 UID {L:n {L:2 PDEATTRIBUTE PDEATTRIBUTEVALUE}}}}
# DIRRSPSTAT U1:1 (always) get dir status response
# STATUSTXT A:80 (always) status response description
# UID A:36 (always) See SEMI E139. A unique identifier for a PDE consisting of a 36 character string with runs of 8, 4, 4, 4, and 12 characters separated by hyphens
# PDEATTRIBUTE U1:1 (always) a reportable PDE attribute type, not necessarily useable in a filter expression
# PDEATTRIBUTEVALUE A (varies) contains the value of a PDE Attribute, may be type L, A, TF, U1
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
DIRRSPSTAT = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
STATUSTXT = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
UID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
for n in range(1, len(pylist3)):
pylist4 = lsplit(pylist3[n])
if len(pylist4) != 3 or pylist4[0] != "L:2":
ok = False
break
pylist5 = lsplit(pylist4[1])
if len(pylist5) < 1 or pylist5[0] != "U1:1":
ok = False
break
PDEATTRIBUTE = int(pylist5[1])
pylist5 = lsplit(pylist4[2])
if len(pylist5) < 1:
ok = False
break
#(typePDEATTRIBUTEVALUE, lengthPDEATTRIBUTEVALUE) = pylist5[0].split(':')
PDEATTRIBUTEVALUE = (pylist5[1] if len(pylist5) == 2 else None)
if not ok: break
if not ok: break
return # finished ok
# end while(ok)
# end def
| S19F3R | PDE Delete Request |
Sent by Host Only |
Comment: L:0 is not allowed. Surprisingly the command is only defined for the host despite S19F1R being for both.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 19, 3, secs_receive_S19F3R)
def secs_receive_S19F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S19F3R.'''
ok = True
while ok: # break out of loop on error
# expect L:n UID
# UID A:36 (always) See SEMI E139. A unique identifier for a PDE consisting of a 36 character string with runs of 8, 4, 4, 4, and 12 characters separated by hyphens
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
UID = (pylist1[1] if len(pylist1) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 19, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S19F3R
| S19F4 | PDE Delete Acknowledge |
Sent by Equipment Only |
Comment: Surprisingly L:0 is specified as the reply for L:0 input instead of S9F7.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F4 Python Parse reply
rcr = sp.sendSecsMsg(19, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:3 UID DELRSPSTAT STATUSTXT}
# UID A:36 (always) See SEMI E139. A unique identifier for a PDE consisting of a 36 character string with runs of 8, 4, 4, 4, and 12 characters separated by hyphens
# DELRSPSTAT U1:1 (always) Response code for the PDE deletion request, non-zero means not deleted
# STATUSTXT A:80 (always) status response description
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 4 or pylist1[0] != "L:3":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
UID = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
DELRSPSTAT = int(pylist2[1])
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
STATUSTXT = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S19F5R | PDE Header Data Request |
Sent by Host and Equipment |
Comment: n = 0 is not allowed
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 19, 5, secs_receive_S19F5R)
def secs_receive_S19F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S19F5R.'''
ok = True
while ok: # break out of loop on error
# expect L:n UID
# UID A:36 (always) See SEMI E139. A unique identifier for a PDE consisting of a 36 character string with runs of 8, 4, 4, 4, and 12 characters separated by hyphens
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
UID = (pylist1[1] if len(pylist1) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 19, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S19F5R
| S19F6 | PDE Header Data Reply |
Sent by Host and Equipment |
Comment: A zero length TCID is sent if there are no code 0 PDEs. If L:0 S19F5R input then n=0 reply instead of S9F7!
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F6 Python Parse reply
rcr = sp.sendSecsMsg(19, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 TCID {L:n {L:3 UID GETRSPSTAT STATUSTXT}}
# TCID A:36 (always) The identity of a transfer container specified as a 36 character string with runs of 8, 4, 4, 4, and 12 characters joined by hyphens
# UID A:36 (always) See SEMI E139. A unique identifier for a PDE consisting of a 36 character string with runs of 8, 4, 4, 4, and 12 characters separated by hyphens
# GETRSPSTAT U1:1 (always) Response code for PDE queries, non-zero indicates failure
# STATUSTXT A:80 (always) status response description
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TCID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
UID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
GETRSPSTAT = int(pylist3[1])
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
STATUSTXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S19F7R | request the transfer of PDEs via Stream 13 |
Sent by Host and Equipment |
Comment: n = 0 is not allowed
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F7R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 19, 7, secs_receive_S19F7R)
def secs_receive_S19F7R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S19F7R.'''
ok = True
while ok: # break out of loop on error
# expect L:n UID
# UID A:36 (always) See SEMI E139. A unique identifier for a PDE consisting of a 36 character string with runs of 8, 4, 4, 4, and 12 characters separated by hyphens
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
UID = (pylist1[1] if len(pylist1) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 19, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S19F7R
| S19F8 | PDE Transfer Reply |
Sent by Host and Equipment |
Comment: Each PDE data set with the GETRSPSTAT response code of 0 will be sent in a Stream 13 TransferContainer. A zero length TCID is sent if there are no code 0 PDEs. If L:0 S19F7R input then n=0 reply instead of S9F7!
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F8 Python Parse reply
rcr = sp.sendSecsMsg(19, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 TCID {L:n {L:3 UID GETRSPSTAT STATUSTXT}}
# TCID A:36 (always) The identity of a transfer container specified as a 36 character string with runs of 8, 4, 4, 4, and 12 characters joined by hyphens
# UID A:36 (always) See SEMI E139. A unique identifier for a PDE consisting of a 36 character string with runs of 8, 4, 4, 4, and 12 characters separated by hyphens
# GETRSPSTAT U1:1 (always) Response code for PDE queries, non-zero indicates failure
# STATUSTXT A:80 (always) status response description
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TCID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
UID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
GETRSPSTAT = int(pylist3[1])
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
STATUSTXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S19F9R | Request to Send PDE |
Sent by Host and Equipment |
Comment: Request permission to initiate PDE transfer using S19F11R.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F9R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 19, 9, secs_receive_S19F9R)
def secs_receive_S19F9R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S19F9R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 TCID TRANSFERSIZE
# TCID A:36 (always) The identity of a transfer container specified as a 36 character string with runs of 8, 4, 4, 4, and 12 characters joined by hyphens
# TRANSFERSIZE U8:1 (always) SIze in bytes of the TransferContainer. An 8 byte value but HSMS uses 4 byte message lengths!!!
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TCID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U8:1":
ok = False
break
TRANSFERSIZE = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 19, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S19F9R
| S19F10 | Initiate PDE transfer Reply |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F10 Python Parse reply
rcr = sp.sendSecsMsg(19, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 TCID RTSRSPSTAT STATUSTXT
# TCID A:36 (always) The identity of a transfer container specified as a 36 character string with runs of 8, 4, 4, 4, and 12 characters joined by hyphens
# RTSRSPSTAT U1:1 (always) PDE transfer request reply code, non-zero means denied
# STATUSTXT A:80 (always) status response description
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TCID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RTSRSPSTAT = int(pylist1[1])
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
STATUSTXT = (pylist1[1] if len(pylist1) == 2 else "")
return # finished ok
# end while(ok)
# end def
| S19F11R | Send PDE |
Sent by Host and Equipment |
Comment: tells the receiver to initiate a Stream 13 transfer with the DSNAME = TCID
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F11R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 19, 11, secs_receive_S19F11R)
def secs_receive_S19F11R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S19F11R.'''
ok = True
while ok: # break out of loop on error
# expect TCID
# TCID A:36 (always) The identity of a transfer container specified as a 36 character string with runs of 8, 4, 4, 4, and 12 characters joined by hyphens
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("A:"):
ok = False
break
TCID = (pylist0[1] if len(pylist0) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 19, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S19F11R
| S19F12 | Send PDE Acknowledge |
Sent by Host and Equipment |
Comment: Header only. The transfer result status is sent in S19F13.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F12 Python Parse reply
rcr = sp.sendSecsMsg(19, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# no data expected
return # finished ok
# end while(ok)
# end def
| S19F13R | TransferContainer Report |
Sent by Host and Equipment |
Comment: Acknowledges the receipt of a TransferContainer using S13. Verification of transferred PDEs is rrequired when received by equipment.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 19, 13, secs_receive_S19F13R)
def secs_receive_S19F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S19F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:n {L:4 UID SENDRSPSTAT VERIFYRSPSTAT STATUSTXT}
# UID A:36 (always) See SEMI E139. A unique identifier for a PDE consisting of a 36 character string with runs of 8, 4, 4, 4, and 12 characters separated by hyphens
# SENDRSPSTAT U1:1 (always) Return codes for the Send PDE request, non-zero means failure
# VERIFYRSPSTAT U1:1 (always) PDE verification result, 0 success, 10 none, other error
# STATUSTXT A:80 (always) status response description
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 5 or pylist1[0] != "L:4":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
UID = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
SENDRSPSTAT = int(pylist2[1])
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
VERIFYRSPSTAT = int(pylist2[1])
pylist2 = lsplit(pylist1[4])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
STATUSTXT = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 19, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S19F13R
| S19F14 | TransferContainer Report Ack |
Sent by Host and Equipment |
Comment: header only acknowledges the receipt S19F13R
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F14 Python Parse reply
rcr = sp.sendSecsMsg(19, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# no data expected
return # finished ok
# end while(ok)
# end def
| S19F15R | Request PDE Resolution |
Sent by Host Only |
Comment: Request the equipment to resolve PDEs in the target. n can be 0 for no InputMap
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 19, 15, secs_receive_S19F15R)
def secs_receive_S19F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S19F15R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 TARGETPDE {L:n {L:2 PDEREF RESOLUTION}}
# TARGETPDE A:36 (always) the UID of the target PDE, a 36 character string with runs of 8,4,4,4, and 12 characters joined by hyphens.
# PDEREF A:36 (always) The UID of a PDE or of a PDE group formatted as a 36 character string with runs of 8, 4, 4, 4, and 12 characters joined by hyphens.
# RESOLUTION A:36 (always) the UID of a PDE
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETPDE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
PDEREF = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RESOLUTION = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 19, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S19F15R
| S19F16 | PDE Resolution Data |
Sent by Equipment Only |
Comment: The output map of the recipe structure. L:m has resolved PDEREF. n can be 0, n >= m
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F16 Python Parse reply
rcr = sp.sendSecsMsg(19, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:m {L:2 PDEREF RESOLUTION}} {L:n {L:3 UID RESPDESTAT STATUSTXT}}
# PDEREF A:36 (always) The UID of a PDE or of a PDE group formatted as a 36 character string with runs of 8, 4, 4, 4, and 12 characters joined by hyphens.
# RESOLUTION A:36 (always) the UID of a PDE
# UID A:36 (always) See SEMI E139. A unique identifier for a PDE consisting of a 36 character string with runs of 8, 4, 4, 4, and 12 characters separated by hyphens
# RESPDESTAT U1:1 (always) status codes for PDE resolution
# STATUSTXT A:80 (always) status response description
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for m in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[m])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
PDEREF = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RESOLUTION = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
UID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
RESPDESTAT = int(pylist3[1])
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
STATUSTXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S19F17R | Verify PDE Request |
Sent by Host Only |
Comment: n can be 0 when there is no InputMap
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 19, 17, secs_receive_S19F17R)
def secs_receive_S19F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S19F17R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 TARGETPDE {L:n {L:2 PDEREF RESOLUTION}} VERIFYTYPE VERIFYDEPTH
# TARGETPDE A:36 (always) the UID of the target PDE, a 36 character string with runs of 8,4,4,4, and 12 characters joined by hyphens.
# PDEREF A:36 (always) The UID of a PDE or of a PDE group formatted as a 36 character string with runs of 8, 4, 4, 4, and 12 characters joined by hyphens.
# RESOLUTION A:36 (always) the UID of a PDE
# VERIFYTYPE U1:1 (always) chooses the type of verification
# VERIFYDEPTH U1:1 (always) whether to check only the target, or the target and all referenced PDEs
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
TARGETPDE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 3 or pylist2[0] != "L:2":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
PDEREF = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RESOLUTION = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
VERIFYTYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
VERIFYDEPTH = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 19, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S19F17R
| S19F18 | PDE Verification Result |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F18 Python Parse reply
rcr = sp.sendSecsMsg(19, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 VERIFYSUCCESS {L:n {L:3 UID VERIFYRSPSTAT STATUSTXT}}
# VERIFYSUCCESS TF:1 (always) True if no errors were found
# UID A:36 (always) See SEMI E139. A unique identifier for a PDE consisting of a 36 character string with runs of 8, 4, 4, 4, and 12 characters separated by hyphens
# VERIFYRSPSTAT U1:1 (always) PDE verification result, 0 success, 10 none, other error
# STATUSTXT A:80 (always) status response description
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "TF:1":
ok = False
break
VERIFYSUCCESS = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
UID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
VERIFYRSPSTAT = int(pylist3[1])
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
STATUSTXT = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S19F19R | S19 Multi-block Inquire |
Sent by Host and Equipment |
Comment: SECS-I request permission to send multi-block S19F1,3,5,6,13,15,17. Not required for HSMS.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F19R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 19, 19, secs_receive_S19F19R)
def secs_receive_S19F19R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S19F19R.'''
ok = True
while ok: # break out of loop on error
# expect DATALENGTH
# DATALENGTH U4:1 (varies) total bytes of the message body
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
#(typeDATALENGTH, lengthDATALENGTH) = pylist0[0].split(':')
DATALENGTH = (pylist0[1] if len(pylist0) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 19, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S19F19R
| S19F20 | S19 Multi-block Grant |
Sent by Host and Equipment |
Comment: Usage is not required by the standard. Should not have been included in the standard.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S19F20 Python Parse reply
rcr = sp.sendSecsMsg(19, 19, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect GRANT
# GRANT B:1 (always) multiblock grant code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "B:1":
ok = False
break
GRANT = sp.binToInt(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S20F1R | SetSRO Attributes Request |
Sent by Host Only |
Comment: E170 SRO intitialization, enums are inverted booleans so Hume has renamed them
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 1, secs_receive_S20F1R)
def secs_receive_S20F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F1R.'''
ok = True
while ok: # break out of loop on error
# expect L:6 OBJID OBJTYPE AUTOPOST_DISABLE AUTOCLEAR_DISABLE RETAINRECIPE_DISABLE AUTOCLOSE
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# AUTOPOST_DISABLE U1:1 (always) Disable automatic posting of recipes to RMS preceeding SRO move to Local state (E171)
# AUTOCLEAR_DISABLE U1:1 (always) Disable automatic clear of recipes on SRO transition to Local (E171)
# RETAINRECIPE_DISABLE U1:1 (always) Disable automatic retention of recipes on disconnect
# AUTOCLOSE U2:1 (always) Interaction timeout for closing operator session, 0 is no limit
pylist0 = lsplit(TSN_data)
if len(pylist0) != 7 or pylist0[0] != "L:6":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
AUTOPOST_DISABLE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
AUTOCLEAR_DISABLE = int(pylist1[1])
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RETAINRECIPE_DISABLE = int(pylist1[1])
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1 or pylist1[0] != "U2:1":
ok = False
break
AUTOCLOSE = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S20F1R
| S20F2 | SetSRO Attributes Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F2 Python Parse reply
rcr = sp.sendSecsMsg(20, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect SSAACK
# SSAACK U1:1 (always) service completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
SSAACK = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S20F3R | GetOperationIDList Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 3, secs_receive_S20F3R)
def secs_receive_S20F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F3R.'''
ok = True
while ok: # break out of loop on error
# expect L:3 OBJID OBJTYPE OPETYPE
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S20F3R
| S20F4 | GetOperationIDList Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F4 Python Parse reply
rcr = sp.sendSecsMsg(20, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:n OPEID} GOILACK
# OPEID A:16 (always) recipe operation identifier
# GOILACK U1:1 (always) completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
OPEID = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
GOILACK = int(pylist1[1])
return # finished ok
# end while(ok)
# end def
| S20F5R | OpenConnectionEvent Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 5, secs_receive_S20F5R)
def secs_receive_S20F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F5R.'''
ok = True
while ok: # break out of loop on error
# expect L:7 OBJID OBJTYPE OPETYPE RMSUSERID RMSPWD EQUSERID OPEID
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# RMSUSERID A:64 (always) SRO userID
# RMSPWD A:64 (always) password of SRO user
# EQUSERID A:64 (always) Equipment userID for recipe use authentication
# OPEID A:16 (always) recipe operation identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) != 8 or pylist0[0] != "L:7":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMSUSERID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
RMSPWD = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
EQUSERID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[7])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S20F5R
| S20F6 | OpenConnectionEvent Acknowledge |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F6 Python Parse reply
rcr = sp.sendSecsMsg(20, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 OPEID OCEACK
# OPEID A:16 (always) recipe operation identifier
# OCEACK U1:1 (always) event completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OCEACK = int(pylist1[1])
return # finished ok
# end while(ok)
# end def
| S20F7R | CloseConnectionEvent Send |
Sent by Equipment Only |
Comment: a request to close a connection
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F7R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 7, secs_receive_S20F7R)
def secs_receive_S20F7R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F7R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 OBJID OBJTYPE OPETYPE OPEID
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S20F7R
| S20F8 | CloseConnectionEvent Acknowledge |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F8 Python Parse reply
rcr = sp.sendSecsMsg(20, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 OPEID CCEACK
# OPEID A:16 (always) recipe operation identifier
# CCEACK U1:1 (always) event completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
CCEACK = int(pylist1[1])
return # finished ok
# end while(ok)
# end def
| S20F9R | ClearOperation Request |
Sent by Host Only |
Comment: clear all recipes for the Operation ID
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F9R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 9, secs_receive_S20F9R)
def secs_receive_S20F9R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F9R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 OBJID OBJTYPE OPETYPE OPEID
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S20F9R
| S20F10 | ClearOperation Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F10 Python Parse reply
rcr = sp.sendSecsMsg(20, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect COACK
# COACK U1:1 (always) service completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
COACK = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S20F11R | GetRecipeXIDList Request |
Sent by Host Only |
Comment: query recipes for the Operation ID
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F11R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 11, secs_receive_S20F11R)
def secs_receive_S20F11R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F11R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 OBJID OBJTYPE OPETYPE OPEID
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S20F11R
| S20F12 | GetRecipeXIDList Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F12 Python Parse reply
rcr = sp.sendSecsMsg(20, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:n {L:9 TIMESTAMP OPEID ASSGNID COPYID REVID RecID VERID TYPEID EQID}} GRXLACK
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# OPEID A:16 (always) recipe operation identifier
# ASSGNID U1:1 (always) Assigner of the RecipeXID Base Part
# COPYID U1:1 (always) Recipe copy type
# REVID A:256 (always) recipe revision information related to SRO
# RecID A:n (always) recipe spec or ppid
# VERID A:n (always) composite key with RecipeID to identify a unique recipe
# TYPEID U1:1 (always) recipe type
# EQID A:256 (always) recipe specification of compatible equipment
# GRXLACK U1:1 (always) service completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 10 or pylist2[0] != "L:9":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
OPEID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
ASSGNID = int(pylist3[1])
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
COPYID = int(pylist3[1])
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
REVID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RecID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[7])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
VERID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[8])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
TYPEID = int(pylist3[1])
pylist3 = lsplit(pylist2[9])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
EQID = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
GRXLACK = int(pylist1[1])
return # finished ok
# end while(ok)
# end def
| S20F13R | DeleteRecipe Request |
Sent by Host Only |
Comment: delete specified recipes
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 13, secs_receive_S20F13R)
def secs_receive_S20F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 OBJID OBJTYPE OPETYPE OPEID {L:9 TIMESTAMP OPEID ASSGNID COPYID REVID RecID VERID TYPEID EQID}
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# OPEID A:16 (always) recipe operation identifier
# ASSGNID U1:1 (always) Assigner of the RecipeXID Base Part
# COPYID U1:1 (always) Recipe copy type
# REVID A:256 (always) recipe revision information related to SRO
# RecID A:n (always) recipe spec or ppid
# VERID A:n (always) composite key with RecipeID to identify a unique recipe
# TYPEID U1:1 (always) recipe type
# EQID A:256 (always) recipe specification of compatible equipment
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) != 10 or pylist1[0] != "L:9":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
OPEID = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
ASSGNID = int(pylist2[1])
pylist2 = lsplit(pylist1[4])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
COPYID = int(pylist2[1])
pylist2 = lsplit(pylist1[5])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
REVID = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[6])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
RecID = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[7])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
VERID = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[8])
if len(pylist2) < 1 or pylist2[0] != "U1:1":
ok = False
break
TYPEID = int(pylist2[1])
pylist2 = lsplit(pylist1[9])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
EQID = (pylist2[1] if len(pylist2) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S20F13R
| S20F14 | DeleteRecipe Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F14 Python Parse reply
rcr = sp.sendSecsMsg(20, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect DRRACK
# DRRACK U1:1 (always) service completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
DRRACK = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S20F15R | WriteRecipe Request |
Sent by Host Only |
Comment: n is the number of recipes
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 15, secs_receive_S20F15R)
def secs_receive_S20F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F15R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 OBJID OBJTYPE OPETYPE OPEID {L:n {L:10 TIMESTAMP OPEID ASSGNID COPYID REVID RecID VERID TYPEID EQID RCPBODYA}}
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# OPEID A:16 (always) recipe operation identifier
# ASSGNID U1:1 (always) Assigner of the RecipeXID Base Part
# COPYID U1:1 (always) Recipe copy type
# REVID A:256 (always) recipe revision information related to SRO
# RecID A:n (always) recipe spec or ppid
# VERID A:n (always) composite key with RecipeID to identify a unique recipe
# TYPEID U1:1 (always) recipe type
# EQID A:256 (always) recipe specification of compatible equipment
# RCPBODYA A:n (varies) user defined recipe body, list allowed
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 11 or pylist2[0] != "L:10":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
OPEID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
ASSGNID = int(pylist3[1])
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
COPYID = int(pylist3[1])
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
REVID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RecID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[7])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
VERID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[8])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
TYPEID = int(pylist3[1])
pylist3 = lsplit(pylist2[9])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
EQID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[10])
if len(pylist3) < 1:
ok = False
break
#(typeRCPBODYA, lengthRCPBODYA) = pylist3[0].split(':')
RCPBODYA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S20F15R
| S20F16 | WriteRecipe Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F16 Python Parse reply
rcr = sp.sendSecsMsg(20, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect WRACK
# WRACK U1:1 (always) service completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
WRACK = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S20F17R | ReadRecipe Request |
Sent by Host Only |
Comment: n is the number of recipes
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 17, secs_receive_S20F17R)
def secs_receive_S20F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F17R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 OBJID OBJTYPE OPETYPE OPEID {L:n {L:9 TIMESTAMP OPEID ASSGNID COPYID REVID RecID VERID TYPEID EQID}}
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# OPEID A:16 (always) recipe operation identifier
# ASSGNID U1:1 (always) Assigner of the RecipeXID Base Part
# COPYID U1:1 (always) Recipe copy type
# REVID A:256 (always) recipe revision information related to SRO
# RecID A:n (always) recipe spec or ppid
# VERID A:n (always) composite key with RecipeID to identify a unique recipe
# TYPEID U1:1 (always) recipe type
# EQID A:256 (always) recipe specification of compatible equipment
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 10 or pylist2[0] != "L:9":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
OPEID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
ASSGNID = int(pylist3[1])
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
COPYID = int(pylist3[1])
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
REVID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RecID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[7])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
VERID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[8])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
TYPEID = int(pylist3[1])
pylist3 = lsplit(pylist2[9])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
EQID = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S20F17R
| S20F18 | ReadRecipe Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F18 Python Parse reply
rcr = sp.sendSecsMsg(20, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:n {L:10 TIMESTAMP OPEID ASSGNID COPYID REVID RecID VERID TYPEID EQID RCPBODYA}} RRACK_S20
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# OPEID A:16 (always) recipe operation identifier
# ASSGNID U1:1 (always) Assigner of the RecipeXID Base Part
# COPYID U1:1 (always) Recipe copy type
# REVID A:256 (always) recipe revision information related to SRO
# RecID A:n (always) recipe spec or ppid
# VERID A:n (always) composite key with RecipeID to identify a unique recipe
# TYPEID U1:1 (always) recipe type
# EQID A:256 (always) recipe specification of compatible equipment
# RCPBODYA A:n (varies) user defined recipe body, list allowed
# RRACK_S20 U1:1 (always) service completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 11 or pylist2[0] != "L:10":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
OPEID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
ASSGNID = int(pylist3[1])
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
COPYID = int(pylist3[1])
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
REVID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RecID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[7])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
VERID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[8])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
TYPEID = int(pylist3[1])
pylist3 = lsplit(pylist2[9])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
EQID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[10])
if len(pylist3) < 1:
ok = False
break
#(typeRCPBODYA, lengthRCPBODYA) = pylist3[0].split(':')
RCPBODYA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
RRACK_S20 = int(pylist1[1])
return # finished ok
# end while(ok)
# end def
| S20F19R | QueryRecipeXIDList Event Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F19R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 19, secs_receive_S20F19R)
def secs_receive_S20F19R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F19R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 OBJID OBJTYPE OPETYPE OPEID
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S20F19R
| S20F20 | QueryRecipeXIDList Event Acknowledge |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F20 Python Parse reply
rcr = sp.sendSecsMsg(20, 19, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 OPEID {L:n {L:9 TIMESTAMP OPEID ASSGNID COPYID REVID RecID VERID TYPEID EQID}} QRXLEACK
# OPEID A:16 (always) recipe operation identifier
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# OPEID A:16 (always) recipe operation identifier
# ASSGNID U1:1 (always) Assigner of the RecipeXID Base Part
# COPYID U1:1 (always) Recipe copy type
# REVID A:256 (always) recipe revision information related to SRO
# RecID A:n (always) recipe spec or ppid
# VERID A:n (always) composite key with RecipeID to identify a unique recipe
# TYPEID U1:1 (always) recipe type
# EQID A:256 (always) recipe specification of compatible equipment
# QRXLEACK U1:1 (always) event completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 10 or pylist2[0] != "L:9":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
OPEID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
ASSGNID = int(pylist3[1])
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
COPYID = int(pylist3[1])
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
REVID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RecID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[7])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
VERID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[8])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
TYPEID = int(pylist3[1])
pylist3 = lsplit(pylist2[9])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
EQID = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
QRXLEACK = int(pylist1[1])
return # finished ok
# end while(ok)
# end def
| S20F21R | QueryRecipe Event Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F21R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 21, secs_receive_S20F21R)
def secs_receive_S20F21R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F21R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 OBJID OBJTYPE OPETYPE OPEID {L:n {L:9 TIMESTAMP OPEID ASSGNID COPYID REVID RecID VERID TYPEID EQID}}
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# OPEID A:16 (always) recipe operation identifier
# ASSGNID U1:1 (always) Assigner of the RecipeXID Base Part
# COPYID U1:1 (always) Recipe copy type
# REVID A:256 (always) recipe revision information related to SRO
# RecID A:n (always) recipe spec or ppid
# VERID A:n (always) composite key with RecipeID to identify a unique recipe
# TYPEID U1:1 (always) recipe type
# EQID A:256 (always) recipe specification of compatible equipment
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 10 or pylist2[0] != "L:9":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
OPEID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
ASSGNID = int(pylist3[1])
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
COPYID = int(pylist3[1])
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
REVID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RecID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[7])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
VERID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[8])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
TYPEID = int(pylist3[1])
pylist3 = lsplit(pylist2[9])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
EQID = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 22, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S20F21R
| S20F22 | QueryRecipe Event Acknowledge |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F22 Python Parse reply
rcr = sp.sendSecsMsg(20, 21, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect QREACK
# QREACK U1:1 (always) event completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
QREACK = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S20F23R | PostRecipe Event Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F23R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 23, secs_receive_S20F23R)
def secs_receive_S20F23R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F23R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 OBJID OBJTYPE OPETYPE OPEID {L:n {L:10 TIMESTAMP OPEID ASSGNID COPYID REVID RecID VERID TYPEID EQID RCPBODYA}}
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# OPEID A:16 (always) recipe operation identifier
# ASSGNID U1:1 (always) Assigner of the RecipeXID Base Part
# COPYID U1:1 (always) Recipe copy type
# REVID A:256 (always) recipe revision information related to SRO
# RecID A:n (always) recipe spec or ppid
# VERID A:n (always) composite key with RecipeID to identify a unique recipe
# TYPEID U1:1 (always) recipe type
# EQID A:256 (always) recipe specification of compatible equipment
# RCPBODYA A:n (varies) user defined recipe body, list allowed
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 11 or pylist2[0] != "L:10":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
OPEID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
ASSGNID = int(pylist3[1])
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
COPYID = int(pylist3[1])
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
REVID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RecID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[7])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
VERID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[8])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
TYPEID = int(pylist3[1])
pylist3 = lsplit(pylist2[9])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
EQID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[10])
if len(pylist3) < 1:
ok = False
break
#(typeRCPBODYA, lengthRCPBODYA) = pylist3[0].split(':')
RCPBODYA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 24, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S20F23R
| S20F24 | PostRecipe Event Acknowledge |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F24 Python Parse reply
rcr = sp.sendSecsMsg(20, 23, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect PREACK
# PREACK U1:1 (always) event completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
PREACK = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S20F25R | SetPRC Attributes Request |
Sent by Host Only |
Comment: MAXNUMBERLIST is {L:n MAXNUMBER}
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F25R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 25, secs_receive_S20F25R)
def secs_receive_S20F25R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F25R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 OBJID OBJTYPE {L:n MAXNUMBER} MAXTIME PRCPREEXECHK
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# MAXNUMBER U2:1 (always) subspace maximum
# MAXTIME U2:1 (always) maximum minutes for a PEM recipe to be preserved in PRC post use, 0 means NA
# PRCPREEXECHK U1:1 (always) Enable Pre-Execution checking
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1 or pylist2[0] != "U2:1":
ok = False
break
MAXNUMBER = int(pylist2[1])
if not ok: break
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or pylist1[0] != "U2:1":
ok = False
break
MAXTIME = int(pylist1[1])
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
PRCPREEXECHK = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 26, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S20F25R
| S20F26 | SetPRC Attributes Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F26 Python Parse reply
rcr = sp.sendSecsMsg(20, 25, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect SPAACK
# SPAACK U1:1 (always) service completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
SPAACK = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S20F27R | PreSpecifyRecipe Request |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F27R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 27, secs_receive_S20F27R)
def secs_receive_S20F27R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F27R.'''
ok = True
while ok: # break out of loop on error
# expect L:6 OBJID OBJTYPE OPETYPE OPEID PRJOBID {L:n {L:9 TIMESTAMP OPEID ASSGNID COPYID REVID RecID VERID TYPEID EQID}}
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
# PRJOBID A:n (always) process job identifier
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# OPEID A:16 (always) recipe operation identifier
# ASSGNID U1:1 (always) Assigner of the RecipeXID Base Part
# COPYID U1:1 (always) Recipe copy type
# REVID A:256 (always) recipe revision information related to SRO
# RecID A:n (always) recipe spec or ppid
# VERID A:n (always) composite key with RecipeID to identify a unique recipe
# TYPEID U1:1 (always) recipe type
# EQID A:256 (always) recipe specification of compatible equipment
pylist0 = lsplit(TSN_data)
if len(pylist0) != 7 or pylist0[0] != "L:6":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 10 or pylist2[0] != "L:9":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
OPEID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
ASSGNID = int(pylist3[1])
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
COPYID = int(pylist3[1])
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
REVID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RecID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[7])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
VERID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[8])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
TYPEID = int(pylist3[1])
pylist3 = lsplit(pylist2[9])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
EQID = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 28, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S20F27R
| S20F28 | PreSpecifyRecipe Acknowledge |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F28 Python Parse reply
rcr = sp.sendSecsMsg(20, 27, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect PSRACK
# PSRACK U1:1 (always) service completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
PSRACK = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S20F29R | QueryPJRecipeXIDList Event Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F29R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 29, secs_receive_S20F29R)
def secs_receive_S20F29R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F29R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 OBJID OBJTYPE OPETYPE OPEID PRJOBID
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
# PRJOBID A:n (always) process job identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 30, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S20F29R
| S20F30 | QueryPJRecipeXIDList Event Acknowledge |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F30 Python Parse reply
rcr = sp.sendSecsMsg(20, 29, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 {L:n {L:9 TIMESTAMP OPEID ASSGNID COPYID REVID RecID VERID TYPEID EQID}} QPRKEACK
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# OPEID A:16 (always) recipe operation identifier
# ASSGNID U1:1 (always) Assigner of the RecipeXID Base Part
# COPYID U1:1 (always) Recipe copy type
# REVID A:256 (always) recipe revision information related to SRO
# RecID A:n (always) recipe spec or ppid
# VERID A:n (always) composite key with RecipeID to identify a unique recipe
# TYPEID U1:1 (always) recipe type
# EQID A:256 (always) recipe specification of compatible equipment
# QPRKEACK U1:1 (always) event completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 10 or pylist2[0] != "L:9":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
OPEID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
ASSGNID = int(pylist3[1])
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
COPYID = int(pylist3[1])
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
REVID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RecID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[7])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
VERID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[8])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
TYPEID = int(pylist3[1])
pylist3 = lsplit(pylist2[9])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
EQID = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
QPRKEACK = int(pylist1[1])
return # finished ok
# end while(ok)
# end def
| S20F31R | Pre-Exe Check Event Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F31R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 31, secs_receive_S20F31R)
def secs_receive_S20F31R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F31R.'''
ok = True
while ok: # break out of loop on error
# expect L:6 OBJID OBJTYPE OPETYPE OPEID PRJOBID CHKINFO
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
# PRJOBID A:n (always) process job identifier
# CHKINFO A:n (varies) User defined value, any type
pylist0 = lsplit(TSN_data)
if len(pylist0) != 7 or pylist0[0] != "L:6":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1:
ok = False
break
#(typeCHKINFO, lengthCHKINFO) = pylist1[0].split(':')
CHKINFO = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 32, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S20F31R
| S20F32 | Pre-Exe Check Event Acknowledge |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F32 Python Parse reply
rcr = sp.sendSecsMsg(20, 31, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 PECRSLT {L:n {L:10 TIMESTAMP OPEID ASSGNID COPYID REVID RecID VERID TYPEID EQID RCPBODYA}} PECEACK
# PECRSLT U1:1 (always) RMS result
# TIMESTAMP A:32 (always) ECV TimeFormat controls format, 0=A:12 YYMMDDHHMMSS, 1=A:16 YYYYMMDDHHMMSScc,2=YYYY-MM-DDTHH:MM:SS.s[s]*{Z|+hh:mm|-hh:mm}
# OPEID A:16 (always) recipe operation identifier
# ASSGNID U1:1 (always) Assigner of the RecipeXID Base Part
# COPYID U1:1 (always) Recipe copy type
# REVID A:256 (always) recipe revision information related to SRO
# RecID A:n (always) recipe spec or ppid
# VERID A:n (always) composite key with RecipeID to identify a unique recipe
# TYPEID U1:1 (always) recipe type
# EQID A:256 (always) recipe specification of compatible equipment
# RCPBODYA A:n (varies) user defined recipe body, list allowed
# PECEACK U1:1 (always) event completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
PECRSLT = int(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 11 or pylist2[0] != "L:10":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
TIMESTAMP = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
OPEID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
ASSGNID = int(pylist3[1])
pylist3 = lsplit(pylist2[4])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
COPYID = int(pylist3[1])
pylist3 = lsplit(pylist2[5])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
REVID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[6])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
RecID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[7])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
VERID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[8])
if len(pylist3) < 1 or pylist3[0] != "U1:1":
ok = False
break
TYPEID = int(pylist3[1])
pylist3 = lsplit(pylist2[9])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
EQID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[10])
if len(pylist3) < 1:
ok = False
break
#(typeRCPBODYA, lengthRCPBODYA) = pylist3[0].split(':')
RCPBODYA = (pylist3[1] if len(pylist3) == 2 else None)
if not ok: break
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
PECEACK = int(pylist1[1])
return # finished ok
# end while(ok)
# end def
| S20F33R | PreSpecifyRecipe Event Send |
Sent by Equipment Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F33R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 20, 33, secs_receive_S20F33R)
def secs_receive_S20F33R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S20F33R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 OBJID OBJTYPE OPETYPE OPEID PRJOBID
# OBJID A:80 (varies) E39 object identifier 1-80 chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OBJTYPE A:40 (varies) object class name, chars 0x20-0x7e but not >, ?, *, or ~. Does not begin or end with space.
# OPETYPE U1:1 (always) recipe operation type
# OPEID A:16 (always) recipe operation identifier
# PRJOBID A:n (always) process job identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1:
ok = False
break
#(typeOBJID, lengthOBJID) = pylist1[0].split(':')
OBJID = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
#(typeOBJTYPE, lengthOBJTYPE) = pylist1[0].split(':')
OBJTYPE = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or pylist1[0] != "U1:1":
ok = False
break
OPETYPE = int(pylist1[1])
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
OPEID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
PRJOBID = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 20, 34, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S20F33R
| S20F34 | PreSpecifyRecipe Event Acknowledge |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S20F34 Python Parse reply
rcr = sp.sendSecsMsg(20, 33, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect PSREACK
# PSREACK U1:1 (always) event completion code
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or pylist0[0] != "U1:1":
ok = False
break
PSREACK = int(pylist0[1])
return # finished ok
# end while(ok)
# end def
| S21F1R | Item Load Inquire |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F1R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 21, 1, secs_receive_S21F1R)
def secs_receive_S21F1R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S21F1R.'''
ok = True
while ok: # break out of loop on error
# expect L:4 ITEMTYPE ITEMID ITEMLENGTH ITEMVERSION
# ITEMTYPE A:n (always) case-sensitve type of an item
# ITEMID A:256 (always) item identifier
# ITEMLENGTH U4:1 (varies) sum of item part lengths in bytes, not a message length, type U4 or U8
# ITEMVERSION A:n (always) version value, empty for unknown, default is time last modified YYYYMMDDhhmmsscc in the equipment timezone
pylist0 = lsplit(TSN_data)
if len(pylist0) != 5 or pylist0[0] != "L:4":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeITEMLENGTH, lengthITEMLENGTH) = pylist1[0].split(':')
ITEMLENGTH = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMVERSION = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 21, 2, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S21F1R
| S21F2 | Item Load Grant |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F2 Python Parse reply
rcr = sp.sendSecsMsg(21, 1, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 ITEMACK ITEMERROR
# ITEMACK B:1 (always) item request return code
# ITEMERROR A:1024 (always) error description, empty on success
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ITEMACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMERROR = (pylist1[1] if len(pylist1) == 2 else "")
return # finished ok
# end while(ok)
# end def
| S21F3R | Item Send |
Sent by Host and Equipment |
Comment: Each part except the last one is max size.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F3R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 21, 3, secs_receive_S21F3R)
def secs_receive_S21F3R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S21F3R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 ITEMTYPE ITEMID ITEMLENGTH ITEMVERSION {L:n ITEMPART}
# ITEMTYPE A:n (always) case-sensitve type of an item
# ITEMID A:256 (always) item identifier
# ITEMLENGTH U4:1 (varies) sum of item part lengths in bytes, not a message length, type U4 or U8
# ITEMVERSION A:n (always) version value, empty for unknown, default is time last modified YYYYMMDDhhmmsscc in the equipment timezone
# ITEMPART A:n (varies) component part of an item, may be data type A:n or B:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeITEMLENGTH, lengthITEMLENGTH) = pylist1[0].split(':')
ITEMLENGTH = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMVERSION = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeITEMPART, lengthITEMPART) = pylist2[0].split(':')
ITEMPART = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 21, 4, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S21F3R
| S21F4 | Item Send Acknowledge |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F4 Python Parse reply
rcr = sp.sendSecsMsg(21, 3, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 ITEMACK ITEMERROR
# ITEMACK B:1 (always) item request return code
# ITEMERROR A:1024 (always) error description, empty on success
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ITEMACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMERROR = (pylist1[1] if len(pylist1) == 2 else "")
return # finished ok
# end while(ok)
# end def
| S21F5R | Item Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F5R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 21, 5, secs_receive_S21F5R)
def secs_receive_S21F5R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S21F5R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 ITEMTYPE ITEMID
# ITEMTYPE A:n (always) case-sensitve type of an item
# ITEMID A:256 (always) item identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMID = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 21, 6, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S21F5R
| S21F6 | Item Data |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F6 Python Parse reply
rcr = sp.sendSecsMsg(21, 5, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:7 ITEMACK ITEMERROR ITEMTYPE ITEMID ITEMLENGTH ITEMVERSION {L:n ITEMPART}
# ITEMACK B:1 (always) item request return code
# ITEMERROR A:1024 (always) error description, empty on success
# ITEMTYPE A:n (always) case-sensitve type of an item
# ITEMID A:256 (always) item identifier
# ITEMLENGTH U4:1 (varies) sum of item part lengths in bytes, not a message length, type U4 or U8
# ITEMVERSION A:n (always) version value, empty for unknown, default is time last modified YYYYMMDDhhmmsscc in the equipment timezone
# ITEMPART A:n (varies) component part of an item, may be data type A:n or B:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 8 or pylist0[0] != "L:7":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ITEMACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMERROR = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
#(typeITEMLENGTH, lengthITEMLENGTH) = pylist1[0].split(':')
ITEMLENGTH = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMVERSION = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[7])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1:
ok = False
break
#(typeITEMPART, lengthITEMPART) = pylist2[0].split(':')
ITEMPART = (pylist2[1] if len(pylist2) == 2 else None)
if not ok: break
return # finished ok
# end while(ok)
# end def
| S21F7R | Item Type List Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F7R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 21, 7, secs_receive_S21F7R)
def secs_receive_S21F7R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S21F7R.'''
ok = True
while ok: # break out of loop on error
# expect ITEMTYPE
# ITEMTYPE A:n (always) case-sensitve type of an item
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1 or not pylist0[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist0[1] if len(pylist0) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 21, 8, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S21F7R
| S21F8 | Item Type List Results |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F8 Python Parse reply
rcr = sp.sendSecsMsg(21, 7, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:7 ITEMACK ITEMERROR ITEMTYPE {L:n {L:3 ITEMID ITEMLENGTH ITEMVERSION}}
# ITEMACK B:1 (always) item request return code
# ITEMERROR A:1024 (always) error description, empty on success
# ITEMTYPE A:n (always) case-sensitve type of an item
# ITEMID A:256 (always) item identifier
# ITEMLENGTH U4:1 (varies) sum of item part lengths in bytes, not a message length, type U4 or U8
# ITEMVERSION A:n (always) version value, empty for unknown, default is time last modified YYYYMMDDhhmmsscc in the equipment timezone
pylist0 = lsplit(TSN_data)
if len(pylist0) != 8 or pylist0[0] != "L:7":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ITEMACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMERROR = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ITEMID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1:
ok = False
break
#(typeITEMLENGTH, lengthITEMLENGTH) = pylist3[0].split(':')
ITEMLENGTH = (pylist3[1] if len(pylist3) == 2 else None)
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ITEMVERSION = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S21F9R | Supported Item Type List Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F9R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 21, 9, secs_receive_S21F9R)
def secs_receive_S21F9R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S21F9R.'''
ok = True
while ok: # break out of loop on error
# no data expected
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 21, 10, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S21F9R
| S21F10 | Supported Item Type List Result |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F10 Python Parse reply
rcr = sp.sendSecsMsg(21, 9, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 ITEMACK ITEMERROR {L:n ITEMTYPE}
# ITEMACK B:1 (always) item request return code
# ITEMERROR A:1024 (always) error description, empty on success
# ITEMTYPE A:n (always) case-sensitve type of an item
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ITEMACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMERROR = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S21F11 | Item Delete |
Sent by Host Only |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F11 Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 21, 11, secs_receive_S21F11)
def secs_receive_S21F11(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S21F11.'''
ok = True
while ok: # break out of loop on error
# expect L:2 ITEMTYPE {L:n ITEMID}
# ITEMTYPE A:n (always) case-sensitve type of an item
# ITEMID A:256 (always) item identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
ITEMID = (pylist2[1] if len(pylist2) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 21, 12, transactionID, reply_data)
return # finished ok
# here by break from while ok
# bad data
sp.sendS9( 7, header)
# end recv_S21F11
| S21F12 | Item Delete Acknowledge |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F12 Python Parse reply
rcr = sp.sendSecsMsg(21, 11, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:3 ITEMACK ITEMTYPE {L:n {L:3 ITEMID ITEMACK ITEMERROR}}
# ITEMACK B:1 (always) item request return code
# ITEMTYPE A:n (always) case-sensitve type of an item
# ITEMID A:256 (always) item identifier
# ITEMACK B:1 (always) item request return code
# ITEMERROR A:1024 (always) error description, empty on success
pylist0 = lsplit(TSN_data)
if len(pylist0) != 4 or pylist0[0] != "L:3":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ITEMACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
for n in range(1, len(pylist1)):
pylist2 = lsplit(pylist1[n])
if len(pylist2) != 4 or pylist2[0] != "L:3":
ok = False
break
pylist3 = lsplit(pylist2[1])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ITEMID = (pylist3[1] if len(pylist3) == 2 else "")
pylist3 = lsplit(pylist2[2])
if len(pylist3) < 1 or pylist3[0] != "B:1":
ok = False
break
ITEMACK = sp.binToInt(pylist3[1])
pylist3 = lsplit(pylist2[3])
if len(pylist3) < 1 or not pylist3[0].startswith("A:"):
ok = False
break
ITEMERROR = (pylist3[1] if len(pylist3) == 2 else "")
if not ok: break
return # finished ok
# end while(ok)
# end def
| S21F13R | Request Permission To Send Item |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F13R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 21, 13, secs_receive_S21F13R)
def secs_receive_S21F13R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S21F13R.'''
ok = True
while ok: # break out of loop on error
# expect L:5 ITEMTYPE ITEMID ITEMLENGTH ITEMVERSION ITEMPARTCOUNT
# ITEMTYPE A:n (always) case-sensitve type of an item
# ITEMID A:256 (always) item identifier
# ITEMLENGTH U4:1 (varies) sum of item part lengths in bytes, not a message length, type U4 or U8
# ITEMVERSION A:n (always) version value, empty for unknown, default is time last modified YYYYMMDDhhmmsscc in the equipment timezone
# ITEMPARTCOUNT U4:1 (always) total number of item parts as split for transfer
pylist0 = lsplit(TSN_data)
if len(pylist0) != 6 or pylist0[0] != "L:5":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeITEMLENGTH, lengthITEMLENGTH) = pylist1[0].split(':')
ITEMLENGTH = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMVERSION = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
ITEMPARTCOUNT = int(pylist1[1])
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 21, 14, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S21F13R
| S21F14 | Grant Permission To Send Item |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F14 Python Parse reply
rcr = sp.sendSecsMsg(21, 13, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 ITEMACK ITEMERROR
# ITEMACK B:1 (always) item request return code
# ITEMERROR A:1024 (always) error description, empty on success
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ITEMACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMERROR = (pylist1[1] if len(pylist1) == 2 else "")
return # finished ok
# end while(ok)
# end def
| S21F15R | Item Request |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F15R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 21, 15, secs_receive_S21F15R)
def secs_receive_S21F15R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S21F15R.'''
ok = True
while ok: # break out of loop on error
# expect L:2 ITEMTYPE ITEMID
# ITEMTYPE A:n (always) case-sensitve type of an item
# ITEMID A:256 (always) item identifier
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMID = (pylist1[1] if len(pylist1) == 2 else "")
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 21, 16, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S21F15R
| S21F16 | Item Request Grant |
Sent by Host and Equipment |
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F16 Python Parse reply
rcr = sp.sendSecsMsg(21, 15, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:7 ITEMACK ITEMERROR ITEMTYPE ITEMID ITEMLENGTH ITEMVERSION ITEMPARTCOUNT
# ITEMACK B:1 (always) item request return code
# ITEMERROR A:1024 (always) error description, empty on success
# ITEMTYPE A:n (always) case-sensitve type of an item
# ITEMID A:256 (always) item identifier
# ITEMLENGTH U4:1 (varies) sum of item part lengths in bytes, not a message length, type U4 or U8
# ITEMVERSION A:n (always) version value, empty for unknown, default is time last modified YYYYMMDDhhmmsscc in the equipment timezone
# ITEMPARTCOUNT U4:1 (always) total number of item parts as split for transfer
pylist0 = lsplit(TSN_data)
if len(pylist0) != 8 or pylist0[0] != "L:7":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ITEMACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMERROR = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1:
ok = False
break
#(typeITEMLENGTH, lengthITEMLENGTH) = pylist1[0].split(':')
ITEMLENGTH = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMVERSION = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[7])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
ITEMPARTCOUNT = int(pylist1[1])
return # finished ok
# end while(ok)
# end def
| S21F17R | Send Item Part |
Sent by Host and Equipment |
Comment: Each part message is not sent until the reply for the previous part is received.
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F17R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 21, 17, secs_receive_S21F17R)
def secs_receive_S21F17R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S21F17R.'''
ok = True
while ok: # break out of loop on error
# expect L:8 ITEMTYPE ITEMID ITEMLENGTH ITEMVERSION ITEMINDEX ITEMPARTCOUNT ITEMPARTLENGTH ITEMPART
# ITEMTYPE A:n (always) case-sensitve type of an item
# ITEMID A:256 (always) item identifier
# ITEMLENGTH U4:1 (varies) sum of item part lengths in bytes, not a message length, type U4 or U8
# ITEMVERSION A:n (always) version value, empty for unknown, default is time last modified YYYYMMDDhhmmsscc in the equipment timezone
# ITEMINDEX U4:1 (always) 1-based index of a component part, 0 means done, 0xFFFFFFFF means abort
# ITEMPARTCOUNT U4:1 (always) total number of item parts as split for transfer
# ITEMPARTLENGTH U4:1 (always) length of a specific item part presumably in bytes
# ITEMPART A:n (varies) component part of an item, may be data type A:n or B:n
pylist0 = lsplit(TSN_data)
if len(pylist0) != 9 or pylist0[0] != "L:8":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMID = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[3])
if len(pylist1) < 1:
ok = False
break
#(typeITEMLENGTH, lengthITEMLENGTH) = pylist1[0].split(':')
ITEMLENGTH = (pylist1[1] if len(pylist1) == 2 else None)
pylist1 = lsplit(pylist0[4])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMVERSION = (pylist1[1] if len(pylist1) == 2 else "")
pylist1 = lsplit(pylist0[5])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
ITEMINDEX = int(pylist1[1])
pylist1 = lsplit(pylist0[6])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
ITEMPARTCOUNT = int(pylist1[1])
pylist1 = lsplit(pylist0[7])
if len(pylist1) < 1 or pylist1[0] != "U4:1":
ok = False
break
ITEMPARTLENGTH = int(pylist1[1])
pylist1 = lsplit(pylist0[8])
if len(pylist1) < 1:
ok = False
break
#(typeITEMPART, lengthITEMPART) = pylist1[0].split(':')
ITEMPART = (pylist1[1] if len(pylist1) == 2 else None)
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 21, 18, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S21F17R
| S21F18 | Send Item Part Acknowledge |
Sent by Host and Equipment |
Comment: Non-zero ITEMACK causes retry (32) or abort
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F18 Python Parse reply
rcr = sp.sendSecsMsg(21, 17, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:2 ITEMACK ITEMERROR
# ITEMACK B:1 (always) item request return code
# ITEMERROR A:1024 (always) error description, empty on success
pylist0 = lsplit(TSN_data)
if len(pylist0) != 3 or pylist0[0] != "L:2":
ok = False
break
pylist1 = lsplit(pylist0[1])
if len(pylist1) < 1 or pylist1[0] != "B:1":
ok = False
break
ITEMACK = sp.binToInt(pylist1[1])
pylist1 = lsplit(pylist0[2])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMERROR = (pylist1[1] if len(pylist1) == 2 else "")
return # finished ok
# end while(ok)
# end def
| S21F19R | Item Type Feature Support |
Sent by Host and Equipment |
Comment: a zero-length list requests for all supported item types, new 6/2022
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F19R Python Receive message - add next line to setup
# sp = your SecsEquip or SecsHost connection object
sp.messageTypeAdd( 21, 19, secs_receive_S21F19R)
def secs_receive_S21F19R(sp, stream:int, function:int, send_reply:bool, transactionID:int, TSN_data:str, header:str):
'''Receive SECS Message S21F19R.'''
ok = True
while ok: # break out of loop on error
# expect L:n ITEMTYPE
# ITEMTYPE A:n (always) case-sensitve type of an item
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) < 1 or not pylist1[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist1[1] if len(pylist1) == 2 else "")
if not ok: break
if send_reply:
# TODO create reply message, use ljoin() to build from parts
sp.sendReply( 21, 20, transactionID, reply_data)
return # finished ok
# here by break from while ok
# end recv_S21F19R
| S21F20 | Item Type Feature Support Results |
Sent by Host and Equipment |
Comment: On success, ITEMACK is zero and ITEMERROR shall be zero-length
Format:
from dmhclient import lindex, ljoin, lsplit, RcResult
# S21F20 Python Parse reply
rcr = sp.sendSecsMsg(21, 19, True, sendMsg, True)
ok = True
while ok: # break out of loop on error
if rcr.rc != 0: ;# abort, S9, or timeout
ok = False
break # handle failure here and return?
TSN_data = rcr.result
# expect L:n {L:4 ITEMACK ITEMERROR ITEMTYPE ITEMTYPESUPPORT}
# ITEMACK B:1 (always) item request return code
# ITEMERROR A:1024 (always) error description, empty on success
# ITEMTYPE A:n (always) case-sensitve type of an item
# ITEMTYPESUPPORT U4:1 (always) bitfield to specify which S21Fx messages accepted
pylist0 = lsplit(TSN_data)
if len(pylist0) < 1:
ok = False
break
for n in range(1, len(pylist0)):
pylist1 = lsplit(pylist0[n])
if len(pylist1) != 5 or pylist1[0] != "L:4":
ok = False
break
pylist2 = lsplit(pylist1[1])
if len(pylist2) < 1 or pylist2[0] != "B:1":
ok = False
break
ITEMACK = sp.binToInt(pylist2[1])
pylist2 = lsplit(pylist1[2])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
ITEMERROR = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[3])
if len(pylist2) < 1 or not pylist2[0].startswith("A:"):
ok = False
break
ITEMTYPE = (pylist2[1] if len(pylist2) == 2 else "")
pylist2 = lsplit(pylist1[4])
if len(pylist2) < 1 or pylist2[0] != "U4:1":
ok = False
break
ITEMTYPESUPPORT = int(pylist2[1])
if not ok: break
return # finished ok
# end while(ok)
# end def